Why can t the wide generation be connected, what should I do if the wide generation can t be connect

Sometimes, when using QQ, there is a login error, and the message "Error**115713" is displayed. This is mainly caused by the installation of firewalls, and the following is an example of Rising Firewall to briefly explain how to solve this problem. Double-click "Rising Firewall" to open "Rising Firewall", click "Settings" in the drop-down menu and click to open "Detailed Settings", select and click "Access Details" in "Detailed Settings", find and double-click "QQ" or click "Rules" to open "Access Rules" in the "General" option and change "General Mode".

Solve the case.

。。Redone the system?? Let's see if the IP address is right.

I've been in your kind of situation too, and there's only one that you can get on. At first, I thought it was a telecom ghost.,Later, I found out that it was a virus.,It's good to reinstall the system.。。

It's just that according to my situation, the specific downstairs friend answered.

I don't know what you mean, but I guess you opened an ADSL at home, and you want to bring 3 machines

This depends on whether the telecom has a sealed switch in your place, if not, buy a 4-port switch, you can bring 3 machines.

Where do I see the error? This should not be the case if you use routing. You should elaborate on how you connect to the Internet.

There are several reasons for this: whether the payment password is wrong, whether it is installed and connected, whether the broadband device is turned on.

Call 10000 customer service and ask to find out.

There should be an error message! What**?

There is a problem with your moden, which is causing the connection to be unsuccessful.

That is, you can't connect to a remote server.

You can try restarting the lower moden

If it is very annoying, it is time to find a telecom to change the cat.

Right-click on my computer - Properties, find Hardware - click Device Manager - then find Network Adapter - right-click and you will uninstall! After uninstalling and restarting the machine, the new network card will be automatically discovered, and then the driver can be installed according to the requirements!

Error 678 prompts that the remote computer is not responding, confirm that there is no problem with the external line, and then right-click on my computer - Properties, find Hardware - Point Device Manager - then find the network adapter - right-click to deactivate and then enable, no need to press the network card again, no, and then install the driver.

Right-click on my computer....Properties....Device Manager, find the network adapter, right-click to uninstall it, and restarting the computer will automatically prompt you how to install this driver.

Are you using telecom broadband, or is it something else? Check if there is a problem with the wiring, and then try to restart the adsl modem. Look at the tab behind the modem, go to the modem settings page, and set it again.

The meaning of error prompt 678 is that the remote computer is not responding, which means that the computer sends instructions to the network card to send data outward, including the transmission of ** line, and the port of the terminal board of the local office (telecommunications office room end) processes the data transmission problem in the process of returning data to the computer.

Possible Causes:

1. The arrears have been stopped.

2. The operator's computer room is faulty.

3. The line between your home and the operator is faulty.

It's very simple to ask, such as telecom 10000, mobile 10086, etc.

Go to the control panel, find the Add and Remove program, and find the network card driver installer inside.

Check to see if your account password is correct. Whether your broadband can be connected to another computer, and whether your computer can be connected to the Internet under other normal broadband network cables.

It's a cat problem.

It is estimated that the quality of the cat is poor.

You try to change someone else's cat ...

It's your network cable that has a problem, ask about the broadband overcome, ask them and it should be solved

If it wasn't for the virus, it was probably an IP configuration problem, which I had encountered, and finally it was solved by modifying the IP address.

Call the customer service, report for repair, and they will come over to show you.

Haha, this question I used to have a lot of encounters! It's annoying, and telecommunications can't solve it!

Hower, by chance, found a way to get a deal out of it. Speak up and share it with woshidxj.

1It is best to connect in the morning or when you feel that there are few people on the Internet, and I will connect at 4 o'clock in the morning, using the starry sky.

2 most important points. Do not disconnect the internet when the phone is turned off. Do not turn off the cat's power directly. Until the machine is completely turned off and the fan is not turning, the power of the cat can be turned off. Otherwise, next time you want to connect again.

3 As far as I know, the reason for this is that the system thinks that you are connected to the scriptures. So I can't get on it in the second company!

4. Beat me so hard.

5 I wish you a speedy connection.

691 Access denied because the username and/or password are invalid on this domain.

A 774 transient fault caused a failed connection attempt. Please try connecting again.

691 is an incorrect account or password.

In the past, I was in exactly the same situation as you, and the telecom people came to check that there was a problem with the cat, and I went to the telecom company to change it, and it was free to change the cat within one year of opening an account, and if there was a problem, there was a problem with the broadband circuit.

Telecom's own problems have nothing to do with you.

Call 10000 and have them deal with it.

This problem may be that the network cable you connect the cat to the router is broken, and there is no signal when the WAN light is on, so try to change the cable.

Big brother, the WAN end is used to plug in the network cable.

It is necessary to plug the ** line into the moden and then change the network cable of the modem to the route.

Finally, the route is connected to the computer.

I didn't set the dial, see the instructions in IE input to set the dial.

The main reason is that the air is humid on rainy days, which will cause poor line insulation, so similar failures occur.

The technical term for telecommunications is earth.