The water temperature of the original BYD F3 is not a little higher

Calculation Evaluation Method:

1. The current market value price = the naked price of the new car at that time (1-15%) 1-15%) That is, it decreases by about 15% every year, and it is multiplied by how many (1-15%) in a few years.

2. See how long the insurance is left, how long the car review is left, and the insurance and car review fees must be added in proportion to the time.

3. If the procedures are complete, the car purchase invoice, the key is complete (generally 2), the manual, the tool box, the fire extinguisher, the emergency tool, the tripod, etc., and the maintenance has been in the 4S shop, the price can be appropriately raised, depending on the individual.

4. See if there has been a major accident, otherwise it will be discounted by 30%-50%+ on the current market value price.

5. Look at the actual car condition, including engine, chassis, gearbox, shock-absorbing suspension, body paint and sheet metal, various electrical appliances, lights (including headlights, fog lights, width indicators, brake lights, cabin lighting, cabin atmosphere lights, etc.), interior, tires, brakes, various engine oils (engine oil, transmission oil, brake fluid, etc.), car batteries, etc. If all are normal, the first article shall be executed, otherwise, each item will be discounted separately.

6. Test drive, intuitive feeling, the best city roads and high-speed running, to see whether the gear shift is smooth, whether the brakes are normal, whether the direction is off, whether there is abnormal noise, whether the central control is intact, whether the glass is intact, whether the glass lifting is smooth, how low-speed performance and high-speed performance are, etc. If all are normal, they will be assessed according to Article 1, otherwise, each item will be discounted separately.

Yes, if it is much higher, just remove the thermostat.

Dear, this question is up to me, it takes a little time to type, please be patient, thank you!

Hello, high water temperature: 1Check whether the temperature of the upper and lower water pipes is the same, check whether the fan is rotating, check whether the antifreeze is enough, check whether there is any water leakage, and check the sealing of the water tank cover.

Check that the thermostat is not stuck. Check whether the impeller of the water pump is off and the cylinder gasket is broken. 2. Maintenance cost, thermostat 150, antifreeze 120, fan 350, water tank cover 60, water pump 260, cylinder head head 1000

Check first to see if there is a lack of antifreeze, resulting in high engine water temperatures. The circulation of the coolant, whether the circulation is not smooth. Secondly, you can also check that water temperature sensors, water pumps, thermostats, cooling fans, etc., may cause high water temperatures.

Solution to the high water temperature of the car engine:

1.The water temperature of the engine is too high, it is likely to be due to the combustion chamber and the waterway, in this case, it will be drained from the drain pipe, or it may be the exhaust of white smoke, which will naturally cause the water tank to be often short of water, and there is also a situation that the waterway is completely blocked, and it should be repaired in time.

2.Once our car has a waterway and oil channel rush, there is a phenomenon that the oil is white with water, and there is a situation that the waterway and waterway are rushed, which will make the car's cylinder block heat dissipation poor, this situation will be more damaged at high speed, it is recommended to repair it as soon as possible.

3.If your car has a water pump failure, then soon the impeller of the car will slip, or it will be completely jammed, so that the belt will break, and another situation is that the impeller will be deformed. will cause the water temperature of the car's engine to be too high.

At this time, it is better to recomb the belt, or change the impeller.

1.Leakage of water in the cooling system or insufficient cooling water;

2.The indication of the water temperature gauge is inaccurate or malfunctioning;

3.There is too much scale in the cooling system, and the heat dissipation effect is poor;

4.The shield net of the local heater or the ventilation of the radiator core is blocked by debris, resulting in poor heat dissipation;

5.The belt of the water pump or fan is too loose or broken;

6.The water pump is damaged, the fan blades are reversed or deformed, and the wind ring is damaged;

7.The thermostat is damaged in the closed position of the main valve; 8.The engine has been running under over-collapse load for a long time and the oil supply time is too late.

Causes: There are many reasons for the increase in the temperature of the water tank, such as the high-speed operation of the electronic fan, the long service life of the water tank, the lack of coolant, and the blockage of the water tank.

If a similar problem is found, in the case of unknown cause of the failure, it is best to turn off the car immediately, wait for the rescue of the 4S shop, and only start the vehicle again after the fault is cleared, and should drive at a slow speed as much as possible to prevent engine damage caused by excessive water temperature.

When the water temperature gauge rises and reaches the red line when the vehicle is in motion, or white water vapor suddenly emits from the engine cover, the water tank temperature is too high. Too high water temperature will cause the engine temperature to be too high and the heat dissipation will be poor, thereby accelerating the wear of the piston, resulting in uneven temperature changes, affecting power performance and increasing fuel consumption.

Summary. Hello, happy to answer your questions.

What's the deal with the high water temperature of BYD F3?

Hello, happy to answer your questions.

Hello. The water temperature of my car, what's going on with the old report.

Hello, the reasons for the high water temperature of BYD F3 are probably the following? First, first check if it is a coolant loss? If you lose money, you need to replenish the coolant in timeSecond, you need to check whether the electronic fan is operating normally?

If it doesn't turn, focus on checking the fuse relay, and third, check if there is a problem with the thermostat?

Changed the water temperature sensor yesterday.

What are the above points checked and excluded?

It's okay when you're old.

See. So if all of the above is a problem, is it 100% sure? , then check the pump and the engine, the head gasket, nothing else.

Okay, I'm here, let's take a look at the master. Okay,