The hard disk is reading the file, the noise is very loud, is the hard disk about to hang

Hard disk due to its mechanical rotation, inevitably caused by the generation of noise, with the development of technology, glass disc, liquid hard disk and other new technologies applied in the production of hard disk, so that the noise suppression technology of hard disk has a great development, in addition to updating the hardware we also have other ways to reduce noise, this is the use of hard disk noise reduction tools such as IBM Features Tool.

The technology based on this software is the common AMM technology (Acoustic Mangement Mode) in the hard disk industry, that is, the sound management mode, which works by reducing the seek time of the hard disk to reduce the noise of the hard disk seeking, which will cause the performance of the hard disk to be reduced, but because the technology only reduces the seek time, it will not affect the continuous reading of the data.

This software can go to the IBM official ****, the file size is, after the installation is completed, the software will prompt you to insert a floppy disk, and then start with a floppy disk, first enter the main interface of IBM Features Tool, at this time we can see the model of the hard disk, serial number, size, cache capacity, firmware version, whether it supports AMM and other information, then we can press Alt+A to enter the noise setting, the menu has three items, We just need to select the second item: enable(recommend value) and press OK to start again.

It should be noted that this setting reduces noise by 10 to 15 at the expense of 1ns seek time. This has an impact on the overall performance of the machine, but for the average user, the sacrifice is well worth it.

Once the seek noise of the hard drive has been reduced, we can also set the hard drive suspend mode to reduce the overall noise of the hard drive, we just have to set it in the BIOS. The option is HDD Power Down and we can choose a variety of lengths and shorts that we can choose according to our needs.

Generally, this kind of problem is caused by too many bad sectors of the hard disk, you can run a disk defragmenter, the problem should not be big, if this sound is temporary, that is, when you run a large program, the hard disk is looking for a large track, don't care.

There is also a hard drive temperature of 29-31 degrees, you better add the temperature of the external environment.

It may be that your hard disk speed is higher, because the hard disk is more or less loud when the speed is higher, if you are not at ease, test whether the transfer speed of the hard disk is normal, if it is not normal, it is recommended to repair it.

It doesn't matter, I'm doing VOD systems a lot, and I always promise that it's normal like a user. After a long time, there must be wear and tear, and the sound is normal. A hard drive can generally last up to 10 years without accident.

When is the hard disk, the working time of the general hard disk is almost 3*365*8 (hours), calculate it yourself, if the time is very long, quickly change the hard disk. It's really nothing louder.

What kind of hard drive is yours How big is it If it's more than 40g, it's just that the hard disk is ringing, there should be no problem, and it's normal for the hard disk to be a little loud.

How long has your hard drive been used If it has been used for too long, should you consider changing the hard drive? ~

It's okay, it's okay if the other normal sounds are a little louder, don't worry if you continue to use it.

If it didn't sound before, but now it's loud, especially if there is a click-la-rat-la sound, it's best to pay attention and don't store important things on it.

It may be that the arm of the hard drive is loose and it is recommended to reverse factory repair.

A disk is a medium that holds data, and it consists of a platter, a motor, a magnetic head arm, as well as a substrate and various chips. When the drive is powered on or the data is read, the drive motor will start to rotate under the guidance of the driver chip, and accordingly drive the head arm to look for the relevant sectors and tracks on the platter.

It is a process of purely mechanical movement, as people call it"Hard disk seeking"；In the process, it is inevitable that it will be issued"Click"Sound. Slightly"Click"The sound is normal.

However, if the hard drive is making a bumping sound, or a sound similar to a knife scraping a disc blade (and sometimes a chainsaw), then we need to pay attention. It is best to use relevant professional software (such as PQ, Diskgen, etc.) to check the hard disk. Find out if these noises are caused by bad sectors or the drive itself.

Once we detect bad sectors, we should try to fix them, and block them if they can't be repaired. For those who don't know how to use the software, it is recommended to change the partition to NTFS format. In this way, the system automatically identifies bad sectors and automatically deprecates them.

In addition, cleaning up disk fragmentation frequently can help reduce it"Click"Sound. With less disk fragmentation, hard disk seeking is relatively easier.

There are three reasons why the hard disk reads and writes loudly

1. The hard disk has been used for a long time and is aging, or the internal mechanical structure of the hard disk has failed, resulting in read and write errors and repeated reading and writing noise.

2. Data error, if there is an error in the file when the head reads some files, the head will increase the power to read it many times, and the reading will continue, and the error will occur if it cannot be read. There is a lot of noise during the process. It is not recommended to cut off the power supply directly during the working process of the hard disk, which will cause serious damage to the hardware system.

3. Installation problems. Because the hard drive is not properly fixed to the bracket of the chassis during installation, the hard drive vibrates during operation, causing damage to the head and platter.