Why doesn t it show charging on the phone charging?

There are several possibilities, 1 is that the mobile phone is running out, and there is no response when it is just plugged in, and it will be fine after a while. 2.The phone is not in good contact, or it is not plugged in properly.

3.The charger or battery is broken. You can use someone else's charger or someone else's battery to test it...

I've been in this kind of thing before. You have to first determine the electrical outlet, then whether the charger is powered on, and then look at the phone. You say that there is no prompt light, you leave it for 10 minutes If the phone heats up, it means that the battery is charging.

But it won't show charging, which should be a problem with the phone. But it's enough to charge.

If your phone won't charge, try it

1.Replug or replace the cable with the charging head. (It is recommended to use the original version) 2For mobile phones with detachable batteries, you can turn off the battery and use a cotton swab to clean the battery contacts and the charging port of the mobile phone.

If the above methods do not solve the problem, please bring the purchase invoice, repair card and machine to the Samsung service center for inspection.

Shutdown on reboot is fine.

If it is a Samsung phone, it is recommended that you try it as follows:

1.Use the original charger to connect to the home power source for charging.

2.Replace the power outlet, try or change a data cable to connect to the charger for charging.

3.If the phone can be turned on normally, it is recommended to back up the data in the phone (such as contacts, multiple files, etc.) and restore the phone to factory settings.

If the problem persists according to the above methods, please bring the purchase invoice, warranty card and machine to the nearest service center for inspection.

Generally, it is the system failure of the mobile phone, which causes problems with the battery level display. This kind of problem is the easiest to solve, you can directly shut down and restart, which is equivalent to data refresh, and the general power display will return to normal. If it still doesn't work, you can only flash the phone.

The phone system is malfunctioning, so there is a problem with the battery level display. This kind of problem is the easiest to solve, you can directly shut down and restart, which is equivalent to data refresh, and the general power display will return to normal.

Precautions for mobile phone charging.

Try not to use the mobile phone when charging, to avoid the phone is too hot, if the battery is not used for a long time, to charge to 60%, store it separately in a cool and dry place, and replenish the charge every other month.

When the battery is charged for the first time, the charging time should not be less than 16 hours, but not more than 24 hours, try to use the original charger or the charger of a reputable brand, and follow the instructions, otherwise the battery will be damaged or even dangerous.

Try replacing a data cable.

2. Replace a power plug, if it doesn't work, then it's not a problem with the power plug.

3. If there is no problem with the above methods, consider whether the mobile phone itself is faulty, and it is recommended to find a professional to repair the mobile phone.

Precautions for mobile phone charging.

1. Try not to use your phone when charging to avoid it being too hot.

2. If the battery is not used for a long time, it should be charged to 60%, stored separately in a cool and dry place, and replenished every other month.

3. When the battery is charged for the first time, the charging time should not be less than 16 hours, but not more than 24 hours.

4. Try to use the original charger or the charger of a reputable brand, and follow the instructions, otherwise it will damage the battery and even cause danger.

5. Please remove the charger in time after the battery is fully charged to avoid charging for a long time, otherwise it may damage the battery or shorten the life of the charger.

1.Because the system is stuck, there is a problem with the battery level display, so the phone is turned off and restarted, and it returns to normal.

2.If there is a problem with the mobile phone charging card slot, you need to go to the mobile phone store to replace the charging tail slot, or you can replace it yourself.

Questions. But it's restarted, and it hasn't gotten better, what should I do?

Then how to replace the charging tail.

1.Troubleshoot system issues, restore your phone to factory settings, and remember to back up your data.

2.The battery replacement tail needs to be purchased online, and then disassembled and replaced.

Possible reasons are:

1。Yes, the phone battery is completely out of power, and there will be a display when the battery is charged after a while.

2.The phone is in poor contact, unplug it again and try it, or the power is not on.

3.The charger or data cable is broken. You can use other chargers to test it.

4.Maybe the charging port of the mobile phone is broken, and you can get it to the repair place and replace it with a new one.

If the phone is charging, it does not show that it is charging, which proves that it is not charging, and you can follow the steps below to find the problem.

First of all, make sure that the power supply is charged, then consider the mobile phone charger head or data cable damage caused by not charging, then consider how long the mobile phone has been used, whether it is caused by aging, and finally consider the mobile phone system problem.

Solution, the data cable and charger can be replaced, find the same data cable and charger to charge the mobile phone to see if there is a display, and then consider that if the mobile phone is used for too long, it can only be replaced, and finally the mobile phone can back up useful data, and the factory reset function is used to solve the problem.

Hello, when your phone is charging, the screen shows that it is not charging because of two reasons: first, your phone charging cable is not plugged in tightly, you can plug it in again, and second, the charger or charging cable you use is not original, then you must use the original one, especially the Apple mobile phone has high requirements for the charging cable, and the mobile phone does not display the lightning symbol when charging because it has not entered the charging state, you can try to deal with it with the following methods:

1. Clean the charging jack at the bottom of the mobile phone, you can use a wooden toothpick or a small brush to clean it;

2. Replace with a usable power adapter;

3. Replace an available charging cable (data cable).

There is a problem with the connector of the charger, or there is a problem with the connector of the mobile phone, and the contact is poor.

The reason why the mobile phone battery cannot be charged is:

1. Check whether the charger is normal.

Usually when encountering a mobile phone that cannot be charged, the first thing to consider is whether the charger is normal, whether the charging cable is damaged, whether the charging head is faulty, and whether the contact is poor. If your own charger is damaged, try using a different charger to check if it can be charged.

2. Check whether there is a problem with the data cable, and the user replaces the new data cable to test whether it is charged normally 3. Check whether the charging hole of the mobile phone is damaged.

To rule out whether the charger is normal, then consider whether the charging hole is damaged. Check whether there are any foreign objects blocked in the charging hole and whether the metal contacts are damaged.

4. Consider whether the mobile phone battery is damaged.

Exclude both of the above cases. That's a problem with the phone's battery. If it is really a battery problem, then it is possible that the phone is over-discharged, causing the battery to sleep. It is recommended to take it to a mobile phone repair shop for repair.

There are several reasons why your phone doesn't show up while charging:

1.The phone screen is locked or turned off: You need to press the power button or unlock the screen to see the charging status.

2.There is a problem with the charger or charging cable: The phone is not properly connected or provided with enough power.

3.The phone's battery is fully charged: there is no need to show the charging status anymore.

4.The phone has a software glitch or hardware damage: Causing the charging status to not be displayed correctly.

5.Poor contact of the charging cable: First of all, Sakuraki can check whether the charging cable is in poor contact, and whether there is dirt or dust blocking the contact.

6.Charger failure: If there is no problem with the charging cable, then it may be that the charger is faulty, you can try to change the charger and try again.

7.Mobile phone charging port failure: If replacing the charger still can't solve the problem, then it may be that the phone's charging port is faulty, and you can go to a professional repair shop to check and repair it.

8.Overheat Protection Mode: Some phones will set an overheat protection mode, and the Spine Buhong will stop charging and turn off the display screen when the temperature is too high to avoid battery damage and safety issues. At this time, you can wait for the phone to cool down before charging.

In short, no matter what the situation is, it is necessary to carefully investigate the cause of the failure and deal with it in a timely manner to avoid bigger problems.

Mobile phone charging, if there is no display guess burning, it means that there may be a problem with your charger or data cable, it is recommended to replace the data cable and charger, test it again, if you are sure that the charger and data cable are no problem, then the ear is a problem with the mobile phone, you can test it when the time comes.

There could be the following reasons:

1.The phone screen is locked or turned off, and you need to press the power button or unlock the screen to see the charging status.

2.There is a problem with the charger or charging cable that does not connect the phone properly or provide enough power to sell a loss.

3.The phone battery is fully charged, and the spare stool no longer needs to display the charging status.

4.The phone has a software glitch or hardware damage: Causing the charging status to not be displayed correctly.

、About the aboveWhen the phone is charging, it is not displayed in Tongjian charging, in fact, it has been charged, what is going on? To solve this problem, first check whether the original charger is normal.

Check whether there is any poor contact inside the original charging data cable.

Check the charging cable plugwithMobile phone charging tail plug, look at the inside between the two, whether there is poor contact, etc.

Check if the battery inside your phone is normal.

After the four points of the Shang's staring, if it is normal, then thisWhen the phone is charging, it does not show up in the charging problem

1. Check the data cable of the charger and the excitation ruler.

Use the standard charger and data cable for charging, the non-standard charger and data cable may not be compatible with the mobile phone, resulting in failure to charge, it is recommended that you replace the standard charger data cable for comparison test. If there is a fault with the standard charger and data cable, you can go to the vivo customer service center for testing.

2. Check the charging port of your phone.

Check the mobile phone charging port for foreign objects, corrosion, dirt, liquids, etc., if there is such a phenomenon, please go to the vivo customer service center for testing.

3. The mobile phone has not been used for a long time or is over-discharged.

If the phone is not used for a long time or the battery is automatically turned off, the electric Chang high pool is in an over-discharged state, it is recommended to charge it for 30 minutes before checking.

4. If the phone is charged to 80% and stops charging, check the phone function settings.

Some models are supported"Optimize battery charging"function, if this function is turned on, in order to prolong the battery life, it will intelligently learn the historical charging habits of the mobile phone, and intelligently adjust the battery full time when the mobile phone is charged for a long time.

Note: Go to Settings - Battery - Charging Lead Plum Settings - Optimize Battery Charging - Turn on Off Function, if you can't see this menu, it means that the machine does not support this function.

5. Service center testing.

If the above methods fail to solve the problem, it is recommended to back up the mobile phone data in advance, and bring the mobile phone, charger set and proof of purchase of the shock ruler machine to the vivo customer service center for testing. Enter the lead Li into the mobile phone vivo official website app--service--my service--service outlets can query the nearest customer service center outlet address and **.