It is better to partition in DOS, or to use the partition that comes with the system installation di

Upstairs!!

What is the relationship between partitioning mode and hard disk boot!!

When you partition, ask it to boot, and it can boot!!

If the partition doesn't start, it's because you didn't set up the active partition, you didn't have the system installed, and maybe only you stupid will encounter such a result.

Originally, I just looked at it, and when I saw that there was such a clumsy person as you, I would also say a few words!

1. There is no general name for the partition under DOS, fdisk is just a kind of partition software!

2. The partition in DOS is flexible and practical, you can make it whatever you want! There are many kinds of partitioning software used under DOS, some are in English and some are in Chinese! I like to use English and the chances of mistakes are very small!

In fact, the meaning of those English is very simple, with a little practice, you can memorize it!

You're right, you should learn it, it's not a difficult thing! If it's an emergency, you can use the latter!

The partition machinery under the system is simple and convenient, and you can use it today!

3. No problem! Pay attention to the partition and then observe and check whether each partition meets your own requirements, and whether the primary partition is an active partition! (i.e., become a boot partition) do not need to take out the disc when restarting, and then boot the disc without selecting the partition operation, you can directly install the system!

Zhu Shun!!

It's all the same, if you don't enable booting, it's recommended to use the installation disk to divide it, so that it will automatically join the boot on the partition Otherwise, the partition may not start.

The system disk can be partitioned.

System disk partitioning method:

2. In the "Menu Bar" at the top of the page, select "Partition", and then click "Split Partition", at this time, a page like the following will pop up, here, we can adjust the size of the partition by ourselves.

3. After selecting the size of each partition, click Start at the bottom of the page to execute the partition.

4. After the partition operation is completed, click the Save Changes button on the toolbar again, and then restart the computer to complete a new partition.

The "system disk" is a logical disk! How to repartition? The hard drive won't just be 2G

2G hard drive, dizzy Do you add a good zero less?

The commonly used partitioning tool nowadays is PQ

There is a very detailed ** here.

How to burn the system.

Tool: Nero burning software.

How to burn an image bootable file.

After the hard disk is partitioned, three forms of partition states will be formed; Primary partitions, extended partitions, and non-DOS partitions.

Non-DOS partitions.

Non-DOS partition is a special form of partitioning, which is to divide an area of the hard disk separately for another operating system, and for the operating system of the main partition, it is a piece of storage space that is divided. Only non-DOS partitioned operating systems can manage and use this storage area.

Primary partition. The primary partition is a relatively simple partition, usually located in the front area of the hard disk, forming a logical C disk. The main boot program is part of it, and the slippage sequence in this segment is mainly used to detect the correctness of the hard disk partition, and determine the active partition, which is responsible for handing over the boot rights to the DOS or other operating systems of the active partition.

If this program is corrupted, it will not boot from the hard disk, but it will be able to read and write to the hard disk after booting from a floppy drive or optical drive.

Extend the partition. The concept of extended partition is more complex, and it is easy to confuse hard disk partition with logical disk. The fourth byte of the partition table is the partition type value, and the normal bootable basic DOS partition value greater than 32MB is 06, and the extended DOS partition value is 05. If you change the basic DOS partition type to 05, you will not be able to start the system and cannot read and write the data in it.

Partitioning and formatting a hard disk is a step that every hard drive must go through. Here I will explain how to use fdisk to partition hard disk.

The fdisk program is a partition software that comes with DOS and Windows systems, although its functions are not as good as some software, but it is very safe to use it to partition. Here's how to do it:

1) Enter the DOS mode. Boot in the system, appear"starting windows..."when pressed"f8"key, and then select it"command prompt only"You can enter the DOS mode.

2) Type"fdisk"Then press enter to enter.

4) The main menu of fdisk appears, to create partition please select"1"Enter again.

5) Create a primary partition and select it"1"After entering.

6) At this point you will be asked if you want to use the maximum free space as the primary partition if answered"y", then the software will divide all the disk space into a partition, answer"n"You can divide multiple partitions, for the current hard disk, it is generally relatively large, if it is divided into a partition, it is not easy to manage, so you can choose to enter"n"to divide into multiple partitions.

7) The software will prompt you to enter the size of the main partition, enter and press enter.

8) Press the Esc key when you're done to go back to the main menu.

9) For a hard drive, an active partition must be set before the operating system can boot, so we need to enter"2"Item.

10) This is the number that will prompt the user to enter the active partition, since there is only one partition, enter it"1"。When you're done, you'll see one in the status bar"a", indicating that the partition is active.

11) A hard disk can only have one primary partition, so if you want to divide the remaining hard disk space now, you must create an extended partition, go back to the main menu and select it"2"。

12) The program will prompt the user to enter the size of the extended partition.

13) After the extension partition is established, the information of the main partition and the extended partition will be displayed, press the esc key.

14) At this time, it will prompt that there is no logical disk, you can divide the entire extension partition into one logical disk, or divide it into several logical disks. Now you can enter the size of the first logical disk and press enter.

15) The information about the first disk will be displayed, and you will be asked to enter the size of the second disk.

16) When you're done, press the Esc key to go back to the main menu.

17) At this time, after pressing esc to exit the fdisk and restart, you can format the partition.

If you want to repartition a hard disk that has been partitioned, you must go to the third item to delete the partition in the main menu.

PS: Now there are many partitioning methods, you can start PE, and then use PE system partitioning, the speed is very fast, the general system disc has partitioning software.

Win7 can be partitioned directly in the disk management of the device manager, without DOS division.

Do you still reinstall the C drive in your system If you install it back, start it directly on the CD, directly use the system disk partition to remove the D drive, create a new partition, return the original C drive, and load the system to the C drive.

Right-click"Computer management"to partition in Disk Management.