I m a beginner in driving, how many questions do I ask? 100

Updated on culture 2024-02-09
16 answers
  1. Anonymous users2024-02-05

    Pull over and pull over 1Right turn signal 2Look in the right rearview mirror 3

    Turn the steering wheel to the right 4The steering wheel is back to the right 5Hit the brakes 6

    Step on the clutch 7Pick neutral 8Pull the handbrake 9

    Turn signal 10Look in the left rearview mirror 11Get out of the car and close the door This is a requirement at the time of the driving test.

    Another thing to slow down during the test is: the speed of the car is too fast, slow down to control the speed.

    The engine hums so loudly that it's time to upshift, and the car obviously feels shaking, so it needs to be downshifted. And then when to add and reduce the gear novice can glance at the speedometer, probably know (each gear is 5---10 lower than the normal driving time) when learning to drive is strictly forbidden from the first gear to the third gear, but the downshift can be reduced by skipping the grade, such as the 5th gear reduced to the third gear, it is best not to skip the level too much. It's not good for the car.

    When learning in driving school, the instructor should teach semi-linkage. The most important thing to control the clutch and brake is to be too light and too clutched, and you can use the brake to control it when you feel the speed, just lightly.

    The above are all just out of driving school Ding Ding Xiong according to the instructor's teaching, we use Santana, I don't know if it will be useful to you.

  2. Anonymous users2024-02-04

    1.The absolute right one is ABCDEF (most people think that you have to neutral first and then handbrake. This is actually not safe), neutral gear must be hung after the handbrake is pulled.

    2.The slowdown depends on the situation at the time, except for what you said. It's better to slow down when encountering pedestrians or something.

    3.The sound of shifting gears is an experience, unspeakable, generally a gear can be shifted by stepping on the accelerator for 2-3 seconds, so to speak, 1 is the start, as long as the car moves, you can shift to 2nd gear, 3, 4 gears are not too hard requirements, 50+ kilometers can be changed to 5 gears. You can't jump upshifts, but you can't jump downshifts (engine braking method in case of emergency).

    4.Utilize the half-clutch state. Practice more and apply the brakes gently.

    Driving is practice makes perfect, and you must use first gear to start. Otherwise, it will cause great damage to the car.

  3. Anonymous users2024-02-03

    Don't be too dead to read, you need to be flexible.

    In particular, the second problem is that when encountering unfavorable situations, braking in advance, flexible judgment This is related to the number of times, time, and proficiency, especially often car accidents are 1 second judgment problem. . . .

    The third question, don't think so much, you just follow the operation taught by the teacher, step by step in the exam, step by step downshift, skilled in the actual situation to see how you use it, the increase must be 1-2-3-4-5 unless it is acceleration after deceleration neutral, see the speed of the car continue to increase in 2nd or 3rd gear.

  4. Anonymous users2024-02-02

    Your question options are mixed.

    1. Pull over (only park on the right), 1Look in the right mirror, look back at the rearview mirror at the same time (see if there is a vehicle on the right), and turn on the turn signal at the same time2Turn the steering wheel to the right (you can only change one lane at a time, if you have two lanes, do two 1 and 2 actions) 3

    Pull over and start slowing down and apply the brakes4Wait until the car is about to stop (novices feel that the speed is at 20 yards) and press the clutch at the same time to know that the car has come to a complete stop.5Hang neutral 6

    Pull the handbrake. 2. When to slow down 1In the case of zebra crossings (with or without people, slow down, just symbolic slowdown, this is for the exam) 2There are obstacles ahead (e.g. vehicles, poor road conditions)3Pedestrian.

    Third, first of all, you can't overgear (that is, jump gear), from 1-3 gears are easy to jam gears, and there is no 4-1 gear to reduce gears, the same way. How to judge the appropriate gear, novices look at the speed of the dashboard, generally to 1500 rpm, you can add two gears. To more than 2000 rpm can add three gears (this is a very stupid way) after familiarity can listen to the engine sound to judge, the general experience is to hang a gear throttle car is not strong, this is to add two gears.

    Fourth, this point only their own practice makes perfect, learning to drive is their own feeling, the coach can only teach the method, a lot of their own experience. This is something that the instructor will let you practice straight forward and backward when you are learning to drive, which is how you feel to control the clutch. Don't think it's easy or boring, that's the basics.

  5. Anonymous users2024-02-01

    I just want to tell you 3 words, which is semi-clutch.

    Open manual transmission, semi-clutch is too important.

    The manual transmission can be turned on however you want.,I sometimes have to play 5th gear to start.。。。 You really need to figure this out on your own. Many people have different driving habits, don't listen to others, be sure to feel it yourself.

    I've been playing with cars for three years. Now I think I'm a backbone... Nothing ever happened.

  6. Anonymous users2024-01-31

    1.You don't need to hang neutral when parking, just press the clutch. The main steps are to steer, step on the clutch, decelerate appropriately, pull the handbrake first and then hang neutral after pulling over and stopping (this is very important, otherwise points will be deducted), and then let go of the clutch and foot brake.

    2.When in low gear, reduce the speed to the appropriate speed.

    4.The fourth gear to the first gear is called the gear rush theory, it is used for emergency braking, and it cannot be used during normal driving. The first gear to the third gear is not allowed, so the throttle is not suitable, and the speed of the first gear is not enough to go to the high level.

  7. Anonymous users2024-01-30

    Just open more! I don't know how to ask the coach what I'm afraid of! Most of the experience of coaching on the road is invaluable! Don't be afraid!

  8. Anonymous users2024-01-29

    1 a,c,d,b,f,e

    2 From high to low.

    3. When the speed is low and high, the engine roars loudly and unnaturally; You can jump gears, as long as the speed is enough.

    4 When the clutch is stepped on to the end, there will be no power, and the inertia of the car will remain.

  9. Anonymous users2024-01-28

    1, ACD2, when decelerating from high speed to low speed.

    3. You can't jump gears, so it's easy to turn off.

    4. Generally only step on the clutch.

  10. Anonymous users2024-01-27

    2500 upshift, 1500 downshift. It can be jumped or decreased, but not jumped.

  11. Anonymous users2024-01-26

    Here are some of the questions to ask when getting a driver's license:

    1. Distance. First of all, the driving school should be close to the place where it is, if it is too far, it will take too long to practice driving every day.

    2. Fees. Recently, the driving school driver's license has been **, but the approximate price is about the same, you can ask a few more to find a **more reasonable.

    3. Whether you have your own test center? Generally, driving schools that take their own test centers are more convenient when taking the test, and they can be ranked in front. And driving schools that don't have their own test centers will wait until the end of each test, which is time-consuming and laborious. Moreover, if you have your own test center, the speed of completing the subject will be greatly improved.

    4. Whether the registration fee for teaching is included in all. Some driving schools will ask candidates to pay the registration fee, medical examination fee, and make-up test fee for each subject at the time of the test. Some driving schools directly include the medical examination fee and the retake fee.

    5. If all four of the above are satisfied. You can look at the people who are already practicing and the attitude of the coach on the field when you pay the fee, and you can know how the coach treats the students during training. It is necessary to find someone with a good temper and good technical skills.

    6. After choosing a driving school, work hard to learn and practice driving. As long as you follow the requirements, you can get a driver's license in about three months. Of course, there are exceptions, depending on how you practice the car. Currently the driver's license is a section.

    1. Section. II. Section.

    Third, subject 4 will also draw some people to take subject 5.

  12. Anonymous users2024-01-25

    Students must ask whether the driving school registration fee includes all items, whether there will be additional fees in the middle, how long the license period is, the distance, the quality of the instructor, whether the instructor can complain and replace the problem, and whether the student has purchased insurance.

    To apply for driving qualifications, you must pass a medical examination.

    The physical examination items include:

    1。Height: Applicants for large buses, tractors, city buses, large trucks, trolleybus driver's licenses, height of 155cm or more. Those who apply for the medium-sized passenger car quasi-driving type, with a height of 150cm or more, is the first step in the physical examination of learning to drive.

    2.Vision: Apply for large passenger group buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses or tram quasi-driving types, and the uncorrected visual acuity or corrected visual acuity will reach above the logarithmic eye chart.

    Other quasi-driving types, binocular uncorrected visual acuity or corrected visual acuity above the logarithmic visual acuity chart.

    3.Color discrimination: no red-green color blindness. In fact, the content of the physical examination for learning to drive is consistent with eyesight.

    4.Listening: Both ears are 50 cm away from the tuning fork and can distinguish the direction of the sound source.

    5.Upper limbs: The thumbs of both hands must be sound, the other fingers of each hand must have three sound, and the limbs and fingers have normal motor function.

    6.Lower extremities: normal motor function. When driving a manual transmission car, the unequal length of the lower limbs shall not be greater than 5 cm. When driving an automatic transmission car, the right lower limb should be sound.

    7.Trunk and neck: no motor dysfunction.

    Millions of car purchase subsidies.

  13. Anonymous users2024-01-24

    Why is the higher the gear, the slower the speed?

    The relationship between gear and speed can be analogous to riding a bike. When you're on the bike, low gears (big gear) make it easier to start or go uphill, but not too fast; The uppane (pinion) is harder to start or uphill, but can get more speed. The same is true for the transmission of a car.

    Low gears (e.g. first gear) correspond to more torque, which helps the car to start or climb hills, but comparatively, the speed will be slower. The high gear (e.g., 5th and 6th gear) corresponds to less torque, which results in slower acceleration but can reach higher speeds in a steady state.

    Why does the higher the gear level, the slower the engine speed rises?

    In the high gear, the gear between the engine and the drive wheels is relatively large, and the engine needs more speed to propel the vehicle forward, so the engine speed rises more slowly. In other words, with each engine rotation, the wheels will turn a larger distance, which requires more time and energy to achieve.

    Is the engine speed the same for each gear with the same number of buttons?

    More often than not, not exactly. Your throttle position determines how much air is taken into the engine, which affects the engine speed. But in reality, the speed of the engine can be affected by many other factors, including the speed of your vehicle, the weight of the carry, road conditions, engine load, etc.

    So, despite being in the same gear, pressing the same throttle, the engine speed may be different.

    Pressing the same size of throttle in every gear Is the engine injecting the same amount of fuel?

    Again, it's not exactly the same. The position of the throttle determines the amount of air intake of the engine, and the amount of air intake will affect the amount of fuel injected into the engine. But again, the amount of fuel injected into your engine can be affected by many other factors, such as your vehicle's speed, load, road conditions, engine load, etc.

    After each gear shift is completed, does the car start to speed up as soon as you step on the accelerator?

    In general, yes. When you're done shifting gears and start pressing the accelerator, the car should start accelerating. However, the speed of acceleration can be affected by many factors, including how well you step on the accelerator, your gear, the state of the engine, the weight of the car, road conditions, etc.

    For example, if you're climbing a hill or the car is very heavy, you may need to press the accelerator bigger to get the car to start accelerating.

  14. Anonymous users2024-01-23

    The engine output is constant and the power is constant. 1st gear, one rotation of the engine, one rotation of the wheels, 7th gear, one rotation of the engine, eight rotations of the wheels, so the first gear accelerates quickly.

    When you press the throttle to the end, the power output is the same at the same rpm. However, the transmission ratio of different gears is different, the wind resistance is different at different speeds, the resistance is different for different slopes, and so on.

    The lower the gear, the faster the air carrier accelerates, but the speed will be high when the speed is increased, which will cost fuel.

    The higher the gear, the slower the acceleration, but it can reach higher speeds at lower revs and save fuel.

    Stepping on the throttle at the same depth, the low gear speed jumps up faster, and the high-end box bends and jumps up more slowly, or even jumps away.

    When overtaking, it's important to overtake the car in front as quickly as possible, so the faster you can speed up, the better, which requires downshifting.

  15. Anonymous users2024-01-22

    The driving school charges a lot of money, whether it is a fee system, what is included in the registration fee, whether to pay other fees in the later stage, the model of training, the cycle of the test, the test in the ** test, how to arrange the practice time, how to make an appointment for the test, whether there is a shuttle bus transfer, whether to sign an agreement ......and so on

  16. Anonymous users2024-01-21

    Ask the price of the school car, whether it is a copy or a one-time fee. What model to learn. If you hang up, you can retake it for free a few times. Section 2 Examination Room.

    Is it on your own campus. How much does it cost to go to the exam room to practice? Driving School Shuttle Bus Routes. Whether it supports online car-hailing and appointments. When is the peak time for making an appointment, and when is it good to make an appointment? I didn't charge for the default of the car.

Related questions
18 answers2024-02-09

First of all, the defender, if a beginner has figured out their own positioning, then they can train with a purpose, and they can improve faster. The type of guard generally focuses on the ball control training of the left and right hands and the layup of the left and right hands, and the general training method is as follows: (the daily training time is not much, about an hour and a half can be completed, but the focus is on persistence, not how hard the training is). >>>More

7 answers2024-02-09

oral English More practice can achieve obvious results in a short period of time But once you stop, go back methods:Talk more Watch more English movies Cultivate language sense and English thinking Think about how to say a sentence in English Start with the simple.

11 answers2024-02-09

Don't take their word for it, the Johnson JD16 is the brand's problem model, you should know that the thinner the panel, the better the tone, okay? In order to improve the tone, Johnson produced a batch of problems with thin faces, which would bulge the top due to the pull of the strings over time, and there was a possibility of cracks ......So whether it's a physical store or **JD16, it's quite cheap. >>>More

20 answers2024-02-09

Accounting is not a difficult major. I didn't find it too difficult when I studied before. >>>More

17 answers2024-02-09

string a = "a,b,c";

string arr = ',');Based on the comma, it is divided into an array of strings, and the contents of the array are three values: a, b, and c. >>>More