Partitioning issues and software installation issues with your computer s disks

This depends on your actual needs.,It's recommended not to divide too many disk symbols.,The general 5 will do! For example: it is useful for systems, work and study, entertainment, miscellaneous, system drivers and backups.

The drive letter of the C drive and the system driver backup should not be too large.

As for installing the software, install the C disk.,Don't put the C disk in the installation package.,The green version of the software doesn't put the C disk.。

Generally, the system only makes C disks, so that your usual things can still be left! Hehe!

The C disk allocation is relatively small, XP is about 10G is enough, and Vista is more. Other plates can be divided into entertainment, tools, files and other areas according to personal preferences, and the plates of entertainment games and movies should be larger! Generally, it is recommended not to install a C disk, and do not put a C disk on the files, and the C disk is a system disk to put the system.

Because in the event of a system crash, redoing the system will cause the loss of other files in the C drive!

C:30-D:110-E:120-F:120-G:120As long as it is not installed in the C disk, you can choose to divide it into other disks! There is a selection path when installing in the middle, and you can choose it again!

The system disk should not be too large, about 20g is OK. The source files are placed in a separate partition, and the files after installation can be placed in the same partition as your usual documents, and the rest is divided according to your personal preferences, such as movies, games, etc.

C disk 50G, install the system, kill the soft, input method and other relatively fixed software.

D drive 50G to install your relatively large common software, such as Photoshop, etc.

E disk 50g to install the game's software.

The 50g drive on the F drive holds the source files of the software.

G disk 100g to store study materials, work materials, etc.

The h disk is a movie ** or something.

C disk is divided into 20G is enough,Windows 7 online system disk requirements are larger than XP,** files do not be placed in C disk,When installing, see if the software can be used after reinstalling the system,If you can use it, you can install it in other disk letters,If you can't use it, you can install it directly in the C disk。

See how you want to use it later. If you don't have any special files to save, then there's no need to go to the partition, just use the C drive, it's convenient, you can install it directly when you install the software, and it's done by pressing the next step.

In this case, you need to use a system image with an AHCI driver, and load the driver during the installation process to find the hard disk.

Cause: The computer's hard disk mode is not changed to a compatible IDE mode.

1. Restart the computer first, and when you turn it on, you keep clicking the "Delete" button to make the computer enter BIOS mode.

2. Then in the BIOS mode settings page of the computer, find the "Advanced" setting option, press the arrow keys to select the option.

3. Then in the pop-up window, select the "IDE Configuration" setting option, and press Enter to confirm.

4. Then in the pop-up window, select "Onchip SATA Type", press Enter to confirm, and select the mode as "IDE".

5. Finally, press "F10" to save.

Change the BIOS hard disk interface to IDE compatibility mode, and then try again, take a Lenovo notebook as an example, and the method is as follows:

1. Turn on the power of the laptop, and press the F1 shortcut key to enter the BIOS settings when the Lenovo logo boot screen appears, as shown in the figure below

2. Then use the left and right arrow keys to move the cursor to the "config" menu, and then use the up and down arrow keys to move the cursor to the "Serial ATA (SATA)" option, and press the enter key to execute, as shown in the following figure:

3. After entering the Serial ATA (SATA) window interface, you can see that the sata controller mode option is "AHCI" in parentheses after it, press the enter key to continue, as shown in the following figure:

4. In the pop-up window, use the up and down arrow keys to move the cursor to "compatibility" and press the enter key to confirm the execution, as shown in the following figure:

5. After completing the above operations, press the F10 shortcut key to save the settings, a prompt window will pop up, press the Y key to confirm the save, exit and automatically restart the computer.

1) The first reason: that is, the hard disk mode is different, resulting in the use of U disk reinstallation does not recognize the hard disk, because most of the hard disks of the computer are serial port hard disks, and the ordinary XP installation disk and the Ghost version of the installation CD, they do not integrate SATA control driver (or some are also integrated, but do not match the actual SATA control driver), resulting in incompatibility, and can not identify the hard disk, resulting in the inability to install the operating system or blue screen normally, so it is necessary to change the mode of the hard disk, change the AHCI to IDE mode, and the hard disk can be recognized and the system can be installed normally.

Hope it helps.

Ask how to switch.

It is necessary to partition the disk when reinstalling the system.

unist specified don’t exist. shsucdx can’t install

Translated to this, it means: a specific partition (unit) does not exist, and shsucdx cannot be installed.

shsucdx(.com) is the program for the optical drive extension under DOS, install the SATA optical drive program.

Possible reasons for this issue:

1. The hard disk partition has not been activated (you can use fdisk or diskgen to view, and diskgen to view the activated partition is marked in red).

2. Hard disk bad sectors.

3. The hard disk cannot be recognized normally (for example, some SATA hard disks cannot be recognized by the DOS system that does not load SATA driver).

Diagnosis & Resolution Process:

1. First, use the diskgen tool to check whether the system partition is activated (reactivate the partition that will be installed by the system) and the file system format of the partition (such as NTFS or FAT32). Then the problem is still not solved, and then the following operation continues.

2. Reboot into BIOS (press F2), restore factory settings (load manufacture defaults), set the disc boot (boot -> cd *** drives), set the hard disk mode to compatibility mode (advanced ->ide configuration ->sata..).mode — compatible).

3. Then save, restart, and start to install the system with the ghost system disk. Problem solving.

PS: If you don't want to be so troublesome, then install it with a pure system disk, or change to a higher version (with SATA optical drive drive) Ghost system disk to install. In addition, you can use the PE system of the GHOST system to install it (enter the PE system, and you can see the "GHOST installation" system on the desktop).

Update: If there are bad sectors on the hard disk, you can detect the location of the bad sectors, and then create a separate partition for the bad sectors to hide the bad sectors partition!

After partitioning, you need to manually set the main partition to the active partition, otherwise you will not be able to find the boot partition after installing the system with ghost, and you will not be able to boot from the hard disk.

Change the hard disk mode to a compatible IDE mode in the CMOS settings.

Received when you try to install the software"The partition does not exist"or"Drive system"This usually means that there is not enough space in the hard drive on your computer to install the software. This may be because the soft leather envy needs to be installed in the default directory of the system (usually the C drive), and your C drive does not have enough space to accommodate the software.

In many cases, installing software requires copying files to your computer's hard drive, whereas by default, most software copies files to a C drive. So, if you don't have enough space on the C drive, you may not be able to install the software successfully.

If you want to install the software, but the C drive is not running out of space, you can try the following solutions:

Transfer some files or folders to other hard drives: Transfer larger files or folders to other hard drives to free up C drive space.

Reallocate hard disk space: Use the disk management tool to reallocate hard disk space to expand the space of the C drive.

Install the software to a different hard drive: When installing the software, choose to install the software on a different hard drive instead of the default C drive.