There are several types of fuel additives, and what is the role of fuel additives?

According to the composition of fuel system additives and the different functions produced in the engine, they can be divided into three categories: first, cleaning fuel additives; the second is clean fuel additives; The third is oil combustion and lifting additives.

1.The main function of cleaning additives is to increase the octane number of part of the fuel to achieve the effect of increasing the spontaneous ignition point, to avoid the occurrence of adverse factors such as detonation, but this kind of additives are not recommended for long-term use, the metal content is relatively high, and the long-term will lead to an exception to the increase of engine gum and carbon deposits. It can be used in small quantities in areas with low oil quality to improve oil quality, but for long-term use, it must be used in conjunction with cleaning additives.

2.The main role of clean fuel additives is to clean the entire oil circuit, remove moisture, dissolve magazines, remove gum, and even clean carbon deposits in fittings such as fuel injectors and spark plugs. The high-efficiency type can also have a certain carbon deposition dissolution effect on the three-way catalysis, and it can be used once every fixed kilometer, and the long-term use can make the vehicle condition reach a very good state.

The addition of lifting agent to Siyoupu fuel has the function of cleaning and cleaning two-way maintenance, and has a role in both methanol and ethanol gasoline.

3.The oil combustion improvement type is basically used in modified vehicles and racing cars, which greatly increases the octane number of fuel and forces the ultra-high compression ratio of the engine to meet the requirements. It must not be used for a long time. It will produce a large amount of carbon deposits, which is completely unsuitable for civilian vehicles.

Having said the above things, everyone must know a definite answer, what kind of additives should be used for their own cars, according to the logic of the use of regions, additives combined with China's own oil characteristics are the most suitable for our Chinese car owners. The 8-year research of the Peking University professor team is the only one that can play a very prominent role in the above three fuels for the fuel addition and improvement of ordinary fuel oil, ethanol fuel and diesel fuel in China.

It is mainly divided into clean type and increase octane number type, Swedish technology research and development of a fuel additive, oil Lejia, is a composite type, can not increase the octane number, but to remove carbon deposits, inhibit carbon regeneration, reduce fuel consumption, improve the power effect is relatively good, personally tested, it is divided into gasoline additives, diesel additives, belongs to the comprehensive fuel additives. Unlike other fuel additives, it is biodegradable, non-corrosive, and can decompose fossil and biofuel molecular chains.

Olejia pure plant fuel additives can decompose large oil droplets into small oil droplets, expand the oxidation area of fuel molecules, make fuel fully combusted, reduce carbon deposits, obtain more energy, reduce fuel consumption, and improve power.

The fuel fuel is ignited 20% earlier than ordinary fuel, which can reduce particulate matter emissions by 50%-70%, reduce carbon monoxide emissions by 30-50%, reduce carbon dioxide emissions by 6-12%, improve the quality of air purification, and reduce the formation of harmful deposits in the combustion chamber, thereby further reducing carbon oxide emissions.

It can effectively reduce fuel consumption by 6-12%, improve fuel efficiency, and save fuel costs.

Improve the power performance of the engine at least.

Cleaning the engine, reducing vehicle maintenance costs and maintaining the engine.

Do fuel additives work.

The gasoline additives currently on the market can be broadly divided into four categories:

1.Clean: When the vehicle clearly feels that the fuel supply is not smooth, the carbon deposits in the valve and fuel injector areas are serious, this fuel additive can be appropriately selected.

2.Curing type: The main function of this additive is to inhibit the generation of carbon deposits and ensure the normal operation of valves and fuel injectors.

3.Octane number adjustment: Octane number refers to the knock resistance index of fuel, for example, the octane number of No. 92 gasoline is 92; This fuel additive is mainly used to improve the octane of fuel to a certain extent, improve the quality of oil products, and can play a role in energy saving and emission reduction.

4.Comprehensive type: This additive is a combination of the characteristics of the above three products, and is a relatively advanced fuel additive, such as PNF stock solution.

To sum up, fuel additives do have a role, that is, people take supplements for the same reason, and the effect can be seen after a long time of use instead of two times. Therefore, it is recommended that if you want to use fuel additives, you should insist on long-term use, which is good for reducing the formation of carbon deposits in vehicles.

At present, the fuel additives in the market can be roughly divided into three types: clean, maintenance and power lifting. And different types target different aspects.

Clean type: the dosage of additives is large (200ml-400ml), the concentration in gasoline is high, the cost is high, usually more than 100 yuan, the cleaning effect is strong, the effect is fast, and the product with good effect only needs one bottle to completely remove the carbon deposits in the fuel system (fuel injector, combustion chamber, etc.), and only needs to be used in stages.

Curing type: the dosage of additives is relatively small, (20-100ml), mainly to inhibit the sediment generated by the fuel intake system of the automobile engine, the cleanliness is small, but the protection is good.

Power lifting type: increase octane number combustion, increase the power of the car, but it is not recommended for long-term use, because this product contains MMT (manganese) metal compounds, burned metal particles, will stick to the spark plug and three-way catalysis, over time will reduce their service life, early replacement.

What are the stock solutions of fuel additives, we briefly describe the characteristics of methanol as a fuel additive stock solution and the characteristics of PNF stock solution today.

Gasoline additives are roughly divided into several categories, one is chemical blending additives, the other is oil-based products, the base oil is added with certain polymers to make a mixed product, and the base oil can be divided into petroleum base oil and biological base oil. Most of these additives can decompose carbon deposits and gum in the oil circuit, improve the quality of gasoline, achieve full combustion, enhance power and reduce fuel consumption.

However, chemicals can erode the rubber ring while cleaning, resulting in a poor seal. The petroleum-based oil is light fraction oil, which has a low ignition point and low safety; Bio-based is made of modified vegetable oil as the base oil, which is safer, and better improves the lubrication and anti-corrosion performance of gasoline, so at present, bio-based gasoline additives are better.

1. It is used to remove carbon deposits and clean the fuel system.

2. Enhance the power performance of fuel.

3. Improve atomization and save fuel.

4. It can achieve the effect of anti-corrosion and anti-rust, and can play a good role in lubrication, which can effectively protect the engine.

5. It can reduce noise, reduce the wear of impurities to the engine, and achieve the purpose of prolonging the life of the engine.

6. It can eliminate black smoke and reduce emissions.

Oil-circuit wizards.

A course of 5 sticks is used to completely remove carbon deposits.

Product Features: Reduces friction, extends engine life, and keeps the engine running smoother.

Helps reduce oil consumption and engine leaks.

Keep gaskets and oil seals soft for longer oil life.

Eliminates adhesive residue in the engine and is not prone to sludge after long-term use.

Enables better compression and vacuum in the engine compartment.

The oil road elves are members of the BOD family. Its main components are metal-free polymer ashless surfactants and nano factors, and its main function is to add to vehicle fuel, which can significantly improve engine conditions and clean the deposits that have been generated in the engine fuel intake system. To achieve the purpose of fuel saving and consumption reduction to the greatest extent.

Keep the fuel highly clean. It is known as the "oil circuit wizard of automobiles".

The main components of the oil circuit wizard are polymer ashless surfactants and nano factors. This polymer surfactant dissolved in automobile fuel can disintegrate and fall off the carbon deposits deposited on the metal surface by virtue of its strong adsorption, wetting, solubilization and dispersion functions, and disperse and wrap them into fine carbon micelles. These oil-soluble fine carbon micelles enter the combustion chamber with the fresh gas mixture, and some of the carbon deposits that cannot be burned are discharged into the atmosphere with the exhaust gases.

In the process of driving the car, the vehicle gasoline containing the oil circuit spirit enters the fuel intake system of the car, which can be automatically cleaned, and the sediment is gradually cleaned off, so that the fuel injector is kept in a good spray state, the fuel is fully combusted, and the thermal efficiency is improved, so as to achieve the purpose of fuel saving. However, for new cars, the fuel road wizard can keep the fuel intake system smooth and clean, so that the fuel consumption of the new car can be kept at an optimal level.

How to use:1Gasoline and diesel are universal.

3.One cycle of continuous use (5 bottles) completely improves the fuel system, and then it is added every 3,000 km.

The use of fuel additives should pay special attention to the capacity of the bottle and the corresponding value of the fuel tank.

Many additives have a capacity of less than 300ml, but to mix 60L of gasoline, this is obviously not enough. In particular, those additives with only 100ml in a bottle cannot meet the needs of a tank of gasoline, and the cleaning effect cannot be achieved. Cleaning Effect = Solution Density * Cleaning Time Doubling any one of these factors will double the cleaning effect, but doubling both at the same time will increase the cleaning effect by quadruple.

It can be seen that many bottles have long necks, but in fact, the real capacity is not as high as the bottle at the bottom. The long neck is meant to facilitate the introduction of the fuel tank rather than to store the solution. The company has a fuel additive that really exceeds the requirements of the 250ml standard, and the high efficiency does not hurt the car.

The role of lead fuel additives is mainly to improve the knock resistance of oil, but because the addition of lead will cause pollution to the environment, the state has banned the use.

At present, most of the additives in the domestic market are cleaning agents, mainly to clean carbon deposits and gum and other stolen goods in the car, to maintain a clean environment in the car, the effect is still good, but the fuel saving rate is relatively low, about 2%, it is difficult to perceive.

Alexandra nano fuel synergist is the latest generation of fuel additives, which is through the principle of micro-explosion, the fuel is atomized twice, so that the fuel and air contact is more sufficient, and the combustion is more thorough, so it has a higher fuel saving rate, and can improve the power of the car, reduce exhaust emissions; The micro-explosion effect can also remove carbon deposits in the engine, and complete combustion can prevent new carbon deposits, so that the engine always works in a clean and ideal environment, which can prolong the service life of the engine. This is a multi-functional fuel additive, and it is a physical additive, which does not cause any damage to the car, so it can be used with confidence.

How much do you know about the main role of fuel additives?

Many car owners understand the importance of a comprehensive and overall cleaning of the oil circuit, which is to remove water, remove gum, and dissolve carbon deposits.

However, the oil circuit cleaner that car owners buy is not necessarily able to remove water and dissolve carbon deposits. Many so-called oil circuit cleaners do not have the function of removing water at all, and can only disintegrate carbon deposits in a large area, but cannot dissolve carbon deposits, resulting in ternary blockage.

The well-known additives brands in China include 3M Yueneng Meishi.

Fuel additives will distinguish different functional products, mainly divided into gasoline detergent (cleaning effect) and cleaning additives (cleaning effect). B1011 gasoline detergent is a terminal amino polyether gasoline detergent, which has excellent cleaning, dispersion, demulsification, corrosion inhibition and antioxidant properties, and can improve the cleaning and dispersion of vehicle gasoline when added to the fuel tank in proportionInhibitionFormation of deposits in injectors, intake valves, and combustion chambers. F9322 Fuel System Cleaning Additive is availableCleans effectivelyDeposits from the intake valves and fuel injectors can also be significantly removed from the combustion chamber.

The role of Weihuan brand fuel additives:

Removal of carbon deposits: After 3,000 kilometers of driving, more than 90% of carbon deposits can be removed, reducing vehicle maintenance costs and extending the life cycle of the engine;

Reduce emissions: reduce vehicle exhaust HC, CO, NOx pollutant emissions by 40%-65%;

Fuel saving: reduce fuel consumption by more than 5%, and save fuel by more than 10% after driving 3,000 kilometers;

Enhance power: Effectively enhance the power performance of the engine, and the speed is obvious.

The function of fuel addition is to mix in the fuel, and when the fuel is burned into the cylinder, it dissolves the piston rings and carbon deposits on the valves. In order to achieve the effect of cleaning. It is recommended not to use it, after using it, you will find that the engine is louder than without overtime.

What are the current types of fuel additives? Fuel additives are currently divided into gasoline additives and diesel additives in terms of use objects. Functionally, it is generally divided into three categories: cleaning type, maintenance type, and power lifting type.

Both the cleaning and maintenance chemical components contain cleaning factors, which can effectively clean or inhibit the generation of carbon deposits in the engine, and the additives are divided into four generations according to different chemical compositions.

The power lift type generally contains metal components, such as MMT (manganese) and other metal compounds, which can solve the problems of insufficient power and failure caused by fuel quality of the vehicle.

According to different use needs, gasoline additives are generally classified into three categories: clean type, maintenance type, and power improvement type.

Clean type: the dosage of additives is large (200ml-400ml), the concentration in gasoline is high, the cost is high, usually more than 100 yuan, the cleaning effect is strong, the effect is fast, and the product with good effect only needs one bottle to completely remove the carbon deposits in the fuel system (fuel injector, combustion chamber, etc.), and only needs to be used in stages.

The mainstream multi-point EFI (manifold injection) models are mostly located in the fuel injector, intake valve and intake manifold in the low temperature area of the fuel system, and the chemical composition of PIBA (polyisobutenemine) additives can solve the carbon deposition problem;

The new direct injection (GDI) models are located at the top of the fuel injector, combustion chamber and piston in the high-temperature area of the fuel system, and the chemical composition of PEA (polyetheramine) additives can solve the carbon deposit problem.

Curing additives with a small dose (50ml-100ml), also known as gasoline detergent "GB19592-2004", the fuel treasure sold at the gas station is such a product, low concentration in gasoline, low cost, usually within 30 yuan, need to be used continuously for a long time. It can better suppress the deposits generated by the fuel intake system of the automobile engine. Its cleaning effect is significant but the cleaning effect is weak, and it is mostly suitable for multi-point EFI (manifold injection) models with the largest number of holdings in the market.

Octane number adjustment can be understood as a power improvement type, which can turn 92 gasoline into 95 gasoline, but it is not recommended to use it for a long time, because this product contains MMT (manganese) metal compounds, and the burned metal particles will stick to the spark plug and three-way catalysis, which will reduce their service life and replace them in advance over time.

It's not that it can't be used, driving a vehicle or going to a remote mountainous area, you can also bring two bottles to solve the problem of poor local oil quality.

It can also effectively make up for the power attenuation and calorific value caused by ethanol gasoline.

Photo by Zhu Zhenchang) @2019