Urgency Is the motherboard broken How is the motherboard broken?

Probably the result of your overclocking!

Clear the BIOSThere are generally two ways to do this:

1.Unplug the BIOS battery and short it for 5 minutes, short-circuit the BIOS faster, by connecting the positive and negative poles with conductors.

2.You can use a short jumper to clear the BIOS, the shorting method of various motherboards is different, please refer to the manual, do not guess the meaning of the jumper pins!

3.Press the INSERT button when you turn it on, and the CPU will run at its lowest frequency and then resume.

Let's try it first! No, look at the power supply !!

Flash the BIOS to its original state.

If it doesn't work, just use the replacement method, replace the CPU, graphics card, and motherboard one by one to see what the problem is.

You try to discharge the motherboard BIOS and restore the information in the BIOS to its original state. The specific method is to look at the manual, it should be to short the pins near the BIOS.

Pull off the motherboard battery and put it down! Try again!

Generally, motherboards don't burn out so easily!

At most, you can't do it!

It could be a power supply issue. or power supply issues. Double-check it!

There aren't many overclocking! The motherboard must be fine, check each interface.

Motherboard lights won't turn on? Oh, let's take it to a computer company, I guess that's the problem.

The motherboard is a precision circuit, and generally if the fuse is replaced, it can only be replaced in one piece.

What an original is this.

What an original is this.

If it is not professionally maintained, there are generally few such accessories, and precision electronics it pays attention to the model, but also pays attention to the degree of matching, some precision electronics do not support replacement, especially the black frame is broken.

How do they work.

I'm sorry, different circuit boards of precision electronics have different working principles, just like the wires installed in our homes, the principle of an integrated circuit used to describe the circuit board is actually similar. But a lot of circuit boards are nanotechnology, and there are a lot of subcircuits, and if the blade or something scratches, then it is also easy to cause damage.

Oh, oh, thank you.

You're welcome, and I wish you all the best and all the best.

1. It depends on which one is broken, if the capacitor is broken or a plug-in is broken, it can be repaired, but if the line or the north-south bridge or the chipset is burned, it is best not to repair it, because the cost is too high, it is not worth repairing, and it is better to buy a new one than to repair it.

2. If you are sure that the motherboard is broken, you can take it to the computer store to see, and it is free before the warranty period.

3. Professionals can rely on personal experience and some professional instruments to diagnose the fault of the motherboard, such as 4, such as a capacitor bursting or a chip is damaged. Then it can be done by replacing the appropriate pure resistant components.

Changing the components on a motherboard is definitely much cheaper than changing the entire motherboard, provided that you get a repair shop that specializes in repairing computer parts. The general computer installation shop is very vegetable, they only know how to find the right model with cavity motherboard to replace, talk about pants, and they do not have professional testing equipment.