BYD F3R can t play the car and has anything to do with the anti theft lock?

Updated on Car 2024-02-09
11 answers
  1. Anonymous users2024-02-05

    One: Is the steering wheel in a deadbolt state? The solution is simple, as long as you hit the steering wheel hard and twist the key at the same time, you can generally unlock the steering wheel lock quickly, and the ignition is an instantaneous thing.

    Two: Did you not return the gear to P when you parked? Think about it, if the D or R gear can be ignited, the jump of the vehicle at the moment of ignition is undoubtedly a huge safety hazard.

    Therefore, for automatic transmission vehicles (AT, CVT, AMT), the manufacturer will preset this mode, and repeatedly tell in the manual: make sure that the gear is in the P gear position when ignition.

    Three: one-button start sometimes encounters the trouble of power loss of the smart key, obviously the key is in the car, but the instrument always shows 'key matching error', this situation is likely to be the power loss of the smart key, and the start system can not sense the weak radio waves emitted by the key. Therefore, it is recommended to pick up the smart key and put it on the start button, and then press the button to start.

    Four: Check whether the battery has electricity. If the ignition is not ignited, it may be due to the loss of power or the expiration of the battery life due to the long-term headlights have not been turned off, and the battery is generally replaced in time according to the maintenance manual.

    Five: See if there's oil. If the fuel gauge shows that it is below the red line, it will not ignite. At the same time, pay attention to the quality of the oil. There have been car owners who found that there was water and mud in the fuel tank after disassembling the car, and with such oil, it is impossible for the car not to break.

    Six: No antifreeze added.

    Some car owners add water or inferior antifreeze to the car, resulting in a particularly cold winter, causing the entire waterway to be frozen, the engine to be frozen and cracked, resulting in the car water pump can not operate, can not catch fire, and injure other parts of the engine.

  2. Anonymous users2024-02-04

    Hello, it's locked, you can solve it if you turn on and off the key ten times in a row within 5s, I hope to help you, and praise [There is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

  3. Anonymous users2024-02-03

    Summary. Hello, dear, car master exclusive technician for you service, attentive, careful, concentrate on answering your car questions, for you to find the corresponding problem solutions and solutions, will provide you with a satisfactory answer! We hope you find this service helpful.

    If it helps you, we look forward to your likes and attention. Wishing you a blessed Year of the Tiger and good luck

    Dear, hello, BYD F 3 anti-theft lock, can't open the engine and doesn't respond, the relevant ways to remove are as follows.

    First, open the hood, remove the negative terminal of the battery cable, and wait 10 to 20 minutes before putting it back on.

    Second, the vehicle key is inserted into the ignition, so the instrument is energized 10 to 15 times, and then the vehicle engine is started directly in the energized state.

    Third, if the above two methods do not work, then this can only be started normally by re-using the computer to do anti-theft matching.

    BYD F3 anti-theft lock can't be opened, the engine doesn't respond, how to lift.

    Dear, this question is up to me, it takes a little time to type, please be patient, thank you!

    Hello, dear, car master exclusive technician for you service, attentive, careful, concentrate on answering your car questions, for you to find the corresponding problem solutions and solutions, will provide you with a satisfactory answer! We hope you find this service helpful. If it helps you, we look forward to your likes and attention.

    I wish you good luck in the Year of the Tiger, good luck and dear, hello, BYD F 3 anti-theft lock, can not open the engine does not respond, the relevant lifting methods are the following first, the vehicle open the engine cover, remove the negative pole of the battery line, wait for 10 to 20 minutes and then install the second, the vehicle key is inserted into the ignition, so then back to let the instrument power on 10 to 15 times, and then directly start the vehicle engine in the state of power on the third, if the above two methods are not possible, Then this can only be started normally if you use the computer again to do anti-theft matching.

  4. Anonymous users2024-02-02

    Summary. Hello, the original anti-theft method of the vehicle, BYD F3 first try the vehicle key insertion point, the fire lock is continuously switched on and off 10 to 15 times, and then start the vehicle directly to see if it works? If not, only the following tests can be done.

    First, in this case, first check the vehicle battery voltage, if the battery is seriously depleted, it will also lead to the vehicle anti-theft lock, then this situation is the need to charge the battery or take the power to start under normal circumstances, the service life of the battery is about 3 to 4 years, if the use period is exceeded, the battery appears to lose power, it is recommended to replace the new battery Second, the phenomenon caused by the loss of the vehicle remote control battery needs to be replaced with a new remote control battery, the choice of remote control battery, recommend the big brandThirdly, the vehicle anti-theft system is locked. In this case, the anti-theft system is generally faulty**, or the anti-theft system program is lost, then this situation needs to be decoded with a computer, clear the fault code, and then use the computer to re-do the anti-theft match before it can start normally!

    How to lift the BYD F3 original car anti-theft? The car anti-theft system is locked, and the car does not respond when it starts, how to unlock it.

    Hello, the original anti-theft method of the vehicle, BYD F3 first try the vehicle key insertion point, the fire lock is continuously switched on and off 10 to 15 times, and then start the vehicle directly to see if it works? If not, only the following tests can be done. First, in this case, first check the vehicle battery voltage, if the battery is seriously depleted, it will also lead to the vehicle anti-theft lock, then this situation is the need to charge the battery or take the power to start under normal circumstances, the service life of the battery is about 3 to 4 years, if the use period is exceeded, the battery appears to lose power, it is recommended to replace the new battery Second, the phenomenon caused by the loss of the vehicle remote control battery needs to be replaced with a new remote control battery, the choice of remote control battery, recommend the big brandThirdly, the vehicle anti-theft system is locked.

    In this case, the anti-theft system is generally faulty**, or the anti-theft system program is lost, then this situation needs to be decoded with a computer, clear the fault code, and then use the computer to re-do the anti-theft match before it can start normally!

  5. Anonymous users2024-02-01

    There are two ways to solve this problem:

    1. Turn off the power for 15 minutes, and then reconnect to see if it can be lifted.

    2. After the door is unlocked, insert the spare key within 15 seconds, screw it to the ON position, light up the dashboard (note: only light the instrument and do not start the engine), and then close the continuous 10 cycles for forced release. You can look at the key door marked on:

    off acc on star is to re-off-on, on-off counts as a cycle.

  6. Anonymous users2024-01-31

    Summary. Dear, hello, BYD F3 anti-theft lock can not be opened, the engine does not respond to the situation I will give you 3 emergency methods to lift the first open the engine cover of the vehicle, unplug the negative pole of the battery line, wait for 10-20 minutes and then install it, if you can't untie it, use the vehicle ignition, back and forth to power on the instrument 10 to 15 times, and then directly start the vehicle engine in the state of power on, try it, if you can't lift the anti-theft lock, you can only use the computer again to do anti-theft matching before you can start normally, You will need to go to a local professional car repair shop for maintenance.

    BYD F3 anti-theft lock can't be opened, the engine doesn't respond, how to lift.

    Dear, hello, BYD F3 anti-theft lock can not be opened, the engine does not scatter the reaction of the situation, I will give you 3 emergency methods to lift the first open the engine cover of the vehicle, pull out the negative pole of the battery line, wait for 10-20 minutes and then install it, if you can't untie it, use the vehicle ignition, back and forth to power on the instrument 10 to 15 times, and then directly start the vehicle engine in the state of power on, try it, if you can't lift the anti-theft lock, you can only use the computer to do anti-theft matching before you can start the call normally, This requires you to go to a local professional auto repair shop for maintenance.

    Dear, hello, your situation is that the engine anti-theft lock is not unlocked, you can try to open the door of the driving seat, step on the brake pedal and then press the key directly to start, if the dashboard can be lit, it proves that the engine fluid fiber of BYD F3 has been opened and the vertical spike has been opened, at this time, press and hold the door unlock button on the door of your driver's seat for 10 seconds to restore the vehicle anti-theft to normal.

  7. Anonymous users2024-01-30

    BYD F3 anti-theft lock, at this time the engine can not start, you need to unlock the engine electronic control system, the specific operation steps are as follows:

    1. Open the door of the cab of the BYD F3.

    Second, press the brake pedal of BYD F3.

    3. Press the one-button start button of BYD F3 to start the engine.

    Fourth, the dashboard lights up, proving that the engine of BYD F3 has been started.

    5. Press and hold the door unlock button of BYD F3 for 10 seconds to complete.

  8. Anonymous users2024-01-29

    Step on the brakes, open the key back and forth 12 times, and wait 5 seconds to take a taxi.

  9. Anonymous users2024-01-28

    Hello, if there is no remote control, the anti-theft lock, this situation can do the following operations, the first step is to open the ignition switch, insert the ignition key, the second step is to put the ignition key from the ON gear to the acc gear, and repeat the twist ten times in a row, the third part is to directly start the vehicle under normal circumstances, the anti-theft state, it should be lifted.

    Questions. Still can't solve it, repeat it a few more times, and check whether the vehicle battery is losing power?

    Questions. The electricity is normal.

    Did the vehicle keep calling the police?

    Questions. When I opened the door, I reported it, but now I don't report it, and the electricity is normal, but I can't unlock it.

    Hello. Now it's not convenient to shoot**, under normal circumstances, the operation method is the operation method just told to you, you can try a few more times, if there is still no response, this check whether the starter position has a starting power? If anything, it's a problem with the starter.

  10. Anonymous users2024-01-27

    Don't understand what you want to do? If it is an anti-theft lock, if you don't have a remote control and have a key, you can open the door, there is an anti-theft control box under the passenger seat, and you can pull out the fuse of one of the above.

  11. Anonymous users2024-01-26

    Summary. Hello dear. The method of lifting the anti-theft lock of BYD F3 engine is as follows:

    1. Disconnect the battery, power off the whole car for more than 15 minutes, and then reconnect the power supply and start the vehicle; 2. After inserting the key, screw it to the dashboard to light it up, and then close it, and it can be forcibly released for 10 consecutive cycles. After the BYD F3 is powered off, the anti-theft of the original car will be lifted. The correct way to do this is:

    Disconnect the battery, and the whole car will be powered off for more than 15 minutes. Then reconnect the power supply and start the vehicle.

    Hello dear, type acacia stove. The lifting method of BYD F3 engine anti-theft lock is as follows: 1. Disconnect the battery, power off the whole car for more than 15 minutes, and then reconnect the power supply and start the vehicle; 2. After inserting the key, screw it to the dashboard to light it up, and then close it, and it can be forcibly released for 10 consecutive cycles.

    After the BYD F3 is powered off, the anti-theft of the original car will be lifted. The correct operation method is: disconnect the battery, and the whole car will be powered off for more than 15 minutes.

    Then reconnect the power supply and start the vehicle.

    BYD F3 After the stove is broken, Li Dian will not only be lifted from the original car anti-theft, but also a lot of data of the car will be reset (restore factory settings). For example, the mileage of the vehicle, multi-** (audio) settings, etc., will be restored to the factory setting of the land cavity. Many vehicles with keyless start are now equipped with an engine immobilizer.

    Hello,BYD F3 one-button start,Changed a battery and then the anti-theft lock was locked,Turn off the fire when you hit it,Dear,Re-disconnect the battery line no。

    Dear, you can disconnect the battery cord again, and then use the remote control to unlock it.

    U0214 Fault Code! The remote control can open the door normally, and it can also be locked. Also power off for 15 minutes, pro, the meaning of this fault code is that the communication with the remote control function is lost.

    Uh-huh, what is this fault code doing?

    Dear, after your Huisong car troubleshooting, you need to clear the old pants obstacles**. When clearing the fault, it is necessary to clear the fault code according to the corresponding model, and it must not be used to remove the negative pole of the battery to clear the car fault code. It is recommended to check the power supply of the gearbox module, the Hu Bi Jian, and the CAN cable.

    Is it okay for the decoder to know the fault code? Do I need to re-record the data?

    Dear, yes. You can use the decoder to clear 1 fault code.

    The fault code is still the same.

    Dear, are you saying that this fault code has been eliminated, but the car is still out of order, right?

    Uh-huh, yes.

    Pro, find the square remote control of the original car, press the release button to lift the blind hail anti-theft, you can also turn on the ignition switch to find someone to push the car with 3 gears, or turn on the ignition switch and wait for 15 minutes to automatically unlock, and then you can grind the early sail and pull out the controller under the right seat to short-circuit, you can also play the car orange.

Related questions
25 answers2024-02-09

BYD you said that this ** is 10,000 yuan Accent you said that this car's ** is between 10,000 BYD's advantages are: fashionable and beautiful, strong power. Disadvantages: The appearance is a bit plagiarized from the flower crown. >>>More

10 answers2024-02-09

1. Check the air conditioning filter, the air conditioning filter is too dirty, which will lead to a small air volume of the air conditioner and increase the air pollution in the car. >>>More

3 answers2024-02-09

Appears memory can not be"read"There are many reasons, try to use the following methods to patiently eliminate them. >>>More