iPhone6 always enters headphone mode What to do

It may be caused by a short circuit caused by moisture in the headphone jack of your mobile phone, or due to a foreign object that causes poor contact between the contacts in the headphone jack, which can be cleaned with a cotton swab or paper towel; If the problem still cannot be solved, it is recommended to check and repair at an after-sales service point. Here's a closer look:

1. In general, this is caused by the dampness of the mobile phone or the water entering the headphone jack, try to throw out the water in the earpiece, and then gently screw in the water with a cotton swab, and then use the hair dryer to turn on the hot air and slowly dry the remaining moisture, and restart the mobile phone;

2. It may also be due to poor contact in the headphone jack of the mobile phone, or it may be caused by foreign objects inside, use a cotton swab or paper towel to clean it up;

3. If it still can't be solved after cleaning, it may be caused by the failure of the headphone jack, and it is recommended to take the mobile phone to the after-sales maintenance point for inspection and repair.

First of all, it seems that if there is no sound in electricity, it is to enter the headphone mode.

The solutions are as follows.

1 Settings - General - Accessibility - Incoming Call Use in Physical Activity (Default).

2. Use the headphone access interface of the iphone, turn on the iPod to listen**, then press pause, press the home button to return, turn off the iphone (without using other third-party software), pull out the earphones, and then turn on the phone, it can be solved, if you don't succeed in trying a few more times, it still doesn't work, long press power home for a hard restart, and then when the white apple appears, pull out the earphones.

3We can simulate the action of listening to **, but this time when unplugging the headphones, don't be too fast, and gently rotate and unplug them. Sometimes unplug it too quickly, and the phone's program doesn't respond. So keep the headphone mode all the time.

4. In the shutdown state, we unplug the earphones, find a needle, and gently poke the earphone hole twice, it may be that when the earphones are unplugged, the bouncing device inside does not return to its original position, we wrap the toilet paper with the needle after poking, wipe the inner wall of the earphone hole, and wipe off the dust covering it.

5 If the above methods are not possible, we can try to restore the factory settings, but this step, you have to back up the data on your phone.

6. It's not okay, it's a hardware problem and send it for repair.

iPhone inexplicably entered headphone mode how to cancel. Many Apple mobile phone users said that the Apple phone keeps showing the headphone mode without plugging in the headphones, so what should I do if the Apple phone keeps showing the headphone mode? Here is a tutorial on how to adjust the headphone mode back to the Apple mobile phone, let's learn together!

The common workaround for iphone6 is always headphone mode is as follows:

1. Use the earphones to plug and unplug them multiple times, and rotate them at multiple angles at the same time to see if the earphone mode is eliminated.

2. Replace other standard headphones to see if you can eliminate the headphone mode of your phone.

3. Turn off the phone and restart it to see if the headphone mode can be canceled.

4. If none of the above works, you can only back up the data and then restore the factory settings to see if you cancel the headphone mode.

Fifth, the factory recovery can not be restored, the software problem can be basically ruled out, only to send the repair to the customer service center for processing.

What's going on with the Apple 6S all the time in headphone modeLet's find out.

This situation should be caused by the failure of the micro switch in the headphone jack, moisture and filial piety, water ingress, etc., so only the headphones and speakers have sound.

You can try restarting your phone or plugging and unplugging the earphones several times in quick succession until the headphone mode is released.

Or use a cotton swab dipped in alcohol to swirl to wipe the headphone plug and mobile phone jack (the plug or jack may oxidize).

You can also use the headphone access interface to clear the dry hole, turn on the iPod to listen**, then press pause, press the home button to return, turn off the iPhone (without using other third-party software) to pull out the headphones, and then turn on.

If it doesn't work after trying several times, press and hold Power Home for a hard restart, and then when white apples appear, pull out the earphones to release the headphone mode.

The metal disc movement or the horn is muted.

The reasons and how to deal with them are as follows:

1. Check whether the metal piece in the headphone jack is out of place, and dial it back with a ballpoint pen refill.

3. Go to the phone settings - mode change - change the earphone mode to the external sound mode.

4. Use a toothpick to get through the speaker speaker hole, if it still doesn't work, restart the phone or restore the factory settings.

5. If it doesn't work, you can only send it for repair to prove that the speaker has been damaged.

See if there is a foreign object in the headphone jack, generally it will be like this when something is detected in the headphone jack of the mobile phone, or you plug and unplug the headphones a few times to see if it will be good, and then restart it to try.

Hope it helps!

iphone6 plus phone keeps bai in headphone mode for the following reasons:

duzhi1, setting problems.

2. Ear dao machine hole into the plate water.

Solution: Method 1: Change the settings.

Method 2: Turn the hair dryer to a cold state and blow it towards the headphone jack.

Method 3: Plug in the earphones, turn them down, gently unplug them again, and repeat the operation several times.

Method 4: Roll a paper towel into a small strip, insert the earphone jack, and wipe off the accumulated debris in the earphones.

The phone keeps showing headphone mode, and the possible reasons are:

1) Foreign objects enter the headphone jack. This situation is very much back.

It is mostly related to the user's sloppy answer, the solution is very simple, find a relatively fine thing, clean the headphone jack, and clean up the dirty things inside.

2) The mobile phone has been flooded and caused a short circuit. In this case, you can go to a repair shop and have it repaired by a professional.

3) The tail plug is damaged. See if it's because the copper pieces of the headphone jack are stacked on top of each other, and if so, you can solve it by picking it open directly with a needle. This is the case.

4) See if the tail plug of the mobile phone is moldy and rusty. Many mobile phones may be moldy and rusty due to the humid environment of use, coupled with foreign objects inside, in this case, just brush it with a brush.

5) The motherboard protection tube is damaged, which is a serious hardware problem and should be repaired by a professional.

6) Software issues. You can try plugging and unplugging the headphones to see if they are still in headphone mode, and if so, you can go to the profile mode settings. If the above steps don't work and you can't set it up, then restore it to factory settings. Generally, if there is a problem with the software, restoring the factory settings can mostly solve it.

(1) It is recommended to try to quickly plug in the earphones several times or restart the phone to see if the headphone mode can disappear.

2) If it still doesn't work, take it to the after-sales outlet of the mobile phone to test it, repair or replace it with a new headphone jack.

3) It should be caused by the failure of the micro switch of the headphone jack, that is, the earphone has been unplugged, but the switch has not been disconnected in time.

4) The headphone mode is automatically switched, the earphone mark will be displayed when the earphone is inserted, and the earphone mark will disappear automatically when the earphone is pulled out.

Can't you change it? I really can't restart it.