Do depression and anxiety have heart T wave changes

Not an organic lesion, no, if causing electrolyte imbalances would.

There is no fundamental change in the use of drugs to control the practice of drug recuperation.

I can tell you in detail about judging by the points alone.

Understand your feelings. However, it is best to seek the help of some professionals, you can ask some professional consultants in your local area, or find a few books on Dangdang to refer to first, and see if it will also help.

I used to read a roll of lead books, okay, called "Out of the Storm of Anxiety", Douban score is also relatively high, it seems to be specifically written for phobias, anxiety, depression, loss and restlessness.

In my opinion, people were originally born on this earth with a pure and divine energy, but in the course of their lives, they were gradually polluted by the education of various fears, gradually forgetting the source of their own life energy, forgetting their inner voice, and becoming farther and farther away from the "true self". The energy of pure joy has become magnified and strengthened under the long-suppressed education and has become negative energy such as "fear, compulsion, anxiety, depression", etc., which slowly accumulate in our bodies and in our unconscious minds.

Deep down in the hearts of most of us, due to the irrational "fear" education and uneasy upbringing from childhood to adulthood, there is a mechanism buried deep in the heart, which only accepts the experiences (feelings) that the heart thinks are good and comfortable, and rejects the experiences that are considered ugly and painful by the perceptual process. Extreme states of mind caused by this mechanism, such as catastrophic thinking, obsessive-compulsive opposing ideas, fearful conditioning, suffering from gains and losses, rejection of suffering, etc. And in systematic spiritual healing, we have to prevent them from rising.

This is done not because they are bad, but because they are compulsory, because they take over our minds in their entirety, completely seize the attention of individual consciousness, they make individual thoughts spin in small circles, and let us wrap ourselves layer by layer, and the original "free heart" seems to be hypnotized by them, as if it is mischievous, so that we are forcibly separated from the vivid and lively present... Therefore, it is time for us to face them bravely, and it is time for our hearts to find backThe way to "home", and it is best to find it close to home. The heart is the main cause and forerunner of action; Act with a suppressed mind, and pain will follow, like a chariot following a horse; The phase is guided by a determined heart, and happiness will follow, like a shadow with the shape of the mu. Excerpt from Clinical Psychology Self-Help Enlightenment "Out of the Storm of Anxiety", spiritual repair is originally a process of re-learning and re-education.

Take it easy.

Depression and anxiety are caused by: insecurity, sensitivity, strong self-esteem, caring about other people's opinions, poor tolerance, a sense of distance from others, strong desire to control, will not communicate with others, depression, inferiority complex, cranky thoughts...Reason: It is a wrong psychological suggestion formed in the original family since childhood, always pessimistic, timid and afraid.

2. Skin care products suitable for dry sensitivity**

The following are several skin care products suitable for sensitivity**, I hope the landlord can make a reference, but you must choose carefully!

1. Olay Multi-Effect Repair Cream.

140 yuan (deep care for the skin from the stratum corneum).

2,drbrandt

Laser Light Bottle Soothing Emulsion (exclusive inflacin ingredient to reduce skin redness and discomfort).

3,kiehl’s

Tiger grass repair cream.

700 yuan (natural herbal extract, instant calming).

4, Li Defang.

Whitening anti-allergy rebuilding cream.

Soothes redness on sensitive skin).

5。German chamomile moisturizer for sensitive skin.

189 yuan. 6, Niostrostro.

Glycyrrhizic acid soothing cream.

220 yuan. 7. DHC Gentle Repair Essence 245 yuan (rich in ceramide with strong repair function).

8,jurlique

Ultra-sensitive moisturizing isolation lotion 538 yuan (so that sensitive skin is no longer afraid of external stimulation).

9, L'Oreal Awakening Cleansing Mousse (strong and sensitive period of imperfect stratum corneum) 100 yuan.

If the landlord does not have the financial ability to buy the above skin care products to care, then don't worry, there is a small way, you can try aloe vera gel or petroleum jelly to calm the red and itchy first aid**Oh!

3. Maintenance method for dry sensitivity:

1) Protection: Warm your hands to allow the lotion to be absorbed faster. Instant hydration with lotion or cream is the key, natural moisturizing factor (NMF) molecular nail (ceramide) and apply on both hands before applying, and then push the whole face away, using hand temperature to let the lotion or cream absorb into the skin faster!

2) Moisturizing: Spray wet compress with mineral water: People with dry and sensitive skin can try to dip a cotton pad into a mineral spray wet compress to relieve dry itching and redness!

3) Cleansing: Dry sensitive skin is more susceptible to irritation than other sensitive skin, so it's best to cleanse your skin with lukewarm water!

The correct cleaning steps are, cleansing, moisturizing, plus protection, just because of the time, I gave the opposite, sorry!

No. 45 steel is the name in GB, JIS is called: S45C, ASTM is called 1045, 080M46, DIN is called: C45

No. 45 steel is.

High-quality carbon structural steel.

The hardness is not high and easy to cut, and it is often used in molds to make templates, pins, guide pillars, etc., but it must be heat treated.

45 steel is widely used in machinery manufacturing, and this type of steel has good mechanical properties. But this is a medium carbon steel, the quenching performance is not good, 45 steel can be hardened to HRC42 46. Therefore, if you need surface hardness and want to give full play to the superior mechanical properties of 45 steel, you often carburize and quench the surface of 45 steel, so that you can get the required surface hardness.

After quenching, before tempering, the hardness greater than HRC55 (up to HRC62) is qualified.

The highest hardness for practical application is HRC55 (high-frequency quenched HRC58).

Do not use the heat treatment process of carburizing and quenching for steel.

The quenched and tempered parts have good comprehensive mechanical properties, and are widely used in various important structural parts, especially those connecting rods, bolts, gears and shafts that work under alternating loads. However, the surface hardness is low and not wear-resistant. Quenching and tempering surface quenching can be used to improve the surface hardness of parts.

Carburizing treatment is generally used for heavy-duty parts with surface wear resistance and core impact resistance, and its wear resistance is higher than that of quenched and tempered surface quenching. Its surface carbon content, the core is generally used in special cases. After heat treatment, the surface can obtain a high hardness (HRC58 62), with low core hardness and impact resistance.

If 45 steel is used for carburizing, hard and brittle martensite will appear in the core after quenching, and the advantages of carburizing treatment will be lost. At present, the carbon content of the materials using the carburizing process is not high, and the strength of the core can be very high, and it is rare to be used in applications. I've never seen an example, it's only introduced in textbooks.

The process of quenching and tempering high-frequency surface quenching can be adopted, and the wear resistance is slightly worse than that of carburizing.

The recommended heat treatment system for 45 steel specified in the GB T699-1999 standard is 850 normalizing, 840 quenching, and 600 tempering, and the performance achieved is 355MPa yield strength

There are two causes of gray hair: congenital and acquired.

There are several reasons for the day after tomorrow: nutritional deficiencies, chronic mental stress and lack of sunlight. Traditional Chinese medicine believes that white hair is caused by kidney yin deficiency, and the weakening of kidney function leads to the slowdown of the body's metabolic function, so the ** of white hair should be first.

Replenish the kidney yin and fundamentally regulate the treatment. In addition, some ** diseases such as vitiligo can also cause gray hair. Normal people generally start to grow gray hair at the age of 35, and if it appears early, it is best to go **.

It is difficult to treat gray hair caused by congenital heredity, but the gray hair produced by acquired causes can be improved after **.

Gray hair refers to the graying of all or part of the hair, which can be divided into two types: congenital and acquired. Congenital gray hair tends to have a family history, with localized gray hair being more common, mostly in the anterior hairline. There are two types of acquired gray hair: senile gray hair and juvenile gray hair.

Some are elderly and frail and have few gray hairs, and gray hair occurs in children and adolescents, and there is often a family history, except for the increase in gray hair, it does not affect physical health. Some gray hairs that occur suddenly during adolescence are related to nutritional disorders. Mental factors can influence the graying of hair.

Gray hair can be a symptom of certain diseases such as progeria, vitiligo, etc. There is currently no effective treatment for this disease**, and patients should be helped to treat the disease correctly and avoid stress and depression. Hair dye is a commonly used cosmetic product for people with gray hair, but it can cause hair dye dermatitis and should be used with caution.

T10 carbon tool steel, strength and wear resistance are higher than T8 and T9, but the hot hardness is low, the hardenability is not high, the quenching deformation is large, the grain is fine, it is not easy to overheat when quenching and heating, and can still maintain the fine grain structure; After quenching, there is undissolved excess carbide in the steel, so it has high wear resistance and is used to make tools with sharp edges and a little toughness. It is suitable for manufacturing various tools with poor cutting conditions, high wear resistance requirements, and is not subject to sudden and severe shock vibration and requires a certain toughness and sharp edge, and can also be used as wear-resistant parts that are not subject to large impact.

CR12 steel is a widely used cold work die steel, which has high strength, good hardenability and good wear resistance, but poor impact toughness. It is mainly used for cold stamping dies and punches, cold cutting scissors, drill bushings, gauges, wire drawing dies, embossing dies, thread rolling plates, drawing dies and thread rolling dies that bear small impact loads and require high wear resistance.

Spheroidization annealing and softening treatment, good cutting performance.

No. 45 steel is.

High-quality carbon structural steel.

The hardness is not high and easy to cut, and it is commonly used in molds.

No. 45 steel pipe.

Templates, pins, guide posts, etc., but subject to heat treatment.

No. 45 steel is quenched and before tempering, hardness greater than HRC55 (up to HRC62) is qualified, and the highest hardness for practical application is HRC55 (high-frequency quenching HRC58).

After quenching, before tempering, the hardness greater than HRC55 (up to HRC62) is qualified.

2.The highest hardness for practical application is HRC55 (high-frequency quenched HRC58).

No. 45 steel should not be subjected to the heat treatment process of carburizing and quenching.

The hardness of the quenching and tempering parts of the steel should reach HRC56 59, and the possibility of large cross-section is lower, but not lower than HRC48, otherwise, it means that the workpiece has not been completely quenched, and there may be soxenite or even ferrite structure in the structure, which is still retained in the matrix through tempering, and cannot achieve the purpose of quenching and tempering.

The high temperature tempering after quenching of the steel is usually 560 600 and the hardness requirement is HRC22 34. Because the purpose of quenching and tempering is to obtain comprehensive mechanical properties, the hardness range is relatively wide. However, if the drawing has hardness requirements, the tempering temperature should be adjusted according to the requirements of the drawings to ensure the hardness.

For example, some shaft parts require high strength and high hardness; However, some gears and shaft parts with keyways have to be milled and inserted after quenching and tempering, and the hardness requirements are lower. Regarding the tempering insulation time, depending on the hardness requirements and the size of the workpiece, we believe that the hardness after tempering depends on the tempering temperature, which has little to do with the tempering time, but it must be reversed, and the general tempering and holding time of the workpiece is always more than one hour.

A lot of people like you, it's not impossible to give birth at the age of forty, many celebrities are not born in their forties, but there are indeed some risks, this is a big deal, you'd better discuss it with your family before making a decision.

Of course, the younger the age, the greater the chance of childbearing, and from a physiological point of view, the best age for women to have children is between 20 and 25 years old. During this period, women are at their best in terms of fertility, and their bodies are fully mature and at their peak. Before the age of 20, the psychological impact of pregnancy is more obvious than physiology, and the fertility of women at the age of 30 began to decline, from the initial downward trend to the trend of 35 years old, after the age of 40, women's fertility has been significantly reduced, but at this time it is not equal to zero, think about the previous family to have several children, when the mother was more than 40 years old when the old age was born is very common.

So age is not an absolute issue, it is possible as long as you want to. One study showed that 75% of women over the age of 30 who wished to have children were pregnant within 1 year; By the age of 35, the figure had dropped to 66 percent; At the age of 40, the proportion is only 44%; And by the age of 45, pregnancy has become difficult.

Once upon a time, there was a frog who sat in a well and thought that the sky was so small, and we said that it had anxiety disorders, but in fact it did not know enough.

Antidepressant drugs can treat anxiety disorders, often better than diazepam, and diazepam drugs will be addictive if taken for a long time, while ** depression drugs will not. Generally, people with anxiety disorders are more or less depressed, so there is no problem with ** depression medications.