Help me see if the 5 capacitor E5200 is suitable with this board

If you talk about cost performance and want to overclock, then choose Jetwave Blu-ray P43 or Spartak BI520

These 2 boards are 399 yuan, and I personally use BI520

At present, it is super to stable operation.

E5200 with HD4850, it is recommended to change HD3870 or change E8400 to the silent electricity can not be on 4G, good physique plus some voltage is about the same. The Shuangmin board has not been used, but the specifications can also be all-solid, heat pipe, dual card, and 6-phase power supply. The support does not support memory asynchronous, just call the customer service ** and you will know!

See diagram below. It's circled in red for you. Take him off and see what kind of person you are.

Spank your first-grade teacher's ass and teach you to count.

In the middle of the CPU-facing side, the capacitors are lined up.

This ** is the E5200 5 capacitor version, and the one in a row of 5 is the capacitor.

Intel's can be seen when you turn it over, and AMD's has to be uncovered to see it. The silver one is it.

Yes? What to say? I don't understand.

Found the capacitor on the CPU?

Did you find the screws?

The ones next to the CPU are all there, and the ones that are too far away are not

Take out the CPU and look at the bottom row on the back with five large capacitors.

Copy to, don't scold me!

Of course, the 5 capacitors are good 5 capacitors are eliminated from the poor physique in the E8200 But the power-on can generally be overtaken back, which one do you say?

The E5200 is generally 2 capacitors, and a very small part is 5 capacitors. Like the motherboard, the 5 capacitor is better than the 2 capacitor, and I heard that the 5 capacitor can be overclocked to above. But it's hard to buy.

There are indeed capacitors on the CPU, you can see if you look closely, they are very small, and their frequency is fixed by Microsoft, so they are all called E5200It is said that 5 capacitors are sold by CPU frequency reduction with slightly worse high-frequency physique, so there is a lot of overclocking potential, and it is better to overclock than 2 capacitors, and for users who do not overclock, they are no different. Their motherboards are the same, and there is no difference in their installation specifications, as shown in the picture.

The performance is the same, overclocking to the same amplitude, and the performance should be the same.

However, there should have been a batch of 5 capacitors, which are extremely easy to overclock, and can be overclocked to a very high extent without adding voltage.

It is not comparable to 2 capacitors, so that 5 capacitors U is mythologized.

This is actually very simple, just look at the reverse side of the E5200, which is the middle of the side with the pins!

2 squares are 2 capacitors.

5 squares is 5 capacitors.

ASUS's overclocking BIOS manual is very detailed, too long I won't say, just tell you the idea of overclocking.

e5200 external frequency 200, the frequency doubling is, so it is 200*, the general overclocking is the frequency doubling keep, and then increase the external frequency, for example, the external frequency to 333 is 333*. After the external frequency increases, the voltage of the CPU can be added if the machine cannot be turned on, which can generally reach the E5200 of the capacitor. When overclocking, the out-of-frequency ratio of memory can be maintained at 1:

1.The other is to increase the frequency doubling and reduce the external frequency, for example, I overtook the e5200 to 380*.

In short, you need to keep trying various parameters, and it is best to take a pen to record the various permutations and combinations you have tried.

5 capacitors are basic, and 4G is passing.

Mine is also 5 capacitors, 4G can only go through 30 minutes of OR (memory instability), and finally stabilized.

I wish you the courage to enjoy the fun of 4G as well.

At least it can be overclocked My motherboard is JetWave's P45 Silent electric stability overclocking There is a fool-like overclocking method It's very simple to open the BIOS Look inside There is the word 200 If you find it, modify 200 to 233 and then press F10 Save and restart See if the frequency has changed If there is, it proves successful ! And then little by little to add up as for the frequency doubling and voltage, it must be around the word 200! Easy to find out!