What are the processing techniques of cups 5

The glass cup is a cup made of glass, usually the raw material is borosilicate glass, which is fired at a high temperature of more than 600 degrees, which is a new type of environmentally friendly teacup, which is more and more favored by people.

As a detail of production and processing, for many manufacturers, especially those entrepreneurs who are ready to get involved in the manufacture of glass and other products, it is urgent to understand the knowledge points of "glass production process and production process description" is the premise of targeted protection.

Instructions for the glass making process.

It is understood that the glass making process mainly includes: 1. Pre-processing of raw materials. The block raw materials are crushed to dry the wet raw materials, and the iron-containing raw materials are treated with iron removal to ensure the quality of the glass; 2. Preparation of batch; 3. Melting.

The glass batch is heated at high temperature in the pool kiln or crucible kiln to form a uniform, bubble-free liquid glass that meets the molding requirements; 4. Molding. Processing liquid glass into products of the required shape, such as flat plates, various utensils, etc.; 5. Heat treatment. Through annealing, quenching and other processes, the stress, phase separation or crystallization inside the glass is eliminated or generated, and the structural state of the glass is changed.

Description of the glass making process.

The glass making process mainly covers the following: 1. Wire support; 2. Blowing the ball; 3. an outer skin opening; 4. The inner tank is open and backed; 5. an interface; 6. a back cover; 7. Affix trademarks; 8. Annealing. As long as the quality is ensured, the above eight production processes are standardized, one link after another.

Of course, many glasses that require special processing will also involve the integration of printing technology and customization process, such as the process of some patterns mainly screen printing and flower paper baking. Here we will explain it in a categorical manner. The key is also to connect customers with production enterprises in this regard, so that they can make high-quality and qualified products.

Each cup processing process is different, which one do you want to ask?

It is divided into two categories: mechanical and manual.

The process of making a cup is as follows:

First, the selection of materials

1. The materials used to make cups are generally ceramic, glass, hungry hole plastic, metal, etc. Different materials have different advantages and disadvantages, such as ceramic cups have a good texture but are fragile; The rotten rotten withered seeds in the glass are highly transparent, but fragile.

2. The plastic cup is light and easy to carry, but easy to scratch; Metal cups are durable and easy to clean, but they are sensitive to temperature changes. Therefore, before making a cup, it is necessary to choose the right material according to the purpose and characteristics of the cup.

2. Design

1. The design of the cup should consider the user's usage habits and aesthetic needs. First of all, it is necessary to determine the parameters such as the capacity, shape and caliber size of the cup, and make design drawings.

2. When designing, we should also pay attention to the ergonomic relationship between the cup mouth and the handle to ensure that it is convenient and comfortable to use. In addition, in the personalized customization market, the packaging and printing of cups are also factors that need to be considered to meet the individual needs of users.

3. Processing

1. After selecting the material and design scheme, the cup needs to be processed. The processing of ceramic cups requires the use of ceramic tire wheels, which are first forged into shape and size of the clay and then fired at high temperatures.

2. The processing of glass cups needs to be made by glass melting forming process and molding or blowing process. Plastic cups need to cool the heated plastic sheets and then carry out cutting, thermoforming, surface treatment and other processes.

3. The processing of metal cups needs to be completed by cutting, bending, punching, etc., and then bonding, bending and other processes.

Fourth, the molding chapter

1. The cup obtained after processing cannot be used immediately, and it also needs to be molded. After the firing of ceramic and glass cups is completed, they need to be polished, sanded, etc., to ensure that the surface is smooth and shiny, and can withstand temperature changes.

2. Plastic and metal cups need to be treated with appearance, such as painting, painting, electroplating, etc., to meet the aesthetic needs of users.

5. Follow-up treatment

1. The cups that have been molded by the closed pants also need to be subject to follow-up packaging and quality testing. In the packaging process, environmentally friendly materials need to be used, and the cups should be graded and packaged in strict accordance with product specifications.

2. In the quality inspection process, it is necessary to test the surface flatness, thermal stability and other parameters of the cup, and carry out quality control according to relevant national standards.

Here's how to make paper cup lanterns:Material tools: 2 disposable paper cups, double-sided tape, hand scissors, wool.

Steps. 1. Cut off the circle around the disposable paper cup with a knife.

2. Then divide the paper cup into strips around it and divide it evenly.

3. The next thing is to beautify the cup and give it a pointed shape.

4. This is the approximate shape of the finish.

5. Then cut off the bottom of another disposable cup prepared and glue a circle of double-sided tape on the bottom.

6. Paste the bottom part of the double-sided tape to the sharp corner direction of the above figure.

7. Then cut the area around the cup with the bottom cut off.

8. Glue a circle of disposable paper cups to the lantern with double-sided tape.

9. Press the finished lantern slightly from both ends to the middle to sort out the shape.

10. String the lanterns prepared in advance and it is ready.

The handmade method of making disposable cups is as follows:

First method:

1. Prepare tools Raw materials: disposable cups, paints, brushes, brushes, plush wire, woolen cloth, scissors, glue, buttons, toothpicks.

2. Use a brush to coat the outer wall of the disposable cup with red pigment.

3. After drying, use a black paintbrush to decorate it.

4. Use a toothpick to poke holes at both ends of the cup.

5. Thread a plush wire through these two small holes.

6. Fix the wire inside.

7. Cut the woolen cloth into a small rectangle with a simple cut.

8. Apply glue to the mouth of the cup.

9. Use scissors to trim the rectangular woolen cloth into simple lace, and then stick it around the mouth of the cup.

10. Then cut out the shape of the petals with white woolen cloth, glue a button in the middle to decorate, and finally glue it to the handle of the flower basket.

The second method:

1. Prepare disposable paper cups, colored handmade paper, bottle caps, glue sticks, scissors, etc.

2. Fold two pieces of blue handmade paper into a bow and stick them on the outer wall of the paper cup decorated with yellow handmade paper.

3. Cut 8 strips of paper 3 cm long and 1 cm wide on blue paper, and 2 strips of paper 5 cm long and 2 cm wide on off-white handmade paper, and make these strips of paper into paper rolls. cut out large "pincer" shaped pieces of paper of crabs on red handmade paper and paste them on off-white paper rolls; Cut out small "hook" shaped pieces of paper on the crab legs on off-white handmade paper and paste them on a sky-blue paper roll.

4. Stick the blue and black round pieces of paper on the bottle cap to make crab eyes. Glue the yellow paper roll to the cap.

5. Glue the crab's eyes and legs to the paper cup. Use a colored pen to draw the crab's mouth on the wall of the cup. A paper cup crab is ready.