What should I do if the network cable port of my computer is loose?

Cause analysis: one. Loosening caused by deformation of the contact spring blade inside the network cable socket.

Solution: 1. Shut down the computer, remove the power adapter, and remove the battery;

2. Bend the tip of a sewing needle and correct the deformed spring in the network cable socket.

Two. The entire network cable socket is loose.

Solution: Send it to the maintenance department for replacement and welding.

The only way to do this is to change the port.

That crystal head? Why don't you just start from scratch? It's cheap.

1. If it is loose and poor contact caused by the deformation of the contact spring in the network cable socket, the following methods can be used: turn off the computer, remove the power adapter, remove the battery, and then bend the tip of a sewing needle to correct the deformed spring in the network cable socket.

2. If the network cable socket is loose, it can only be sent to the maintenance department for replacement and welding, if you know how to repair, you can also repair it yourself, but you must do a good job of anti-static measures in the welding process.

1. If it is loose and poor contact caused by the deformation of the contact spring in the network cable socket, the following methods can be used: turn off the computer and remove the power adapter.

Remove the battery, then bend the tip of a sewing needle, and correct the deformed spring blade in the network cable socket.

2. If the network cable is loose without the socket of the world, it will only be sent to the maintenance department for replacement and welding.

If the network cable socket on the wall is loose, the problem is not big, and it only needs a simple repair to solve it. Here are a few workarounds:

1.Replug the network cable: After determining the connection between the plug and the socket, plug the network cable plug back into the socket.

2.Replace the socket: If the socket is more seriously damaged, it is recommended to replace it with a new Li Shi socket.

3.Fixed socket: Repair the socket to the wall and add some fixtures, such as screws, to the original foundation.

4.Replace the network cable: If the socket is seriously damaged, you can consider replacing the entire network cable.

In short, it is very simple to repair the network cable socket cavity on the wall, and Wu Chaochi only needs to take reasonable solutions according to the specific situation. If you're not sure how to fix it, you can seek help from a professional technician.

If you don't want to change the street, hold it with a toothpick.

If it is too loose, please deal with it as follows.

1. This problem cannot be fixed manually by yourself;

2. Disassemble the motherboard of the laptop, use a hot bomb gun or tin furnace to remove the loose network port connector, and then install a new network port connector;

3. Immediately take back the place where you bought the computer, apply for a new one, or apply to return it to the factory for maintenance.

If you change the crystal head or unstable, it is recommended to go to the after-sales service to solve it, within 15 days is replaced, if it is really a problem with the network card seat, directly replace the new machine.

First change the crystal head to see if it will be loose, if it will still be loose, it is recommended that you change the network card.