Ultraman Sero and Ultraman Tiga, which are amazing

The data can be analyzed:

Tiga. Compound: Flight speed: Mach 5, Running speed: Mach, Speed in water: Mach, Submersible speed: Mach, Jumping force: 800 meters, Grip strength: 50,000 tons.

Air: Flight speed: Mach 7, Running speed: Mach 2, Speed in water: Mach 1, Submersible speed: Mach 1, Jumping force: 1000 meters, Grip strength: 30,000 tons.

Powerful: Flight speed: Mach 3, Running speed: Mach 1, Speed in water: Mach 1, Submersible speed: Mach 1, Jumping power: 500 meters, Grip strength: 70,000 tons.

In general, the flight speed of Tiga is Mach 3-7, the running speed is Mach 1-2, the speed in the water: Mach, the jumping force is 500-1000 meters, and the grip strength is 3-70,000 tons.

Sero. Maximum flight speed: Mach 7, maximum jump height of 1,000 meters, maximum grip strength of 70,000 tons.

The maximum capabilities of the two should be comparable in terms of data.

Ultraman Tiga may not be able to beat Ultraman Sero, the first movie didn't hear Mebius say that although he is very young, he has unlimited potential warriors, ordinary Tiga fights with Super Ultraman Sero, Sero wins, you don't see Ultraman Tiga, how can he fight to the end It's all humans who help him, and Ultraman Sero fights to the end without human help at all, Flash Tiga PK Brilliant Sero Without human Tiga, it can't become a flash, and it's just a human thing written by people, and it's a thought.

Ultraman Tiga PK Ultraman Sero.

Tiga Purple Form PK Sero Blue Form Red Form PK Red Sero Form.

Flash Tiga PK Radiant Sero.

The light race is stronger than the research competition, the research competition is similar to SanDisk, the SanDisk competition is strong, and the Sero definitely beats Tiga in minutes.

Ultraman Tiga is the strongest, and Luo is much stronger in the game.

Of course, Sero is stronger, much stronger than Tiga.

Ultraman Tiga.

Which one is better or Ultraman Tairo?

Answer: Taylor was known as the Ultra Brothers back then.

The strongest in the world, the gold bracelet it is equipped with is also extremely strong. However, Tiga can concentrate the light in people's hearts, and finally it becomes the shining Tiga, which is one level higher than Taylor's meaning from here.

One is the strongest warrior in the Ultra brothers in the Showa era - Tairo, and the other is the first Ultraman - Tiga in the Heisei era who can change his form, but in terms of seniority. Tiga is a junior of Taylor. Perhaps Taylor is better in terms of combat experience and skill.

Discharge cooling is another type of convection cooling. Unlike regenerative cooling, the coolant used for exhaust cooling absorbs heat to the thrust chamber and is discharged out of the combustion chamber instead of entering the combustion chamber to participate in combustion. Direct drain coolant reduces the thrust chamber specific impulse, so the coolant flow for drain cooling needs to be minimized while only using drain cooling at the outlet section of the nozzle that is relatively less heated.

There is also radiative cooling, in which the heat flow is transferred from the combustion products to the thrust chamber, and then the heat is radiated by the thrust chamber wall to the surrounding space. Radiative cooling is characterized by simplicity and small structural mass. It is mainly used in the extension section of large nozzles and the thrust chamber of small thrust engines using high-temperature resistant materials.

When cooling in the thrust chamber of the tissue, a relatively low temperature liquid or gas protective layer is established on the surface of the thrust chamber wall to reduce the heat flow to the thrust chamber wall, reduce the wall temperature, and achieve cooling. Internal cooling is mainly divided into three methods: internal cooling (shield cooling), membrane cooling and diaphoretic cooling of head tissues. After the internal cooling measures are adopted in the thrust chamber, the mixing ratio near the wall of the combustion chamber is different from the optimal mixing ratio in the central area (in most cases, the near-wall layer rich in fuel is used) due to the need to reduce the temperature of the protective layer, resulting in the uneven distribution of the mixing ratio along the cross-section of the combustion chamber, so that the combustion efficiency is reduced to a certain extent.

Membrane cooling is similar to shield cooling in that it cools the thrust chamber wall by establishing a uniform and stable coolant film or air film protective layer near the inner wall surface, except that the coolant used to establish the protective layer is not injected by the injector, but is supplied through a special cooling belt. The cooling band is generally arranged in a cross-section of the combustion chamber or the convergence section of the nozzle. There can be several cooling bands along the length of the combustion chamber.

In order to improve the stability of the membrane, the coolant often flows through the gaps or small holes in the cooling belts, and when sweating is used, the thrust chamber wall or part of the inner wall is made of porous material with a pore diameter of tens of microns. Porous materials are usually sintered with metal powders or pressed with metal mesh. In this case, the number of pores per unit area is increased by making the micropores in the material as evenly distributed as possible.

The liquid coolant penetrates into the inner wall, creating a protective film that reduces the density of the heat transferred to the wall. When the flow rate of liquid coolant used for sweat cooling is above a certain threshold, a liquid film is formed near the wall of the thrust chamber. When the coolant flow rate is below the critical flow, the inner wall temperature will be higher than the coolant boiling point at the current pressure, and some or all of the coolant will evaporate, forming an air film.

In addition to the above thermal protection, there are other thermal protection methods such as: ablation cooling, thermal insulation cooling, hot melt cooling and composite protection of chamber walls. 3. Thermal protection scheme of high enthalpy gas generator Based on the above methods and the actual situation, the thermal protection method of high enthalpy gas generator is obtained.

The combustion chamber of a high-enthalpy gas generator differs from that of a liquid rocket engine, eliminating the front thrust chamber part, making its structure simpler and more effective. Then, the thermal protection involved is the thermal protection part of the combustion chamber wall. As the fuel enters the combustion chamber, it quickly decomposes and releases large quantities.

Sero.

Sero is stronger than Tiga. After all, Sero is Saiwen's son, needless to say, Tsuburaya is more preferred, and he is a cameo character in movies or TV rescue scenes throughout the whole process, and if he doesn't shoot the TV version, I'm afraid he will never be weak.

Tiga is the first of the three heroes of Heisei and the first warrior of the Heisei era, Tiga's forms include a composite type with balanced strength and speed, a strong type that focuses on strength, an air type that is good at aerial combat, a dark type before getting the power of light, and the strongest form Shine type.

And Sero is the son of Severn, and he is also the youngest and most powerful warrior in the Land of Light, his form is the power inherited from Gauss and Dinah, the strong Corona type, the moon god miracle type, the shield of Baraji given by Noah, the dark type possessed by Belial, and the glorious type inspired by the soul cry of Pigumon and Sero's companions.

One is the light born in the darkness, and the other is the pride of the sky with thousands of favors, they represent different eras, I feel that maybe Sero will have more tricks, but Tiga can bring us more memories and miracles. What's the matter with who's strong, I like Tiga anyway.

I think Sero is a little bit better than Tiga.

As the first Ultraman of the Reiwa system, Taiga is an Ultraman who has been given the hope of the people, in the Land of Light.

There are very few outstanding new generation Ultraman in it, in fact, it stands to reason that Jack, the first generation should have a son, but he was not chosen to protect the country of light, and Severn and Ultraman Tairo.

The son has become the pride of the new generation of the Land of Light, but as the pride of the new generation, everyone will definitely be curious about Taiga and Ultraman Sero.

Who's stronger? , so let's take a look.

Ultraman Taiga.

It was only last Saturday that he officially met with everyone, and at first Taiga did look a little young and vigorous, facing Torrecchia, who couldn't win against so many seniors.

Taiga actually wanted to defeat Torrecchia with the strength of only three people, but he never expected that Taiga was still too simple, and he thought that the moment he won was quickly attacked by Torrecchia, so he was beaten into other spaces, and this performance just came out compared to Ultraman Sero, which is still very different, and it can't be compared at all, but fortunately, Taiga inherited the strong strength of his father Tairo, and defeated the monster with sensitive skills in the face of the monster that just came out, but the strength is not strong enough.

Ultraman Sero is a warrior that should not be underestimated, defeating a hundred monsters in a row in his first appearance, but this is not the most handsome moment, Sero's most handsome moment is in the face of Belial, who is powerless in the entire Land of Light.

Previously, he used his great power to drive Belial directly under the magma, and although Belial was resurrected after absorbing the magma energy, Sero also absorbed the Plasma Spark Tower.

Then he used a move of the ultimate ray to defeat Belial at once, this magnanimity is not comparable to Ultraman Taiga at all, and Sero has the ability to change form freely, without relying on external forces (except for the ultimate form and infinite form), on the whole, Sero is stronger than Ultraman Taiga.

And from the current point of view, Belial is not a little stronger than Torrecchia, and the estimated strength is about the same as Tairo, you must know that Belial is Ultraman who can turn the entire country of light upside down, and this alone is already stronger than Torrecchia, and Taiga's final opponent is Torrecchia, and Sero is Belial, so from Torrecchia and Belial, it can be concluded that Sero is far stronger than Ultraman Taiga.