-
It's been destroyed beyond recognition, first you have to clean up the remnants of the registry, so that you can fix the loading error prompt, open Optimizer or Super Bunny, use the registry cleanup feature to clean up your registry, then fix IE, let it restore its default settings, and then restart to see if the problem still exists? Because it is very likely that the virus of your machine has not been cleaned up, I suggest that you install another Kaba, upgrade it, and then enter the safe mode to scan the whole disk nod32, you can also go to this ** down.
-
Rising Antivirus only clears the poison, your files have been seriously damaged, and the poison can't be used, so you can only reinstall the system, install it and back it up again, and it is estimated that your original backup also has a problem.
-
There's a virus in your machine.,You deleted the poisoned system files by mistake.,It seems that you're going to reinstall the system.,Hehe.,If you don't go back to reinstall the system.,Then you find someone.,There's no way.。
Who told you not to come back?
Then you have to study hard in the future
-
There is no good way.
Reinstall the system, all the problems are solved, after installing the system, do ghost backup, if there is a problem in the future, you don't need to install the system, just take a few minutes to restore.
-
Just reinstall the system, and the useful files are backed up with a D drive. It's best to buy the original antivirus software, and the data package on the Internet still doesn't work!
-
It's better to reload! The machine was so badly damaged by the virus!
-
Let's reload the system.
It is recommended to back up the system with ghost after installation.
It's much easier to restore the system with ghost.
-
Reinstall the system. Best.
-
Don't bother, hurry up and reload -
-
Boot requires pressing F1 to enter the system troubleshooting.
Under normal circumstances, the requirement to press F1 to enter the system is caused by a minor problem with the system's BIOS settings that do not affect the system startup, so please check the hardware information settings in the BIOS for discrepancies with the actual situation.
The common faults in general are:
1. The battery on the motherboard is dead.
Solution: Replace the motherboard battery.
2. You have set up the floppy drive to start, but there is a problem with your floppy drive.
Solution: A. Press del to enter the BIOS at boot, boot up the boot sequence, and turn off the floppy drive to boot.
b. Turn off the detection function of the floppy drive when it is turned on
Start the computer and press the [DEL] button to enter the main BIOS settings interface.
Select the "Advanced BIOS Features" setting item and press the Enter key to enter;
Set "Boot Up Floppy Seek" to "disabled" to turn off boot software detection.
-
Open the case, look at the motherboard, look carefully, and you can find a small coin cell battery, buy a new one and put it on. It's not a big problem, just change the battery, the battery is responsible for the motherboard recording the time, the battery is dead, the time is not accurate, in short, just change the battery.
-
There's a problem with the C++ library.,Reinstall the software that reported the error.。 Or did you delete something by mistake? The most thorough thing is the reloading. Good luck.
-
If it doesn't work, let's redo the win system.
If you want to spend less, add a 512 memory, which can be significantly faster, but it is still slower when encountering large games or programs, if you want to spend more money soon, first see if your motherboard can block the integrated graphics card, if you can, go buy a graphics card, don't be too good, there is more waste of 64M video memory. If you can't, you'll have to change the motherboard, and you'll have to spend more. >>>More
Author: MW HDS - Probationary Period Level 1 Don't talk nonsense!! An installation disk is nothing more than ***5 (the Blu-ray can't be that big). >>>More
I sweat, don't talk nonsense about the one who doesn't know on the first floor. >>>More
2 Put the PS dish in the light area. Copy them all and load them with an emulator. >>>More
If you draw on 9600GT, some special effects may not work, so it's best to use ATI, such as 4870, which is good. Around 1999, if you want to make large-scale drawings, the dual-core CPU is still needed, after all, the output speed is fast, otherwise. Or render it and wait until you're gone >>>More