Does the Toyota Corolla still use four wheel alignment for a new tire?

Updated on Car 2024-02-09
11 answers
  1. Anonymous users2024-02-05

    No, change the tires to do the dynamic balance! But it's better to change two at a time! 2 in front or 2 in the back, I don't know if you change to a different brand of different patterns or just change to the same brand of tires, if you change a brand of tires, then do a dynamic balance!

  2. Anonymous users2024-02-04

    Hello! According to your situation, it is recommended to do at least four wheel alignment checks, and the data is normal and can be omitted.

    Traditionally, the car should be re-positioned every 8,000-10,000 kilometers or so, so at least twice a year should be inspected.

    Check your tires for wear at least once a month. If the tire wears unevenly, for example, one side of the tire shoulder wears out faster than the rest of the tread.

    Or if you notice that your vehicle is shaking or mistracking, your vehicle may be poorly positioned or unbalanced. These conditions not only shorten the life of the tires, but also affect the handling of the vehicle and can be dangerous. If you notice irregular wear or shaky or mistracking, check the wheel alignment and balance right away.

    In addition, dynamic balancing is required to replace new tires, and dynamic balancing is required when replacing new tires or after tire disassembly and assembly. It is usually impossible to distribute the weight evenly 100% after the tire is mounted on the rim, use a balancing machine to test the balance of the tire rim in a sports situation, and use a balance weight counterweight at the unbalanced point to ensure that the tire can run smoothly and avoid shaking.

  3. Anonymous users2024-02-03

    Did you change one?? Tires! Is it a spare tire or bought a new one.

    If it's new, you'll have to change it. Spending a little more money this way can guarantee security. Do you want to do four-wheel alignment??

    Of course, you can make it safer. After all, safety is everything!!

  4. Anonymous users2024-02-02

    It is best to change a pair at once, and if you want to change the rear wheel, it is best to put the front wheel on the rear wheel, and install the new tire on the front wheel, and do the four-wheel alignment and dynamic balance.

  5. Anonymous users2024-02-01

    The following tires are for reference:

    1.Shuangxing car tires 195 60R15 for BYD F3 Cerato Corolla Elantra car brand new.

    **:¥2.Kumho car tires KH18 195 60R15 88H Corolla BYD F3 Ceratu Elantra adaptation.

    **:¥3.Giti Auto Tire 195 60R15 Wingro is compatible with BYD F3 L3 G3 F3R Corolla Vision.

    **:¥4.Michelin tires Renyue XM2 195 60R15 are compatible with Corolla Ceratu Elantra BYD F3

    **:¥5.Bridgestone car tires EP150 195 60R15 are compatible with Corolla Cerato BYD F3 Elantra.

    **:¥6.Giti Automotive Tires Wingro 195 60R15 88H BYD F3 G3 L3 Toyota Corolla Adaptation.

    **:¥7.Dunlop car tires SP T1 195 60R15 are adapted to BYD F3 Corolla Ceratu Elantra.

    **:¥8.Giti Giti Car Tire 195 60R15 BYD F3 Corolla Vision Elantra ** New.

    **:¥9.Bridgestone car tires RE88 195 60R15 are compatible with Corolla Elan Tek GL8

    **:¥10.Giti Tire 195 60R15 88H BYD F3 Baojun 630 Elantra Corolla Auto Tire **.

    **:¥

  6. Anonymous users2024-01-31

    1. The specifications of the tires you buy must first be consistent with the specifications of the tires assembled by the original car.

    2. Tires of the same specification, structure, manufacturer and pattern should be equipped on the same axle (the load index and speed level are the same).

    3. The load index of the replacement tire must be greater than or equal to the load index of the original tire, and the tire speed level of the replacement tire must be greater than or equal to the speed level of the original tire.

    4. The same brand of tires has the same pattern to represent different product positioning.

  7. Anonymous users2024-01-30

    1. If you want to pursue handling, you can choose single-guide tires, but this type of tire may have a lot of noise; And if comfort is what you value most, you can choose tires with staggered treads, which have good shock absorption but sacrifice some handling.

    2. Know the size and specifications of your vehicle's tires, and make sure that your new tires are consistent with the previous ones, and the speed level and load index are not lower than before.

  8. Anonymous users2024-01-29

    Theoretically, it is 2-30,000 kilometers of four-wheel cross transposition, 4-50,000 kilometers of tire replacement, but it also depends on your actual situation.

  9. Anonymous users2024-01-28

    First, the car exchange tires, that is, the four-wheel alignment usually referred to, is not determined according to the number of kilometers, but according to the actual needs to decide whether the positioning is required.

    Second, the four-wheel alignment is just a means of maintenance, under normal circumstances, if the car has no problems do not need to do four-wheel alignment, that is to say, only if the car really has a problem to do four-wheel alignment, so the four-wheel alignment does not need to be done regularly like maintenance, but should depend on the situation. The situation in which wheel alignment needs to be done is as follows:

    1. When replacing chassis parts related to the adjustment of four-wheel alignment parameters such as steering tie rods.

    2. When the front and rear tires are abnormally worn.

    3. When driving in a straight line, the vehicle deviates to the left or right.

    4. The steering wheel is fluttering, trembling or too heavy during driving.

    5. Data teaching is carried out after the tire of the whole vehicle is replaced.

    3. The four-wheel alignment is based on the four-wheel parameters of the vehicle, and is adjusted to ensure that the vehicle has good driving performance and certain reliability. The installation between the steering wheel, the steering knuckle and the front axle of the car has a certain relative position, and the installation with a certain relative position is called steering wheel alignment, also known as front wheel alignment. The front wheel alignment includes four contents: kingpin camber (angle), kingpin camber (angle), front wheel camber (angle) and front wheel toe.

    This is the relative position of the two steering front wheels and the rear axle for the two rear wheels, which is called rear wheel alignment. Rear wheel alignment includes wheel camber (angle) and rear-wheel toe-in by rear. In this way, the front wheel alignment and the rear wheel alignment are collectively called four-wheel alignment.

  10. Anonymous users2024-01-27

    The 10,000 kilometers just upstairs is a tire, not a change, so what about changing the tire, according to the tread depth of the tire, the tread situation and whether there is eccentric wear, often go to the 4S shop to do maintenance will check the tire. So you can rest assured.

  11. Anonymous users2024-01-26

    The theory seems to be 10,000.

    You can look at the pattern yourself, and if there is wear on one side of the tire pattern, you can switch the four corners.

Related questions
15 answers2024-02-09

Hello. Machine maintenance**, you can contact the service center for consultation, and the information of the service center can be queried by the following operations: BenQ official website ==> service support ==> service outlets==> Select your product, province and city. >>>More

9 answers2024-02-09

If you put it on the list, the crocodile is quite hot now. >>>More

9 answers2024-02-09

It's worthless, unless it's your own team battle that can't find your own hero, so buy a brightly colored **. >>>More

16 answers2024-02-09

It's good to run a kart, Telecom Zone 2 has just opened, and the props can be bought with the gold coins earned in the game, and the picture quality is also good! There are a lot of people playing it, and it's a good casual game!

9 answers2024-02-09

When you move to a new house, you can hire a new incense burner, and you can just throw away the ashes from the old incense burner, and you don't need to take it to the new incense burner. If the new incense burner is empty, you can put the rice from the old incense burner with the ashes into the new incense burner.