What kind of graphics card can be inserted into the PCI E slot 16X .

Updated on number 2024-02-09
5 answers
  1. Anonymous users2024-02-05

    PCI-E stands for PCI Express is the latest bus and interface standard, its original name was "3gio", it was proposed by Intel, and it is clear that Intel means that it represents the next generation of IO interface standards. It was renamed "PCI-Express" after the PCI-SIG (PCI Special Interest Organization) certification was issued. This new standard will completely replace the existing PCI and AGP, and finally achieve the unification of bus standards.

    Its main advantage is its high data transfer rate, which can reach more than 10GB S at present, and there is considerable potential for development. PCI Express is also available in a variety of form factors, from PCI Express 1X to PCI Express 16X, to meet the needs of both low-speed and high-speed devices now and for some time to come. The main ones that can support PCI Express are Intel's i915 and i925 series chipsets.

    PCI-E interfaces vary according to bus bit width, including X1, X4, X8, and X16, while X2 mode will be used for internal interfaces instead of slot mode. The PCI-E specification is connected from 1 channel to 32 channels, which has strong scalability to meet the different data transmission bandwidth requirements of different system devices. In addition, shorter PCI-E cards can be inserted into longer PCI-E slots, and the PCI-E interface can be hot-swapped, which is also a big leap.

    The 250MB second transmission speed of PCI-E X1 can meet the data transmission bandwidth requirements of mainstream sound effect chips, network card chips and storage devices, but it is far from meeting the data transmission bandwidth requirements of graphics chips. Therefore, the PCI-E interface used to replace the AGP interface has a bit width of X16, which can provide 5 GB of bandwidth, and even if there is a loss in encoding, it can still provide about 4 GB of actual bandwidth, which is far more than the bandwidth of AGP 8X.

    Although the PCI-E specification allows for X1 (250MB seconds), X2, X4, X8, X12, X16 and X32 channel specifications, PCI-E X1 and PCI-E X16 have become the mainstream PCI-E specifications in their current form, and many chipset manufacturers have added support for PCI-E X1 to Southbridge chips and PCI-E X16 to Northbridge chips. In addition to providing extremely high data transmission bandwidth, PCI-E uses serial packets to transmit data, so the PCI-E interface can obtain more bandwidth per pin than the traditional IO standard, which can reduce the production cost and size of PCI-E equipment. In addition, PCI-E also supports advanced power management, supports hot swapping, supports synchronous data transmission, and optimizes bandwidth for priority data transmission.

  2. Anonymous users2024-02-04

    It's a PCI-E standard interface, and when you go to buy a graphics card, you tell your boss that you want a PCI-E interface. Half of the 9600GT is good, be careful not to distinguish between the 9600GT and the 9500GT.

  3. Anonymous users2024-02-03

    Many of today's graphics cards are PCI-E interfaces, and your configuration plus a 9600GT is almost the same.

  4. Anonymous users2024-02-02

    X0D X0A3, for example, the configuration of dual-core processor PCI-E can be used with low-end graphics cards, such as Jingying GTX650 or HD7750 graphics cards below you can. If the processor is i5 or 4 cores, you need to use a mid-to-high-end graphics card, such as GTX750 to GTX760. If the i7 or E3 is so good, then you can use a high-end graphics card like GTX770 or GTX970 at the highest, and the same can be said for the A card.

    X0D X0A In short, what graphics card is most suitable for PCI-E X16 slot, which mainly refers to what processor the motherboard is equipped with. That's the key.

  5. Anonymous users2024-02-01

    First, in appearance.

    1. PCIEX16 is very long, longer than the previous AGP slot.

    2. PCIEX1 is very short and can only be inserted into the front end of the gold finger of PCIEX1 graphics card.

    2. Functions. 1. PCIEX16 slot is specially designed for graphics cards.

    2. PCIEX1 can be used for PCIe sound card and PCIe network card.

    3. Provide support.

    1. PCI-Express X1, supported by Nanqiao.

    2. PCI-Express X16, supported by Northbridge.

Related questions
14 answers2024-02-09

It seems that 2 slots cannot achieve dual channels.

9 answers2024-02-09

As shown in the figure below: 1. The left side is the AGP slot used by the old-fashioned graphics card; >>>More

8 answers2024-02-09

1.Hang the horizontal bar: Grab the horizontal bar with both hands, push your toes down, and hang for 5 minutes. Do it 3 times a day and it works great! >>>More

15 answers2024-02-09

Vicente Jolin is from September 15 and I'm from September 11 hehe.

27 answers2024-02-09

Ma 3 Kong has a good-looking appearance, and the interior is not evaluated. The best of the three cars is the Ma 3, which also has the best handling. , I think it's free. >>>More