How much is the price of Tengda W303R router urgent .

Maximum transmission rate: 300mbps

Network standard: Wireless standard: IEEE 802

Network interface: 1 x 10 100Mbps WAN antennasNumber of antennas: 3 x external antennas.

WDS function: supports WDS wireless network expansion.

WPS function: supports WPS one-click encryption function.

QoS Support: Yes.

Wireless security: WPA-PSK and WPA2-

Firewall function: Built-in firewall.

Power supply: 8W

Antenna type: External antenna.

Antenna gain: 5dbi

Status LEDs: Power, System, WAN, W

Product certification: FCC, CE, 3C, RoHS

Environmental standard: operating temperature: 0-40

Other features: wireless AP, router, 4

Average score: out of a perfect score.

Advantages: Good penetration! The signal is stable!

It's very bluffing to be outside. In particular, there are 3 antennas, and the laptop signal is four or five bars separated by two walls, and the mobile phone is stable in four bars. I bought TP's TD-W89841N before, and the three-antenna Tengda is better than the two-antenna is obvious!

The most important thing is that TP broke down in less than half a year after I bought it... Also often dropped. Maybe I'm unlucky, anyway, I'll recognize Tengda in the future.

Disadvantages: Occasional crash phenomenon in long-term work, and the restart phenomenon disappears. The first day of use, I didn't find it for the time being, if you want to say that there is no power switch, it's a bit big, and it looks old.

But no one looked at it in the corner. By the way, its power adapter has a power ring after it is connected, which is unpleasant to listen to.

Zhongguancun [cited 2013-08-21].

It's around 99-110.

The brick-and-mortar store is definitely a little more expensive!

The 180 physical store is a little expensive and 160 is suitable, after all, the machine does not need to be so troublesome!

Main Router Settings

1. Enter the settings interface of the main router, then click [Running Status] in the left option bar, and you can find the DNS server in the WAN port status bar, there are two in total, the primary DNS and the alternative DNS server, record them.

2. Click [Network Parameters] - LAN Port Settings] to set the LAN address of the router to save, at this time, it will be restarted and then return to the settings interface and click [Wireless Settings] - Basic Settings.

3. Set the SSID to TP Link A. Set the wireless channel to: 11. Note: The WDS or Bridge feature must be turned off.

4. Click [Wireless Settings] - Wireless Security Settings, and select WPA-PSK as the encryption method, in this example, 12345678 as an example. Note: WPA WPA2 encryption is more secure and more stable to bridge than the old WE encryption, so WPA WPA2 encryption is recommended.

5. Click [DHCP Server] -- DHC Server Settings] and set [Address Pool Start Address] to; Set the End Address of the Address Pool to Click Save to restart the main router. The main router is set up.

Set up the secondary router].

1. Enter the settings interface of the secondary router.

2. Click [Network Parameters] --LAN Port Settings.

3. Set the LAN address of the secondary router to prevent conflicts with the main router, and it is also convenient to manage the main and secondary routers.

4. Click [Wireless Settings] - Basic Settings.

5. Set the SSID to TP Link-B. Set the wireless channel to: 11.

6. Check [Turn on WDS], click Scan in the pop-up interface, find the SSID of the main router after getting the AP list, that is, TP Link A, click the [Connect] button on the right, select WPA-PSK as the encryption method, fill in the key of the main route: 12345678, (keep it consistent with the main router), and click Save.

7. Because the new WDS function is different from the old bridge and more advanced, you only need to turn on WDS on all secondary routers and fill in the information of the main router, if the main router turns on the WDS or bridge function, please turn it off, otherwise the WDS function cannot be used.

8. Click [Wireless Settings] -- Wireless Security Settings to set the password of the secondary route wireless.

9. Click [DHCP Server] -- DHCP Server Settings], change [Address Pool Start Address] to [Address Pool Start Address] to [Address Pool Start Address]. [Gateway] Fill in the IP address of the main router, that is. The primary and alternate DNS servers fill in the previously recorded addresses to save and reboot the router.

10. The setting is complete and the connection is successful.

I'm doing it too, but my two routes are different, and I didn't succeed in doing it for half an afternoon this afternoon.

Leave a footprint next time to see if anyone has succeeded.

Mine is Tengda w150d and tp-link td-w89841n (this one was struck by lightning last time the cat part was broken, but the routing part is still good).

1. First of all, make sure that your route has a bridging function.

2. Turn on the bridging function of the main router, if you can set it, enter the MAC of the LAN port of the bridging router (note that it is the LAN port, not the WAN port, this can generally be seen in the routing status.) ）

3. Set the LAN port of the bridge router to the same network segment as the main router, and then enable WDS to scan the main route, and then add it. Then disable DHCP and manually set the computer IP to the same network segment as the primary router.

4. End.

The routing website has detailed instructions.

Wireless routers are standard products, micro-power wireless products, and the distance that can be seen visually is no more than 100 meters. And the effect of penetrating the wall is very poor, especially reinforced concrete. In reality, generally in the suite, such as a three-bedroom living room, it is basically no problem, but the performance is basically very weak between the upper and lower floors.

If it is placed on the south balcony, the signal to the northernmost room is not good.

Is the terminal access a notebook? What is the indoor environment, is it an empty office area or an environment with various columns?

It is not a problem for indoor equipment to cover tens of meters, and it is okay to have one in the general office environment.

Tengda W303R wireless router setup method:

Home Network Environment Cabling]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

Computer enters the router]:

1. The computer IP and DNS settings are automatically obtained.

2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

Set Router Dialing]:

1. In the [Setup Wizard], select [PPPoE Dialing] (some are ADSL dialing), enter the username and password (provided by the network service provider) according to the prompts, and save.

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

Turn on the router's wireless function].

1. Select Wireless Settings --- Basic Settings.

2. Check [Turn on wireless function] and click Save.

Set wifi password].

1. Wireless Settings - Wireless Security Settings - Select [WPA-PSK WPA2-PSK].

Authentication Type: Automatic.

Encryption algorithm: AES.

The PSK password is the wireless password. Set the required password.

Here's how to set it up:

Set the WAN port to auto-fetch, and if it doesn't work, change the LAN to set WAN auto-fetch.

Just talking about the signal should be a good point for Tengda, although they are all 5dbi antennas, Tengda has one more after all.

TP-link's is a little more stable than Tengda's, after all, stability is the last word.

TP-Link TL-WR841N 300M Wireless Router TP-Link is an established manufacturer of routers. The connection rate is 300M.

TENDA W303R 300M Piercing Wall King Wireless Router.

The connection rate is also 300M (halved if two people share).

Both are in the same level, and from the credibility of the brand, I personally recommend TP-Link.

It's still tp good I tried.

1. Connect the computer to the router, open the browser and enter, go to the router settings interface, and enter the initial password account admin.

2. Select Setup Wizard, Next.

3. Select ADSL to dial, Next.

4. Enter the account password of the broadband and the next step.

5. Set wireless attributes, including name, password, encryption mode, etc.

6. After the settings are completed, select Restart.

If your router cannot connect to the network after setting, please log in to the router interface, click "Advanced Settings" - "System Status" to check the connection status of the WAN port connection, and check the following troubleshooting methods according to your WAN connection status:

The WAN port displays the solution to the failure of the connection.

The WAN port displays the troubleshooting method in the connection.

The WAN port shows that it is connected but cannot connect to the network.

Go to the router settings page, find "Advanced Settings" in the item, select "Use IP and DNS specified by ISP> and enable DHCP in the item

I laughed, you go in, first enter your router's account password, you enter your broadband account password in there, of course not.