How to add watermarks in batches in Photoshop

Tool: Photoshop

2. Click Actions, under the Actions button, click the circle icon to create a new group and action, named "Watermark".

3. Click on the text tool to add the watermark text to be added. Text can also be adjusted for transparency.

4. Merge visible layers. Store & Close**.

5. Click the box button in the picture to stop recording the action.

6. Batch processing. Select the "Watermark" you just made for both groups and actions, and then click Select to select the folder you want to watermark. Once you're sure, you're done.

Open an unwatermarked ** in PS.

Click Actions.

Under the action button on the right side of PS, click the circle icon to create a new group and action, named it "Watermark".

Click Text Tools on the left toolbar of PS and add the watermark text you want to add. As shown in the figure below: the text should be of moderate size and placed in the appropriate position, which can be seen clearly and does not affect the overall appearance. Text can also be adjusted for transparency.

Merge visible layers.

Store & Close**.

Click the box button in the picture to stop recording the action.

Batch processing. Select the "Watermark" you just made for both groups and actions, and then click Select to select the folder you want to watermark. Step to read.

Then you can rest and let the ps deal with it. However, it is emphasized here that the ** of batch processing must be the same size, and the size of the watermark added in batches will be consistent, beautiful and neat.

Method steps.

1. Open Photoshop CS6, click the menu bar - File - Open - load a ** that needs to set a text watermark.

2. Click Menu Bar - Window - Actions to open the action group workbench window of Photshop.

3. Click the new ** mark to create a new group category, and then click the new action icon to create a new action, and the recording will automatically start after the new one.

The names are watermarked for easy use in the future.

4. Use Photoshop's text tool to add the text watermark content you want to set on **, click the menu bar - Layers - Merge Visible Layers.

5. After that, click the menu bar - File - Storage, and the watermark will be stored in this one**.

6. Turn off this one** and click the stop button to stop recording.

7. Create a new folder on the desktop, and copy all the ** that need to be added to the watermark in batches into the folder.

After that, click on the menu bar - File - Auto - Batch processing.

8. Select the group of the batch window to create the group before, select the action to create the new action before, select the folder where the ** is located (the previously created folder) at the source folder, click OK, photoshop will automatically start to work, and then open the **folder after the work is completed, you can see that all ** have been added with watermarks.

Step 2, the next step is to import ** into the software, you can click [Add File] or directly drag ** to the software to import, please import in batches at one time and add in batches to save time.

Step 3, then set the watermark, the software supports text watermark and logo watermark two ways, choose according to your actual needs, and then set the relevant parameters of the watermark (such as: size, color, transparency, size ratio, position and other parameters), on which you can preview the appearance of the watermark in real time.

Step 4: After the watermark setting is completed, you can click the [Start Conversion] button to start the process of adding watermarks in batches. Then the software will automatically open a folder, and the ** after adding the watermark will be saved here, this folder can also be found on the computer desktop, and the folder name is "Yousu Watermark Factory".

Step 5, through the case, you can see that all ** have been added with watermarks in batches.

2017 super practical PS batch watermark removal tips.

Removing the watermark is a technical job, but sometimes, if we can find the original watermark, we can quickly remove the watermark with some lazy methods, like the following picture, we can find the original watermark in the blank space, as long as it is copied out, and then the watermark on the clothes can be easily removed with the following method. (This method only works if you can find the original watermark**).

Original image:

Effects:

1. Open the one you want to remove the watermark with PS'**。

2. Press the shortcut key M to switch to the selection tool.

3. Press the mouse and drag to select the watermark you want to remove. (Note: To select a complete watermark) 4, press the shortcut key Ctrl+J to create a new layer of the watermark selected in the third step.

5. Move the newly created layer to see the watermark layer.

6. Then select the mixed protection mode of the layer as color lightening.

The watermark disappears. 7. Press the shortcut key Ctrl+I to change the layer to an inverted state.

8. Move the watermark layer to align the watermark on the basemap.

9. Copy the watermark layer and cover the watermark of the base map to remove all watermarks. Final Result:

For ps,After the previous introduction,I believe most people are already familiar with some,PS as a set of**and**synthesis of multi-functional and powerful software,In the process of use,Due to the complex functions of the software,And can not use the software well,I talked about the method of "using PS cutout" before,Next, share how to use PS batch to add watermarks。

This operation takes Dell computer as an example, and the specific operation steps are as follows:

Material tools

P.S. Software PC.

Method:

The first step is to select [File] in PS and open it;

The second step is to select [Open] to open the ** that needs to be watermarked, or use the combination shortcut key Ctrl+O;

The third step is to select **, select [Window] to open;

Step 4: Open [Actions] in [Window], or use the combination shortcut key alt+F9;

Step 5: In the pop-up window, click the circle icon to create a new group named "Watermark";

Step 6, immediately after that, create a new action named "Watermark";

Step 7, find the text button on the left toolbar"t", click Open;

The eighth step is to edit the font style and size of the macro morning album at the top;

The ninth step is to enter the watermark text;

Step 10: Select [Layer] above and open it;

Step 11: Select and open Merge Layers.

Step 12, select [File] - [Save] and open it;

Step 13: Click OK to save;

The fourteenth step is to stop recording the action;

Step 15: Select [Batch Processing] in [File] - [Automatic];

Step 17, open the batch processing folder;

Finally, it is emphasized that the ** of batch processing must be the same size, and the size of the watermark added in batches will be consistent, and the beautiful and neat will be neat.

1. First of all, open the PS software on the computer, click the "Window" option button in the menu bar, and click to open the "Action" function in the drop-down action bar.

2. Click the "Create New Action" button at the bottom of the "Action" window to create a new action named "Watermark", and then start recording automatically.

<>4. Select the Tool Text tool to add text.

5. Then click the "Stop" option button in the action dialog box to set it.

6. Then select the Auto Batch option button under the File option in the menu bar.

7. Open the "Batch" window, tick the box before "Open Command in Overwrite Action", and "Save as Command in Overwrite Action", after confirmation, PS will automatically add watermarks in batches.

Photoshop is a processing tool that we commonly use, and sometimes we can add watermarks in order to ensure uniqueness. Here is the method I have compiled to add watermark to Photoshop for your reference.

Open the PS software and create a new transparent canvas, for example, 200 x 200 pixels.

Enter the contents of the watermark on the canvas, fill in the color, and modify the transparency.

Duplicate the layer once and reduce the transparency.

After selecting two layers, press -Transform-Rotate, or press the shortcut Ctrl+T to rotate them at a certain angle.

- Customize patterns, save and name patterns.

<> take a look at the renderings after adding the watermark.

1. Execute the window - action, open the action panel, and the shortcut key is alt+f9.

2. To create a new watermark action, click the new action button at the bottom right of the action panel, give the new action a name in the name, and click Record.

3. Execute "File - Open" or press Ctrl+O to open a ** that needs to be watermarked.

<>6. At this time, you can see that the operation panel "Watermark 1" records all the steps of the watermark operation we just added to the single **, and now click the "Save Action" button to stop and save the action.

7. The next step is batch processing, click on the automatic batch processing of files to enter the batch processing dialog box.

8. Set it in the pop-up dialog box, select the new "Watermark" action just now, select "Folder" after "Source", select the folder you want to add watermark, and click OK.

9. Then select the folder for the target, select the folder that is stored after the watermark, or create a new folder. Check this before the Save As command in the Overwrite action.

10. It will be processed quickly, and then open the destination folder (the folder stored after adding the watermark) and you will find that the ** has been watermarked.

Children's shoes that don't know how to PS take a look at this method, quickly add watermarks in batches:

Step 2, click any red box as shown in the figure below, add all the ** that need to add watermarks to the software, the software supports adding **watermarks in batches, you can execute many ** at a time, saving time.

Step 3, after adding **, the place where the watermark setting will appear in the lower right position, the softwareText watermark and logo watermark are supported, and you can set different styles, colors, positions, transparency, sizes, and other parameters. In this case, we set the text watermark.

Step 4, then click the [Start Conversion] button to start the batch watermark program, wait for a while, the software will automatically pop up a folder, and the ** after adding the watermark will all be saved here.

Step 5, as you can see through the case, ** successfully added the text watermark set.