How do I check how many generations my PCI slots are? 20

As shown in the figure below: 1. The left side is the AGP slot used by the old-fashioned graphics card;

2. In the middle is the PCI-E 16 x generation graphics card slot;

3. The back is the PCI-E 16 x Gen 2 graphics card slot;

Differences: AGP and PCI cannot be used universally due to different slots; PCI-E Gen and Gen 2 have different rates.

Basically, 70% of the DDR generation memory on it cannot support PCI-E graphics cards, only AGP graphics cards can be installed, of course, excluded.

Some"Alien"Motherboards, some 865PE motherboards also have PCI-E slots, it is recommended that you take a look at your own chipset, model. It's best to open the case and take a look, generally there are more agp graphics cards, and pci-e is a little longer than pci, and.

And it is generally distinguished from the white PCI generation, and there are two bayonets in the AGP slot, which is clear if you take a closer look.

Look at the model of the motherboard is the most important. There are two mainstream graphics cards, both of which are agp slots in the early days, and both of them are later.

PCI-E. I don't know when you bought your machine, and when there was a memory in the middle of the transition, it was within the DDR generation.

Saved, but it's a PCI-E graphics card slot, so you have to know when your machine was equipped with it, it may have been 06 years ago.

AGP.

Use the software Everest directly to view the hardware information, whether it is an AGP slot or a PCI-E, you can find it. Surely not PCI-E (the so-called second generation).

It may be PCI-E or AGP. Just look at the manual. I guess it's agp's.

Are there different generations of graphics cards??? The graphics card only depends on whether your motherboard is compatible or not?? Graphics cards are not generational.

There are two ways to view it:

1) The first way is to directly look at the early marking of the printing finger on the motherboard, which is suitable for the viewing method used by the motherboard of parts that have not been assembled and formed. In the first image below, the red circle on the left is "pciex16", and the second picture is "pciex8" in the same position. A more advanced way to identify is to look at the contacts, the first picture has contacts on both sides of the entire PCIE groove tooth (the small metallic yellow protrusion is the contact), this is "X16", the second picture only half of the slot has contacts on both sides, and the remaining half is empty, this is "X8".

In addition, it is important to pay attention to the version of PCIe (etc., which also determines the transmission bandwidth of the PCIe slot).

<>2) The second method is suitable for the motherboard of the assembled computer, and it can be easily viewed with the soft wheel teasing piece "aida64".

Open AIDA64, click "Display Device" "Graphics Processor" "Bus Type" in turn, here you can see that the PCIe slot is X several laps:

Directly disassemble the computer host, look at the motherboard, you can directly see whether there is a PCI slot;

Look at the motherboard parameters, there will be a detailed description of the parameters, whether there are PCI slots, how many slots there are, and so on.

The PCI card slot stands for Peripheral Component Interconnect.

It is a kind of interface, and then on the motherboard, a board is white, which is used to expand the function of the computer, generally there will be 3 to 4 PCI slots on the motherboard, and the landlord only needs to buy a PCI interface wireless network card.

1. First of all, double-click the desktop icon to start Master Lu.

2. After opening the main interface of the software, click "Hardware Detection" on the top navigation bar.

3. Make a note of the model of the motherboard in the result page (such as the Shenyan B360 chipset here).

<>5. At this time, we can see how many PCIe it supports, and complete the renderings of You Qingyin.