Wireless router has a weak signal and a slow internet speed10

There are several reasons why wireless routers often drop calls:

The transmission power of the wireless router itself is low, resulting in a weak signal; If your router antenna is detachable, it is recommended to replace it with a 5db antenna; In this way, the signal is stronger;

Are the wireless network cards that the laptop accepts its signal compatible? If it is not compatible, it will be frequently disconnected; The solution is to update the wireless network card driver; Or if the encryption method is incompatible, there will be frequent drops, you can change the encryption method of the router's wireless key;

Signal interference; You can make a simple one, cut the can box into small branches, and then put it on the antenna of the wireless router;

It is recommended to place the router in the middle of the room, because the antenna used by the wireless router is generally an omnidirectional antenna, and its signal range is spherical;

Change the channel used by the router, there may be more routers used in this channel, resulting in weakened signal;

The above five points are generally common reasons for frequent drops in wireless routers, I hope it can help you; In addition, you can go to the customer service center of the JCG official website to see the FAQ, there are also many solutions about wireless routers.

If you have a DNS setting problem, you can set it up manually.

Inside the router.

It should be a problem with the power supply circuit or transformer.

Routing is a problem by suggesting that you empty the routing data and then try to rewrite the route.

Hello, wifi signal regardless of whether there is a network mobile phone and other equipment can be connected, the user can not use the network after connecting to wifi, first confirm whether your broadband line is smooth, you can check whether the indicator light of the broadband cat has LOS red light flashing, if there is a broadband failure, so the router's wifi can not use the network, at this time, the user can call the operator's customer service to report the fault processing, after the fault report, there will be staff to come to the door to troubleshoot.

If the broadband modem can be connected to the network normally, then it is a problem with the router, and you can check whether the network cable is connected correctly. If the network cable between the broadband modem and the router is normal, you can restore the router to its factory value, and then reset the router parameters to see if it can be restored to normal

2. Then open the browser and enter the management address and login password of the router.

3. After logging in to the background, click the setup wizard, and then fill in the corresponding parameters according to the wizard instructions.

<>6. After the wireless setting is completed, click Save, and then restart the router to use it normally.

<> wireless routers send signals across the board, and the closer the router is to obstacles, the more easily the signal is suppressed. Therefore, you should choose a high and spacious location in your home to place the router so that the signal can radiate downwards and reduce the blocking of obstacles and signal blind spots.

Routers transmit data information in the form of data packets. Electrical appliances, glass, and metal items will cause obvious interference to the signal, resulting in transmission blockage. Friends can keep the router away from the above categories of items to reduce interference.

1. If the router version is older, then regularly updating the firmware can ensure that the software of the router is in a good and efficient operating state.

2. If the wireless router at home has been used for too long, it will be a good choice to replace it with a new dual-antenna or multi-antenna router.

1. Buy a wifi repeater: plug the repeater into the socket at home, and the signal range and strength can be enhanced after debugging.

2. Reuse of old routers: Set the old router to AP mode, and then connect to the existing main router through the LAN port to expand the signal.

3. Adjust the antenna: Most router antennas are placed in a "ring", and in the vertical direction, the signal coverage will be wider. The antenna can be adjusted appropriately according to the distance and angle.

Usually the router is factory set to mixed mode with a set rate of 75%.

1. Adjust the rate: The partner can enter the security settings and adjust the rate of the router to the maximum.

2. Select Single Protocol: Set the mode to use only protocol.

Open the browser, enter the router address and username and password, check whether there is an unfamiliar device in the corresponding menu, and compare the IP address with your own hardware.

Then send the friends three magic weapons to prevent rubbing the net.

1. Set a complex password.

In the Tab or Security, select the WPA-PSK WPA2-PSK password and set a complex, easy-to-remember, and hard-to-guess password.

2. Disable the DHCP function.

In the Local Area Network (LAN) settings, disable the DHCP function to prevent automatic IP address assignment to wireless clients.

3. Change the default IP address.

If it defaults, it can be changed to prevent easy guessing.