Winter heating, radiator smoked wall, how to protect the white wall from black?

You can use a semi-dry rag to wipe off the blackened part of the wall, if the radiator is used for too long, it is difficult to wipe off with a wet rag, you can use sandpaper to rub it after the heating period is over, scrape off the original blackened surface, and then repair it with paint.

Use a hair dryer at home to blow the air on the blackened part of the wall to blow the dust off, brush the detergent with a discarded toothbrush and clean it up.

You can make several small baffles on the wall above the radiator, which can not only put handicrafts on the baffle to beautify the space, but also solve the problem that the wall is easy to be yellowed.

You can install a heating cover on the top of the heater to prevent the radiator from smoking the wall, so that the effect will be much better.

The wall turned black, it was the kind of iron radiator from a long time ago, and now it is a ceramic radiator, he can constantly control the temperature, and he can also control the temperature.

If you want the white wall to not be black, you can choose to put a board between the radiator and the wall to avoid being blackened.

Now there's also that kind of radiator cover, or you can put a damp towel on the radiator, you can put wallpaper.

The reason why the wall is blackened is that the convection of hot and cold air above and below the radiator, the hot air is above, the cold air is below, and the particles suspended in the air are slowly attached to the wall above the radiator, and after a long time, the wall will become black.

First: use radiators with a slight effect of radiators, such as die-cast aluminum radiators, steel plate radiators, copper convection radiators or underfloor heating.

Second: add a shield or light yarn above the radiator. This in turn prevents floating particles from entering the wall.

Third: Place glass or wallpaper above the radiator that can easily remove particles.

ps: The Satoria radiator is recommended to use tin foil, place tin foil above the radiator, and cover the part of the wall close to the radiator with tin foil, which has two advantages, one is: the wall is blackened, which effectively blocks the particles suspended in the air and attaches them to the wall; The second is:

With the presence of tin foil, it will prevent the heat emitted by the radiator from being absorbed by the wall, thus greatly increasing the temperature of the room, killing two birds with one stone.

Clean up the walls that have been blackened by radiators.

1. Tools: hair dryer, small brush, detergent.

Method: Use a hair dryer to blow the area to be cleaned, after blowing off the dust, use a small brush to brush with detergent to clean the dust first and then brush.

2. Tools: rags, sandpaper, paint.

Method: The first step is to wipe off the floating ash on the wall with a damp rag;

The second step is to sandpaper the blackened wall;

In the third step, apply the paint evenly from top to bottom.

There's no good way, leave it alone, the worse it gets, the more you wipe it, the dirtier it gets, and the new paint and the old paint have a big difference in tone, unless they are all repainted, and you can try it with alcohol.

Solution:

1. When sanding the wall with sandpaper, sandpaper with different thicknesses should be selected, and the thickness of the sandpaper should be written on the back in the form of numbers, the larger the value, the finer it is, and the rougher it is.

2. When applying paint, the paint and water are diluted in a ratio of 5 to 1.

3. Using paper and other materials to cover or paste wallpaper is a good way to prevent the wall from being blackened.

Specific steps to deal with blackened walls:

The first step is to wipe off the plaster on the wall with a damp rag.

The second step is to sandpaper the blackened wall;

In the third step, apply the paint evenly from top to bottom.

I can tell you this question, because our family has encountered such a situation before, Rubens radiators have a special anti-smoke wall hat, which can greatly reduce the pollution of the radiator on the wall, and the effect is quite good

1. Clean the household frequently, and the accessories of the radiator need to be cleaned frequently, so as to reduce dust and avoid the wall being blackened, which is the most fundamental solution.

2. Add a shroud above the heater.

3. Buy a breathable fabric material to cover the radiator to prevent it from getting dirty.

4. A towel or damp cloth above the wall above the radiator can absorb dust.

5. Put a baffle above the radiator to prevent the wall from becoming black.

6. Go to the building materials supermarket to buy a special corner frame for the radiator and install it on the top and side of the radiator, which can not only prevent the wall from being blackened, but also place some things, which is very convenient.

The heating pipe flows with hot water, and the heat in the hot water is emitted through the radiator, which is colorless and odorless, how can it blacken the walls. You're just worrying about it.

How to solve the problem that the radiator "blackens" the wall? Teach you 2 tricks to make the wall as white as new.

The temperature of the wall is low, and the temperature gradient in the horizontal direction is large, which will cause the dust in the air to move towards the wall, and eventually cause a large amount of dust to be adsorbed on the wall surface. That's why the wall next to the radiator is dark, but the wall next to the air conditioner is not. Some of them will be absorbed by the wall.

In addition, the high temperature makes it easier for the molecules of fine dust to move into the wall. The air above the radiator has the fastest velocity and the highest temperature, so the wall above the radiator is the most likely to be blackened.

In the process of upward movement of hot air, the dust in the air is driven to flow together. And this flowing empty dust ends up on the wall above the radiator. As time went on, the white wall above our radiator slowly turned black.

Most of the fine media passes through the radiator, which is the heating element, and the black accumulation will be more or less different depending on the roughness or flatness of the wall.

So there are more gaps, so it looks darker. The wallpaper is basically no different from the plastic sheet, the dust is difficult to adhere, but there will also be traces, but it is easy to scrub. The tiles are smoother, and can only be attached to some floating ash, and they will be wiped off.

Friends who have external heating at home will encounter such a problem, that is, after the heating period is over, behind and above the heating, you will see black marks on the wall more or less dark or shallow, as if the wall is "blackened" by the heating.

If the heating heat dissipation is not good, it will directly affect the indoor temperature of the residents. There are also people who make heaters and boxes and keep the heaters inside. This also prevents the walls from being blackened, but there is also a problem, that is, it affects the heating heat dissipation, and the heating effect is not good in winter.

Place a towel or cloth over the heaterThe heat flow is dispersed, so that the air flow of the dust is also dispersed, and the wall can not be blackened in a concentrated manner, and the dust will be adsorbed on the towel after a period of time, and regular washing can play a certain role.

There are three tips.

1. Cover the radiator with a few large wet towels, and replace the towels in time.

2. Make a partition above the radiator to prevent the wall from being blackened.

3. Start from the root and choose radiators with anti-fumigation wall design.

We should pack the radiators, and we should dress them in a way that doesn't blacken the white walls, and they look very good.

The best thing to do is to separate the radiator from the wall with a wooden board so that the wall is not blackened.

After the heating is turned on, the wall is blackened, which is unsightly, and the black and white walls look very uncomfortable and annoying. So, how do you prevent radiators from blackening your walls? Let's follow the golden flagship flag brother to find out.

Radiator smoked wall conventional solution.

1. Install a radiator mask for the radiator.

Although it is said that the radiator mask can solve the problem of radiator fumigation, but in fact, this method is not recommended, on the one hand, the current heating shape is basically beautiful and does not need to be blocked, on the other hand, the radiator mask will also seriously affect the heat dissipation effect of the radiator.

2. Put a towel or cloth on the radiator.

This method has some effect, but it still has its drawbacks. The towel has poor air permeability, which disperses the heat flow, so that the air flow of dust is also dispersed, and the wall cannot be blackened in a concentrated manner. And this method also has its shortcomings, that is, it can only prevent the middle from being blackened, and cannot prevent the outermost wall from being smoked.

3. Install a storage baffle above the radiator.

This method of installing the object baffle can completely protect the wall above, and it is well protected for this part of the wall. However, the disadvantage is that the dust in the air cannot be filtered out, the dust just changes the direction of flow, and it is blocked by the board and flows outward along the edge of the board, which eventually causes the wall on the outside of the board to be blackened, and the top of the wheel side of the board family will also be obvious.

4. Use an air purifier.

Turn on the air purifier in the heating area, which can effectively filter out the gray dust in the air, and the rising air flow will not change the flow direction, and there will be no dust, and the wall will naturally not be smoked. Although this method is more effective, the number of whole indoor radiator groups is large, and it is easy to take care of one or the other, and it also increases the additional cost.

Fumig-proof wall radiator solutions.

In view of the problem of radiator fumigation wall, in fact, many radiator manufacturers have invested in relevant research and development to solve, as an aesthetic radiator who has been engaged in technology research and development innovation, naturally there is also a unique anti-fumigation wall radiator solution.

Aesthetic Spike Radiator has successfully independently developed the first domestic product that integrates the triple function of "environmental protection, safety and anti-fumigation wall" - "anti-fumigation wall" series copper-aluminum composite radiator, the radiator increases the anti-fumigation wall buckle cap design, and the unique anti-fumigation wall principle design, which greatly effectively eliminates the yellowing and blackening of the wall, and the protection of the wall is almost perfect, which is the best choice for the taste group. At the same time, it has a large waterway, large fins, large heat dissipation, stable and elegant design, through the audit of tens of millions of processes, Dahua to meet the needs of modern high-end people's home life.

Radiators are almost one of the must-have products for heating in the north, almost throughout our winter! Therefore, if you want to have a better anti-smoke wall effect, in addition to choosing the right radiator, you should also pay attention to cleaning during daily use to reduce dust and bacteria in the air, so as to enjoy a better warm life.

In fact, strictly speaking, the radiator itself is not smoked on the wall, and the current wisdom of the wall seems to be because the radiator heat dissipation drives the dust near the radiator to rise, and it is formed by attaching to the wall, so pay more attention to cleaning and pay attention to indoor humidity. Rubens Heating hopes to help you.

In the application of ambiguous tablets in some homes in China, the wall will be "blackened". What should you do in two years for a newly renovated house? Share with you how to solve and prevent the problem of radiators "blackening" the wall.

The flakes heat the surrounding gases according to their own calorific value, hot air and strong cold air. In general, hot air is coarse. During the upwelling process, some dust will be sucked up on the wall, which will cause smoke on the wall and cause the radiator to be damaged.

In fact, dust is adhered to the walls.

If it is putty powder wall, you can polish it with water sandpaper, and you can batch putty again if necessary. If it is a painted wall, you can sweep the wall with a soft brush. If you can't use a hair dryer, you can only use a sticker for temporary healing.

In the middle and later stages, the stains can be sanded and polished and brushed, or they can be hand-made and painted or covered with decorative paintings on the wall.

When the baffle is used on top of the radiator, hot air can be drawn from the wall to reduce the problem of the radiator smoking on the wall. The key is the dust in the house. If the dust is not large, this problem is not possible.

This problem is caused by a large amount of dust in the room, and during the winter heating period, the humidity in the room is low, and the dust is very easy to fly. It is often advisable to clean the dust around the radiator and the dust inside, use an air purifier, or often clean the wooden floor and sweep the wall, and the radiator should not be installed too close to the wall, which can easily cause smoke on the wall. In addition, the flow rate should be installed around the perimeter of the radiator cover to prevent the hot air from rising immediately and close to the wall.

At this stage, the most common and effective method is to install a stop whose length and overall width cover only a few radiator points in the radiator. It's best to opt for tempered laminated glass or stainless steel sheets for faster care and longer lifespans. Dirt removal reduces cyclone elevation standards caused by radiator heat.

Due to the lack of cyclonic standards, the seepage of dust around the enclosed radiator will largely subside, otherwise the oscillations placed on the radiator will cause a lot of dust.

In the process of using radiators in some of our homes, there is a phenomenon of "blackening" of the walls. What should we do in a few years for a newly renovated home? Share with you how to solve and avoid the problem of radiators "blackening" the walls.

Radiators heat the air around them by using their own heat, hot air, and cold air. Usually, hot air is dry. In the process of upwelling, some dust will be adsorbed to the wall, which will cause the wall to smoke and produce the radiator phenomenon.

In fact, dust is stuck to the wall.

If it is a putty wall, it can be sanded with fine sandpaper, and the putty can be re-scraped if necessary. If it is a latex painted wall, you can sweep the wall with a brush. If you can't blow the air with a hair dryer, you can only stick it on as a temporary **.

When it is renewed, the dirt can be sanded and painted, or it can be painted by hand or covered with paintings.

When you make a partition above the radiator, you can direct hot air out of the wall to reduce the problem of the radiator emitting smoke on the wall. The key is the dust in the house. If the dust is small, this problem does not occur.

This problem is caused by too much indoor dust, which tends to fly when the indoor humidity is low during winter heating. It is often advisable to clean the dust around the radiator and the dust inside, use an air purifier, or clean the floor and sweep the walls frequently, and the radiator should not be installed too close to the wall, which can easily make the wall smoke. In addition, the flow rate should be installed around the radiator top cover to avoid a direct increase in hot air and rise close to the wall.

Currently, the most widespread and efficient method is to install a stop whose length and width cover only multiple radiator points in the radiator. It is best to choose tempered glass or stainless steel for better care and longer lifespan. Decontamination reduces the airflow rising conditions generated by the heat energy of the radiator.

Due to the lack of airflow conditions, the turbulence of dust in the vicinity of the enclosed radiator will largely disappear, otherwise, the disturbance placed on the radiator will generate a large amount of dust.