So what do you mean is that as long as there is a leakage protection switch on the wiring at home, t

It's not that there is leakage to be safe, and now water heaters are generally three-pin ones, one of which is a ground wire, which can also be protected when there is a short circuit or overload. One is the neutral line, the other is the live wire, the neutral line and the live wire produce a voltage drop, there is electricity, the water heater can work, when there is leakage, the zero sequence coil in the leakage protector will generate a current, and the driving mechanism will disconnect the switch. Thus protecting the human body.

Fire, ground, zero have the best and safest, at least there must be a fire wire and a neutral line are relatively safe, only the fire wire and the ground wire, not very safe, there is a fire wire in the light, danger, there is a ground wire in the light, there is no electricity. Light has a zero line, it's useless.

Theoretically safe, if the leakage switch fails or is damaged, there will be a risk of electric shock when leaking.

It is best to connect the shell of the electric water heater to the ground wire, the leakage switch is broken, and the leakage can also play a protective role, so we often say that the ground wire is also called the lifeline.

When turning on the machine, pay attention to the leakage detection self-test of the water heater. Of course, you don't have to check it every time. Random inspections are sufficient from time to time. Otherwise, it is easy to be damaged.

The socket used in the water heater should have a reliable protective grounding, and the new apartment should have a grounding. The old house should be added by itself.

There must be a leakage protection switch at the entrance line.

3 points to be safe***.

Says who? It is best to use a three-plug plug, with a landing line, it is definitely safer to add a leakage switch, and the two are basically foolproof when used together, safety lies in the fact that people should always be vigilant, rather than blindly relying on something, if that thing is broken or what's wrong, it hurts yourself.

It is best to use a leakage protection plug again.

No, the leakage protector on the plug of the electric water heater cannot be used as a switch, because this can easily lead to the failure of the leakage protector, so as not to protect the safety of life, because this is relatively very unsafe, when using the electric water heater, it is also necessary to operate in accordance with the correct method, which can prolong its service life.

Secondly, when heating, start washing when the heating indicator light is not off, which is fine, because the current water heaters are equipped with an electric wall function.

Although the volume of ordinary quick-heating electric water heater and dual-mode electric water heater is about the same, the internal structure is very different, and the quick-heating electric water heater is only smaller in volume and more powerful than the storage electric water heater, so the heating speed is indeed faster than that of the storage electric water heater.

However, it can not achieve instant heating in spring and autumn, and it needs to be preheated, that is, it needs to wait, while the dual-mode electric water heater can be used in the three seasons of spring, summer and autumn, and it can be heated when it is turned on.

The leakage protector of an electric water heater is usually not used as a switch. A leakage protector is a safety protection device used to detect and protect electrical equipment and personnel from leakage currents. When there is leakage of electrical equipment, the leakage protector can cut and destroy the power supply in time to prevent the leakage current from causing harm to people and property.

As a switch, the leakage protector is not convenient to control and operate.

Electric water heaters are usually equipped with on-off control devices, which can control the heating and stopping of the electric water heater by switching on and off. It is recommended that when using the electric water heater, it should be operated in accordance with the correct method in the instructions and filial piety notice, and ensure that it is safe to use. If you have any questions about the use and maintenance of your electric water heater, it is recommended that you consult a professional technician or customer service for inquiries.

The leakage protector of the electric water heater is a safety protection device, which is mainly used to detect whether there is leakage in the electrical equipment, and once the leakage is detected, the power supply will be automatically cut off to protect the person. Therefore, the leakage protector cannot be used as a switch, it can only be used as a safety protection device. If you need to turn on and off your Sakuraki water heater, you should use a special switchgear.

Summary. Pro: It is possible, because only the power is turned off, the part of the water heater is still electrified, and the plugs of the current water heater are all safety plugs with leakage protection function, and it is the most sensitive protection of 10 milliampere, a little leakage will trip, so there is no need to worry about leakage, if it is an old-fashioned or cheap water heater, there is no safety plug, and the household power supply should be installed with a leakage protector.

Pro: It is possible, because only the power is turned off, the hot water reputation racket is judged to be the positive part or live, the plugs of the current water heater are safety plugs with leakage protection function, and it is the most sensitive protection of 10 milliamperes, a little bit of repentance leakage will trip, so don't worry about leakage, if it is an old-fashioned or cheap water heater, there is no safety plug, the household power supply should be installed with leakage protector.

It is possible, because only the power is turned off, the part of the water heater is still cracked and the limbs are electrified, and the current water heater is a safety plug with leakage protection function, and it is the most sensitive protection of 10 milliampere, a little leakage will trip, so don't worry about leakage, if it is an old-fashioned or unbridled cheap water heater, there is no safety plug, and the household power supply should be installed with a leakage protector.

Electric water heater with leakage protection: Do not use an outlet with a switch. Switches are often switched and easily burned out or sintered the contacts of the switch, making the switch useless.

The switch only controls one line, and if the switch controls the zero line, it is easy to bring potential safety hazards. The water heater should be equipped with a special socket and plug, 250V 16A or more. Do not buy **.

Electric water heater leakage protection switch is a very important safety device, which can effectively prevent the occurrence of leakage accidents. Electric water heaters use electrical energy, and their internal circuit system must be isolated from the outside world, otherwise leakage will occur, which will cause safety accidents when the human body is in contact with water. Therefore, the leakage protection switch is the basic safety guarantee of the electric water heater.

The leakage protection switch can monitor the current and voltage, and automatically trip when the current or voltage exceeds the set value, cutting off the power supply of the mold, so as to protect the user's safety. Not only that, but it can also effectively prevent the occurrence of safety accidents such as fires.

In daily use, if the leakage protection switch of the electric water heater fails or is not maintained in time, the safety of the electric water heater will be greatly reduced, and even pose a threat to the life safety of the user. Therefore, it is recommended that when choosing an electric water heater, you should pay attention to buying products equipped with leakage protection switches, and regularly maintain or replace leakage protection switches.

In short, the leakage protection switch of electric water heater is a very useful safety device, which can effectively prevent the occurrence of leakage accidents and ensure the safety of users. Therefore, for any electric water heater, the installation of leakage protection switch is indispensable.

Leakage protection switches are useful. The water heater leakage protector is a kind of protector specially designed to prevent leakage accidents in the water heater, and has the function of leakage protection, so that Paib is not from the danger of electric shock to the user when the plexus leaks. If the water heater is not equipped with a leakage protector, it can be used after installation.

The leakage protector is in poor contact with the inferior socket, and it is recommended to replace the socket; If the power cord of the phase wire or the power cord of the socket is not properly connected, it is recommended to ask a professional electrician to overhaul it. The leakage protection plug is in poor contact with the inferior socket and overheats due to overheating, resulting in an automatic protection plug.

Electric water heater leakage protection switch is an electrical equipment used to protect the safety of the human body, when the electric water heater leaks, it can quickly cut off the power supply to avoid electric shock to the human body. Therefore, the leakage protection switch of the electric water heater is very useful.

However, the leakage protection switch of electric water heater cannot completely prevent the occurrence of leakage. It can only detect leakage and cut off the power supply when it is found. If the electric water heater leakage shed with a protection switch is damaged or fails, it may not work properly.

Therefore, when using an electric water heater, you should also pay attention to check whether the leakage protection switch is normal and replace the damaged switch in time.

In a word, the electric water heater leakage protection switch is a very important safety protection device, which can effectively protect the human body from electric shock. However, when using the electric water heater, you should also pay attention to check whether the leakage protection switch is normal during the hail period, and replace the damaged switch in time.

It is external and located near the plug of the power cord.

The working principle of the water heater leakage protector is to connect the live wire and the neutral wire to the water heater through the leakage protector, so once the water heater leaks when the power is turned on, the water heater leakage protector will have a role, which will cut off the power supply in an instant, prevent the current from continuing to enter the water heater, and prevent the danger of electric shock.

The reset button on the leakage protector of the water heater is used to reset after automatic tripping when the line has leakage, so the T button is a detection switch used to check whether the leakage switch is working normally.