AMD XP2200 CPU Advice Master, please advise

Updated on number 2024-02-09
19 answers
  1. Anonymous users2024-02-05

    Upstairs complicates matters! It may be a problem with your motherboard, if the CPU does not work, there will be no alarm sound, you can also change the power supply to try it, first take off the board battery and then put it on, clear the CMOS to 0, and try again after one time, because I didn't see anything, and I can't be too sure that there is a problem! In short, there should be no problem with the CPU.

    The automatic shutdown may also be due to the CPU fan not working, the CPU is overheated or the CPU is not pressed after running for a while, and the motherboard is in order to prevent burning, so the automatic shutdown appears!

  2. Anonymous users2024-02-04

    Of course, the CPU with different pins is the model is not the same color, I have seen the AMD2200+ is green, I remember as if it was 462 really! I don't remember clearly.

    CPU alarm to see if the fan does not rotate, 462 needle angle of the fan is directional, it is easy to burn the CPU when it is reversed, I guess it was reversed at that time, of course the CPU can not be burned immediately, and it will be burned when you take it home! It's also possible that it didn't burn, but it was reversed, and some good motherboards have intelligent detection in this regard, to see if it's really reversed, re-put it on, and carefully observe the fan, which is directional!!

    Directionality: Facing the fan, turn 180 degrees clockwise or counterclockwise, either positive or negative!

  3. Anonymous users2024-02-03

    Compare it and know how to deal with it.

    Self-test bell Self-test bell meaning.

    1. Short: The system starts up normally.

    1 short, 1 short, 2 short, motherboard error.

    1 Short 1 Short 4 Short ROM BIOS verification error.

    1 Short 2 Short 2 Short DMA initialization failed.

    1 Short 3 Short 1 Short RAM refresh error.

    1 Short 3 Short 3 Short Basic memory error.

    1 short, 4 short, 2 short, basic memory verification error.

    1 Short 4 Short 4 Short EISA NMI port error.

    3 Short 1 Short 1 Short from DMA register error.

    3 Short 1 Short 3 Short The main interrupt handles register errors.

    3 Short 2 Short 4 Short Keyboard controller error.

    3 Short 4 Short 2 Short Error is displayed.

    4 Short 2 Short 2 Short Shutdown error.

    4 Short 2 Short 4 Short Protected Mode Interrupt Error.

    4 Short 3 Short 3 Short Clock 2 Error.

    4 short 4 short 1 short serial port error.

    4 Short 4 Short 3 Short Digital coprocessor error.

    1 Short 1 Short 1 Short System power-up initialization failed.

    1 short, 1 short, 3 short, CMOS or battery failure.

    1 Short 2 Short 1 Short System clock error.

    1 Short 2 Short 3 Short DMA page register error.

    1 Short 3 Short 2 Short Basic memory error.

    1 Short 4 Short 1 Short Basic memory address line error.

    1 Short 4 Short 3 Short EISA sequencer error.

    2 Short 1 Short 1 Short First 64k basic memory error.

    3 Short 1 Short 2 Short Main DMA register error.

    3 Short 1 Short 4 Short Handle register errors from interrupts.

    3 Short, 3 Short, 4 Short The screen memory test failed.

    3 Short 4 Short 3 Short Clock error.

    4 Short 2 Short 3 Short A20 Door Error.

    4 Short 3 Short 1 Short Memory error.

    4 Short 3 Short 4 Short Clock error.

    4 short, 4 short, 2 short, parallel port error.

  4. Anonymous users2024-02-02

    Of course, it's not a problem to be able to light up.

  5. Anonymous users2024-02-01

    Hardware cooling is the best way, and blowing it with a smaller fan is particularly obvious

  6. Anonymous users2024-01-31

    AMD Athlon 64 X2 3600+

    Slot type: socket am2

    CPU frequency: 2GHz

    Fabrication process: 90 nm.

    L2 cache: 256 KB x 2

    Number of cores: Dual cores.

    Core codename: windsor

    Thermal Design Power Consumption (TDP): 65W

    Applicable type: Desktop.

    Frequency multiplication: 10x.

    External frequency: 200MHz

    Core voltage: CPU series: Athlon-dual-core.

    Bus frequency: 1000MHz

    Number of pins: 940pin

  7. Anonymous users2024-01-30

    Yes, the CPU of AM3 can also be used, but only with D2 memory, so the performance is somewhat reduced. If you are cheaper, x2 240 and x2 250 can be considered, and the second-hand goods are less than 200 yuan.

  8. Anonymous users2024-01-29

    Go on the am2 am2 6300+ on the DDR2 memory DDR2 1066 should be enough.

  9. Anonymous users2024-01-28

    Congratulations, your motherboard supports open cores, it is recommended to go online to buy a package of 4 cores AMD5000, only more than 170 yuan, very good to use. I have one at home now.

  10. Anonymous users2024-01-27

    Yes, AM2, AM2, AM3 can be used!

    Get a $955,400 or so.

  11. Anonymous users2024-01-26

    AMD Athlonxp 2200+ Specs:

    Processor frequency GHz

    Processor multiplier.

    FSB 266 MHz

    System bus 133 MHz

    Instruction sets MMX, SSE, 3DNOW+ are supported

    As can be seen from the frequency parameters above:

    AMD ATHLON XP2200+ should be clocked at * = GHz), you appear to be displayed as ATHLON because your external frequency is set incorrectly, it should be 133MHz and your motherboard is set to 100MHz, so 100* is exactly = the CPU multiplier is, so the display becomes. To correct this situation, you can set the external frequency to 133.

  12. Anonymous users2024-01-25

    2200+ is not the actual frequency of the CPU, it is just a level that AMD has proven to be achievable after testing, the actual frequency is.

  13. Anonymous users2024-01-24

    Hello AMD Athlon, XP2200, it has some overclocking capabilities.

  14. Anonymous users2024-01-23

    2200 is good, almost, it is estimated that it is within 10%.

  15. Anonymous users2024-01-22

    AMD Athlon: XP2200 Good.

    Intel(R) Celeron(R) is all chicken bone stuff, especially Celeron D. It's tasteless to eat, and it's a pity to dispose of it!

  16. Anonymous users2024-01-21

    133, you're an athlon, aren't you? You look for it yourself in the BIOS.,There are detailed data about the CPU options.,If you want to overpower, you can change it yourself.,But 2200 is not good.,Overclocking performance is not good.。

  17. Anonymous users2024-01-20

    It's all cost-effective, it's all discontinued, how can it be compared.

  18. Anonymous users2024-01-19

    You see it in a second-hand store!

    If it is, it won't make a difference, and if it doesn't, it's a fool.

  19. Anonymous users2024-01-18

    Is the Barton 2200+ available?

    The CPU of the Barton core is also 2500+!

Related questions
25 answers2024-02-09

Carry forward the spirit of DIY and change the D shell. Or add a rivet or something like it yourself and actively jam the docking station.

30 answers2024-02-09

250W, it was already 220W in May last year.

9 answers2024-02-09

The resistance of the household 220V socket can be measured, and the resistance is normal to 0 because the conductive part of the socket is generally made of copper, and the length is short, so the resistance is very small, but there are many shoddy modern products, and there may be sockets with great resistance, so that it is easy to heat up when used, and even lead to fire, so it is necessary to measure. >>>More

5 answers2024-02-09

1 This phone doesn't have a flash 200W pixels are a bit rubbish. >>>More

6 answers2024-02-09

Hey. Users themselves can't turn! If you want to transfer, you can only transfer it by the manufacturer. >>>More