What is a curing oven and what are the heating methods of the curing oven

1. Introduction to the curing oven.

Curing refers to the production process of heating, resin curing, and drying of parts in the electronics industry and various other industries to enhance the stress of material bonding. The curing vessel is the curing oven.

Second, the use of curing oven.

It is suitable for the production process of heating, resin curing and drying of parts in the electronics industry and various other industries.

3. Classification of curing ovens.

1. Resin curing oven.

It is a resin curing solution treatment.

If the workpiece is heated to a higher temperature and subjected to constant temperature treatment, it is called artificial curing, and if the workpiece is stored at room temperature or natural conditions for a long time, it is called natural curing treatment. The purpose of the curing process is to enhance the stress of the material bonding.

2. Metal curing oven.

It is a kind of metal solid melt treatment, which refers to the heat treatment process in which the performance, shape and size of the aluminum-gold workpiece are solved treatment, cold plastic deformation or casting, and after forging, placed at a higher temperature or constant temperature, its properties, shape and size change with time.

When it comes to aluminum alloys, it was found that the hardness of this alloy was not high after quenching, but after a period of time at room temperature, the hardness increased significantly, a phenomenon that came to be known as precipitation hardening. This discovery has aroused great interest in the engineering community. Subsequently, it was discovered that some could be aged.

Aluminum alloys and copper alloys that are strengthened.

and iron-based alloys, creating a new strengthening method that is essentially different from general steel quenching and strengthening - aging strengthening. Interesting. Subsequently, some aluminum alloys, copper alloys and iron-based alloys that can be strengthened by aging treatment have been discovered, creating a new strengthening method that is essentially different from the general steel quenching and strengthening - aging strengthening.

Hot air circulation heating and radiant heating.

1. Hot air circulation solidification: convection heating, uniform temperature field, the disadvantage is that the temperature rises slowly when heating heavy parts, and the energy consumption is large. Energy Natural gas, electricity, oil, coal, biomass pellets, etc. can be used.

2. Radiation heating curing: mainly radiant energy, directly irradiating the surface of the workpiece, fast heating, high efficiency, energy saving, taking powder curing as an example, infrared curing is faster than hot air curing 1 3-1 2, the disadvantage is that the shape of the complex parts is unevenly heated, and the energy is electricity or natural gas (the radiation heating characteristics of the two are also different).

It is recommended to adopt the curing method of radiation heating + hot air circulation constant temperature, which can not only save energy but also ensure the curing quality.

The curing oven is divided into ultraviolet curing or far-infrared heating, which cannot be called a boiler.

Model Name Rated Power (kW) Maximum Operating Temperature Working Area Size (mm) NJG101-5 Curing Oven 9 250 1000 800 1000 NJG101-6 Curing Oven 12 250 1200 1000 1200 NJG101-7 Curing Oven 15 250 1400 1200 1500 NJG101-8 Curing Oven 18 250 1500 1200 1800 NJG101-9 Curing Oven 24 250 1800 1500 2000 NJG101-10 Curing Oven 32 250 2000 1800 2000 NJG101-11 Curing Oven 45 250 2500 2000 2000 NJG101-12 Curing Oven 65 250 3500 2500 2000 Main technical parameters.

1.Temperature range: Room temperature 250 adjustable.

2.Temperature control accuracy: the error between the temperature of the internal point of the box and the set temperature is 3 3The temperature rise rate, fall rate, and holding time can be adjusted arbitrarily by the program input.

4.Temperature control can be set in segments: PID eight-stage program control, 5Power supply: AC3 380V 50Hz

6。Power: See KVA in the table above

7.Alarm conditions: temperature runaway, stirring and exhaust motor damage, heating power supply, exhaust power supply power outage (control power supply uninterrupted).