0x6020187f Memory is unreadable

1. The application does not check for memory allocation failures, and there are many reasons for memory allocation failures, such as insufficient memory, and mismatch of system function versions. As a result, this kind of allocation failure is more common after the operating system has been in use for a long time, after installing a variety of applications (including inadvertently "installed" virus programs), changing a large number of system parameters and system files.

2. The application references an abnormal memory pointer due to its own bug.

1.Check your system for Trojans or viruses. Such programs often modify the system irresponsibly in order to control the system, resulting in operating system abnormalities. In general, we should strengthen our awareness of information security and never be curious about unclear executable procedures.

2.Update the operating system, let the operating system installer copy the correct version of the system files, and correct the system parameters. Sometimes there are bugs in the operating system itself, so pay attention to installing the official upgrade program.

3.Try out the new version of the app.

In general, let's reinstall the system! It's easier to solve this way.

2 possibilities.

1. This is more likely, there is a problem with your XP system, it would be nice if you redo the system.

2. Your memory is incompatible (this case is less).

You're going to set up virtual memory. Click on Computer Properties --Advanced --Performance Settings --Advanced --Virtual Memory Changes... After that, you set the memory. It should be good, give it a point.

Set up virtual memory because your memory is not compatible with the system.

Software issues The easiest way to do this is to register the DLLs directly

for %1 in (%windir%\system32\*.ocx) do regsvr32 /s %1

for %1 in (%windir%\system32\*.dll) do regsvr32 /s %1

This will take a long time, be patient, but it may take a reboot before the whole effect comes out. 【Tip】If you are afraid of typing mistakes, you can copy this command, and then click c: in the upper left corner of the command prompt, and use the "Paste" function below to make mistakes.

After the screen is completely still, don't rush to start other programs, just wait patiently, because the DLLs are still looking for a position. Don't do anything else until your light stops flashing.

360 is in conflict with other software.

Hello, the computer appears: [The memory cannot be read], this is the "software" you installed and the "memory" in the computer has a conflict!

1。No more, use [Compatibility Mode]: On the [Desktop Shortcut] of this software, right-click, Properties, [Compatibility], [Run this program with compatibility], [Tick], Apply, OK!

Or click: [Run this program as administrator], apply, OK!

2。If there is [Trojan horse or virus] interference in the computer, **"360 Security Guard" and "360 Antivirus Dual Engine Edition" or "Kingsoft Guard" and "Kingsoft Poison", it is recommended to "scan" viruses and Trojans to patch the "high-risk" and "important" [system vulnerabilities] on the computer! [System Repair], one-click repair!

Plugin Cleanup], clean up [Bad Review Plugin] immediately!

3。[Suspicious Startup Item], **"360 System First Aid Kit", or open the "360 System First Aid Kit" in the 360 Security Guard, [Function Collection], start first aid, and after finishing, restart the computer! After booting up, [File Recovery Area], click on:

Suspicious startup items and trojans, delete files completely!

Again: [System Repair], the whole cong silver burns the selection, fix it immediately! [Network Repair] to start the repair. Restart your computer!

Kingsoft First Aid Kit], check [Extended Scan], scan immediately, after completion, deal with it immediately, and restart the computer!

4。Your "** device", or "chat software", or "Internet Explorer", or "game" [program is unstable], or "the version is too old"! It is recommended to uninstall, ** the new one, or upgrade it to the [latest version]!

Internet Explorer, and beta software are not recommended to upgrade!

5。That is, you have installed two or more similar software (such as: two ** devices, two QQ, or multiple browsers, multiple anti-virus software, multiple online games, etc.)! Together, they are [incompatible], remove the "redundant" one!

6。You can find [Force Uninstall Software on Computer] in the "Start" menu in the lower left corner of your computer, and find the excess one to uninstall! After unloading, "strong cleaning" (unload when you see it, don't unload the useful ones)! When you're done, restart your computer!

7。If you can't do it again, start menu, run, enter cmd, press enter, and enter [Copy] in the command prompt:

for %1 in (%windir%\system32\*.ocx) do regsvr32 /s %1

Paste, press enter, and when you're done, type:

for %1 in (%windir%\system32\*.dll) do /s %1

Enter! Until screen scrolling stops, restart your computer!

9。Restart the computer, after booting up the computer brand, press "F8", enter the "Safe Mode", and select the cursor: [Last correct setting], press Enter, Enter, and see how it works!

10。It's really not a good idea: [one-click to restore the system or reinstall the system]!

The memory is loose or it is a program problem.

Hello, the situation you said is generally caused by system software, memory, and hard disk.

1 If the computer is unintentionally loaded with malware, or malicious programs are generated when surfing the Internet, it is recommended to use 360 Guard, Kingsoft Guardian and other software to clean up the garbage and kill the malware, which may be solved. It really doesn't work, reinstall and restore the system, you can solve the problems caused by the software.

2 If you can't enter the system, you can turn on the system after going to the system selection there press f8 to select the last correct configuration and security mode that works, and you may be able to enter the system.

3-point Start Menu Run Enter cmd and enter it at the Command Prompt.

for %1 in (%windir%\system32\*.dll) do s %1 and then Enter. Then let him run it and it should be solved.

4 Recently, the computer has been poisoned, unstable software has been installed, etc., it is recommended to take a full antivirus, uninstall the software that caused the problem, and reinstall another version, which may be solved. No more, it's OK to reinstall the system

5 If the memory module in the computer case is dusty, disassemble the case, remove the memory module, clean the memory gold finger, and reinstall it.

6. If the memory of the computer is bad for a long time, the parallel memory is bought, and the multiple memories are incompatible when used together, etc., it is recommended to replace the memory to solve the problem.

7 The computer has been used for a long time, the hard disk is broken, and the logical bad sectors can be repaired by repartitioning and installing the system, but it still doesn't work, then it's time to change the hard disk, and it can be solved by changing the hard disk.

If you are not professional, it is recommended to take it to a computer store to test, and then change it after the test is good.

Hope it helps!!

Look at the name of the soft armor in the upper left corner, and reinstall it after you see it.

0x0172f774 0x01f7f050 memory referenced by the instruction. The memory can't be a read workaround:

1. Start running regedit to enter the registry, under hkey local machine software microsoft windows currentversion explorer shellexecutehooks, there should be only one normal key value", and delete the others (of course, don't delete the default key).

If there is one (default) leave it alone, usually it is empty.

2.Start Run and enter cmd, press Enter, and enter in the Command Prompt.

for %1 in (%windir%\system32\*.ocx) do regsvr32 /s %1

Press Enter, and when you're done scrolling, type in again:

for %1 in (%windir%\system32\*.dll) do /s %1

Enter! Until screen scrolling stops, restart your computer!

Hello! The computer appears: [The memory cannot be read and written], the reason is more complicated, please prescribe the right medicine!

1。Misconfigured! [Restart, after the computer brand is out, press F8, Safe Mode, Last Correct Configuration, Enter, Enter]!

2。System vulnerability! [360 Security Guard or Kingsoft Guard, or Keniu Free Antivirus, Repair: High Risk and Important, Other Ignores]!

3。Software Conflict! [Uninstall infrequently used software to keep the system stable, especially the same type of software, incompatible]!

4。The software version is outdated! [Use: (Drive Life), Update: Graphics Driver, Sound Driver! Other software, override installation]!

5。Virus Trojan! [Anti-virus software, full disk with hidden scan and custom scan, after completion, quarantine, completely deleted]!

6。Bad review plugin! [Keniu Free Antivirus, Jinshan Guard, or Talk Chain Hall 360 Security Guard, Clean Up Bad Comment Plug-ins]!

7。Suspicious startups! [360 system first aid kit, start first aid, file recovery area, completely delete files]!

8。System file corruption! [Kingsoft First Aid Kit], Extended Scan, Scan Now, Process Now, Restart Computer]!

10。Instruction Repair Method! Start menu, run, enter cmd, press enter, enter in the command prompt (copy is sufficient):

for %1 in (%windir%\system32\*.ocx) do regsvr32 /s %1

Paste, press enter, and when you're done scrolling, type again:

for %1 in (%windir%\system32\*.dll) do /s %1

Enter! Until screen scrolling stops, restart your computer!

Error analysis: This error is caused by problematic memory (including in-house memory, L2 cache, and video memory), incompatible software (mainly remote control and antivirus soft pants), corrupted NTFS volumes, and problematic hardware (e.g., the PCI card itself is corrupted).

Solution:1Remove all newly installed hardware.

2.Run all system diagnostic software provided by the computer manufacturer. Especially memory checks.

3.Check that all new hardware or software is installed correctly, and if this is a clean installation, contact the hardware or software manufacturer for any Windows updates or drivers that you may need.

4.Disable or uninstall all anti-virus programs.

5.Disable BIOS memory options such as cache or shadow