Does PSTWO hurt the bald head when using a burning disc?

Of course it hurts. I've used the Metal Gear Solid 3 US version of the burned,-- I can't help it, I can't buy it. When you read, you pay attention to the sound of the machine, and the noise is louder than usual, because the speed is much faster, and it is difficult to read.

Let's buy it. A bald head is hundreds. The plate is only a few bucks.

Injuries are definitely going to hurt. A little bit of disk *** will be a little better. But what I don't understand is that there are 5 yuan a D disk everywhere, why don't you buy that?

Personally, I don't think there is any harm to the PS2 by burning the disk, because since the 3900X, the PS2 supports *** + -R, which is no problem for the bald head. In view of protecting the bald head, it is necessary to use high-quality master + low-speed burning to ensure the correctness of the data. It is recommended to use Mitsubishi and TDK's disks, and Weibao's is already very poor due to the fact that it is getting cheaper and cheaper, so it is not recommended.

I can tell you clearly that when you use ***'s burning disc, it reads even smoother than some D's. The PS2 head is 5 times lighter, so try to use 4 times when carving. The quality of the dish must be good.

Upstairs said tdk.,I feel average.,Good classic games I'm all engraved by Mitsubishi.,Read that Shun.。

D A lot of disc dyes are not good, of course, it is a pressure plate, and it must always be durable.

The kind of 5 yuan a pressure plate outside is very bad, if your own plate ***, it is definitely much better than the pressure plate. Personally, I also recommend TDK's disk, I think it's very easy to use.

Use a hard drive, of course, not all games support it.

A pressure plate of 5 pieces will definitely hurt the bald head, and the genuine pressure plate will hardly hurt.

If you carve the plate, the brand of *** is definitely better.

Pan, Mitsubishi, Weibao's recommendation, followed by the domestic rhenium.

The carved disc is better, and the bald head is scrapped if the pressure plate is not good.

Injury: How to say this problem, the bald head is originally a consumable, no matter how good the quality of the disc is, the bald head will have a certain amount of loss.

You play PS2 generally buy pirated discs Pirated discs have low cost and poor quality Great loss of bald heads PS1's pirated discs are more bald due to their long production age Worse production technology and quality So it hurts bald heads more Actually, I don't think it matters A bald head is more than 100 I used PS2 to play PS1's Resident Evil and all the super robot wars Final Fantasy have been opened up A total of at least 1000 hours of play Bald head reading efficiency is not much worse.

No, it depends on the quality of the disc.

Pirated disks will hurt.

So don't use pirated ones as much as possible.

It has nothing to do with PS1.,It just depends on the quality of the engraved disc you buy.,If it's the kind of 10 big box, of course it will hurt.。

It doesn't matter if the PS2 is dismantled, but the PS Two is more necessary than necessary. Because the bald head can be seen directly.

Pure"Add water to a cotton swab and gently wipe from the inside out, and you're good to go!

Yes. It's just that the transmit power is different.

There is only one. Go find a burner and see if there is a second bald head in it?

Win7 comes with a burning function,Stuff it into the burning disc and drag the files you want to burn into the volume label of the disc in my computer interface。

nero

This software is the best and has a high success rate.

The method is very simple, prepare the ISO image file, next, the owner remembers, select the ISO file and right-click and open it with Nero software... Don't open the nero software and look for the ISO file, in that case, your disk will be burned.

Hey, it took me a lot of time to engrave when I started engraving, and I found out later. Cups!

Don't listen to the copy party.,Use this burning software.,Others are easy to burn bad disks.,The first time the software is used has a trial period.,If you want to use it for a long time, you have to buy a genuine version.,Or find a cracked version to use! Hope it helps.

The recorder you buy should bring a burning software, generally nero burning software, after installation, open the software and follow the above menu to operate, but your question is too general, I can only answer it like this, it depends on what you burn, and whether it is a *** burning disc or a cd burning disc, whether it is a one-time burning or reusable, each use method is slightly different, if you have any questions, you can ask me again!

Start by making a disc image.

Use burning software to load the image burning.

This is the step recommended by Nero, and physically contiguous files can effectively prevent buffer underload!

If you are using Win XP or below, then first you must have a burning software, Nero. Once the platter has been formatted, it is ready to be burned.

If your operating system is Vista or Win7, then you don't need any software, just format it and burn it, and the operation is the easiest copy and paste.

Just watch the tutorials in NetEase Academy or Tianji Academy.

1.Burner.

2.Burning software (general recorder belt).

3.Empty disks. 1) Put it on an empty plate.

2) Select the data type in the software, add data, or copy the disc and start burning.

It's better to burn software with ones, the software is small, and it's free.

If you use the live format, you can use the disc like a USB flash drive, and if you use the one-time format, you can only put the file on the disc at once.

Buy an empty disk and put it in your computer. Turn on the recorder and select the things to be burned, and click OK to OK.

This has nothing to do with hard disks, it's the same as reading and writing ordinary hard disks.

If you buy something, you will use it, and there will be wear and tear when you use it, and the normal service life of the optical drive and recorder is only 1-2 years, and the specific life span depends on the use. If you want to prolong the service life of the recorder, you should be careful not to let it work for a long time, such as reading the disc for a long time, and burning for a long time, you can generally burn for about half an hour and rest for 5-10 minutes. There are also burning discs that try to use well-known brands, such as Mitsubishi, Weibao, Rehenium, Sony, BenQ, etc., and often using a burning disc of poor quality will also affect the service life of the recorder.

What do you do when you buy a recorder without burning?

Note: When not using the optical drive, do not place the disc in the optical drive.

Of course it will, otherwise how will the optical drive wear out after a long time, but if you don't burn a lot of it, it's no problem.