Why can t the recorder be burned intermittently?

The VCR stage cannot be burned. This is because the signal resources that are transmitted cannot be obtained at this time. So it makes it impossible to burn.

The reason why the good friend video recorder can't be burned intermittently is that the memory of the video recorder is not enough, or the reason why he can't burn due to a problem, I hope it can help you.

If the VCR is interrupted, he can't burn directly under normal circumstances, or does he need to restart it before burning?

In this case, I suggest that you can replace the recorder, and the effect should be completely achieved.

If it can't be burned after a break, it should be that its slot has been engraved.

Video recorders have long been obsolete.

Now it's all cameras, and if it doesn't burn intermittently, it's probably a problem with the disk itself.

Or you can't sense that the components inside are loose.

The recorder cannot record due to interruptions.

This should be your lack of storage space.

You can clean up the storage space and try to record again.

Responsible for the recording head, it may be dirty and needs to be cleaned.

I'm glad to answer this question for you, the reason you can't burn is because you're running out of memory, or the disc has something in it.

The reason why the VCR stage is not burned,It should be that network or which one has some problems when the network is disconnected.。

A: Generally, the bald head is broken, so buy a new one.

This can be considered as a matter of debugging the scale machine.

The reason why this can't be burned may be the problem of the machine, just look at the machine!

If the video recorder is interrupted, the image cannot be connected when burning.

Proof that there is a problem with your recorder's tape and needs to be repaired.

The reason why they can't burn each other is that there is something wrong with the video recorder.

The VCR can't be burned intermittently, is that some genetic fault? It's really okay to check and repair.

There are many reasons why a video recorder can't burn intermittently.

There was an error in the burning software and it could not be burned. You can remove, reinstall, or install a new version of the burning software, or replace it with another burning software.

Problems burning discs. The burning disc may have been scratched or unqualified, or the burning disc does not match, for example, the CD burner can only burn the CD and cannot recognize ***.

A problem with the burner itself. There is no damage to the internal write head of the recorder, and data cannot be written. Repair and replacement.

There are several reasons for this:

1. The quality of your burning disc.

2. There is an error in the setting of the recorder.

3. The burned file is missing or there is an error.

4. The recorder has a bald head or hardware failure.

re: Basically, there is no setting, it's just a matter of speed regulation, the file is exceeded, and the software can also compress it. I don't know if you use it.

Neroburning this software, this one is very good. I guess the quality of the dish is too inferior.,Try it for a different **,Buy a ***-rw disc and try it.,If it doesn't work, it's empty.。 Besides, turn down the speed and see?

If it doesn't work, it is recommended that you go directly to change the machine, anyway, you have only bought it for a month. The quality of the recorder is not up to par!

1 If all of these situations occur, it is possible that:

1. The video recording setting is wrong.

General monitoring settings.

It is recommended to use "Normal Recording".

Instead of setting up Mobile Recording

Some users want to record for a longer period of time.

Use mobile recording.

This will lead to an interval situation.

This does not occur after the change.

2. When this situation occurs, it happens to monitor the host reboot.

Problems with restarts.

It is possible that the monitoring host has a power failure.

It's also possible that the monitoring is set to rest.

Or the monitoring is restarted when it is remotely controlled.

3. If it's just a single monitor.

It is possible that the monitoring is faulty.

For example, a power failure.

or line failure.

4. The "time period" video is set in the surveillance.

Sometimes the settings are wrong.

This may occur.

In "Normal Recording".

Just select all the times.

Motion detection footage comes and someone is active before returning to the video, or the connection is often dropped.

I've had this problem too, but I've been fine after trying the fifth one, because the recorder picks the plate more strictly. No matter what brand of recorder, there is a situation of picking, generally you use what brand of disk is less likely to have problems, don't always change.

In addition, there are some problems that can occur, such as:

1. The light head of the recorder is faulty and cannot be written to the disc normally;

2. When burning, I chose virtual burning, of course, the content has not been written to the CD, but it is on the computer hard disk, so of course the CD has nothing, but the CD should still be usable, which does not match your symptoms;

3. You can look at the data surface of the disc to see if there is a different area, the circle near the center of the circle is the data, if there is no data on the disc, the probability of the recorder picking the disc is relatively large;

4. It is possible that the burning software or system files are lost and the burning is unsuccessful, but there will generally be error information, so the probability is relatively small.

That's all there is to it, if you look closely, if the bald head is broken, you can generally only change the new recorder with Shanhu key, if it is a pick-up disk, you only need to use the commonly used disk.

Yours is OK with a burner???