Portable hard disks are recognized as local disks

If you only need to use the mobile hard disk, you can directly format the mobile hard disk to try, if you need to save the data inside, then it is recommended not to format the mobile hard disk, the mobile hard disk can not be opened and needs to be formatted, because the file system structure is damaged, there is poisoning or forced to pull out the mobile hard disk may cause this symptom, because most of this problem is a "soft failure", you can use the recovery software to scan and try or find someone to recover remotely.

As far as the description and content, portable hard drive.

Driver issues. in Device Manager.

Inside, find the cleaner mobile hard disk, right-click to uninstall the device, and then reinsert the mobile hard disk, and it will be recognized.

Answer: Sweet potato only.

The solution to the problem of the portable hard drive not being recognized is as follows:Operating environment: Lenovo Legion Y7000, Windows10 system, etc.

1. First, right-click on the computer desktop and open "Manage".

2. Then go to "Disk Management" on the left.

3. Then right-click the disk under "Disk 1" and click "Change Drive Letter and Path".

4. Then "change the drive letter and path" in it, and "add" one if there is no ready-made one.

5. After the setting is completed, click "OK" to display the mobile hard disk.

Portable hard drive unreadable Centralized repair scenarios that are not recognized.

The disk or circuit board is broken, you can turn but the system can't recognize it, you remove it and go to their seller to repair it, look at the motherboard BOIS before dismantling it to see if the master and slave disk may be the motherboard's battery is out of power and can't remember the original settings.

1TB if you have a hard disk in Disk Management.

It should be that the partition table is broken, and you can continue to use the 120g by re-dividing the area, and there are two chances that are relatively large, partition loss and hard disk enclosure damage, what's the problem, you can hi me.

1T is a desktop hard drive, right? Take it apart and try it directly on the computer, this hard drive is a bit like a partition table mess.

120g is a laptop hard drive with a shell, right? You can try to change the hard disk case, this hard disk may be burned out.

It is recommended to disassemble the mobile hard disk box and connect it to the disk to try, or replace a mobile hard disk box and data cable to try, if you rule out the problem of the mobile hard disk box, it may be a disk failure, and it may be a bad sector failure, then you should stop continuing to power on the attempt, if the hard disk is still under warranty, go to the warranty, if the data is important, find 51recovery, if the warranty period is exceeded, and the data is not important, you can use MHDD to detect the bad sector, but to do the slave disk, operate under DOS, The red and green blocks that are swept out, the MHDD also comes with a repair function, but it is not recommended to save important data on this hard disk in the future.

You may be using PQ for partitioning, please try the following method instead.

In the DOS Toolbox in the Ghost system disk of Rainforest Woodwind, enter the command under dos: spfdisk enter (this is the command for disk management).

Try the tools again. :p Hard drive splitting tool.

There is an option ...... on my computer's right-click properties hardwareI forgot what it was, but there's probably a setting in there that you can try a few more times......

Sometimes it's a problem with the data cable, try a different cable.

Check if the card is broken and if the plugin is intact.