-
You can try some software on the Internet (like EasyRecovery or something) but remember not to put the software in an invisible partition or write anything into it! Otherwise, there is no way to recover! Try a few more software, if you really can't do it, go to a professional data recovery company!
-
This may be caused by hot plugging or virus reasons in the process of using the hard disk, or it may be that the files inside are hidden, it is recommended to disinfect first, and then use the hard disk repair tool to repair, it is really not possible to only format.
-
Your first step is to repartition, that is, to format, this is not poisoning, it is a misoperation; After the redistribution, find some recovery and restore software to recover it.,Tens of MB of a single file doesn't matter even if it's formatted.,As long as the number of formatting times is only one or two, it can still be restored.,If it's more than a few hundred MB, I think you should give up to recover the software mailbox to ask for it.。
-
Go to the explorer to find out if there is a drive letter, or go to the DOS environment to see if it is possible to reinstall the system.
-
There is a high probability of poisoning, so it can only be formatted.
-
If the file you want is not displayed, your file properties have been changed to "Protected System Files".
1. Find the problematic mobile hard disk in Windows Explorer, right-click and click Properties at the bottom.
2. Click Tools in the Properties window, and then click Start Check in the Error Check column.
3. Here you can start with a mouse click.
4. It will be displayed like this after the end, but it's not the same as the ** I posted, because my problem here has been solved.
5. Now the mobile hard disk can display the copied content normally.
-
Summary. Good evening, kiss, glad you asked. The files copied from the USB flash drive to the portable hard disk are missing, and the analysis fault and how to solve it are as follows: Analysis Cause: Situation.
1. The file is hidden: Check the properties of the USB flash drive in the computer, if there is data that occupies space, but the file is not displayed, then it is possible that the file is hidden. Circumstance.
2. File loss: There are many reasons for data loss, such as deletion, formatting, computer virus, and so on. If you find that a file is missing, stop writing immediately to avoid overwriting the lost data.
Situation 3: Physical damage to the USB flash drive: The USB flash drive has a physical fault, such as damage to the memory chip and the main controller.
Why are the files copied from the USB flash drive to the portable hard drive missing?
Good evening, kiss, glad you asked. The files copied from the USB flash drive to the portable hard disk are missing, and the analysis fault and how to solve it are as follows: Analysis Cause: Situation.
1. The file is hidden: Check the properties of the USB flash drive in the computer, if there is data that occupies space, but the file is not displayed, then it is possible that the file is hidden. Circumstance.
2. File loss: There are many reasons for data loss, such as deletion, formatting, computer viruses, etc. If you find that the file is missing, stop the slide writing operation immediately to avoid overwriting the lost data.
Situation 3: Physical damage to the USB flash drive: The USB flash drive has a physical fault, such as damage to the memory chip and the main controller.
Recovery Method: Show Hidden Files, Folders, and Drives Step 1: Connect the USB flash drive to the computer, then double-click the "This Computer" icon on the desktop of the large notice, and command to open File Explorer.
Step 2: Find the drive letter of the USB flash drive in File Explorer, and double-click the drive letter to open the USB flash drive. Step 3:
Click on the "View" tab on the menu bar and tick the "Hidden Items" option. If the files that disappeared from the USB flash drive are not hidden, then please refer to method 2 to retrieve the lost files; This tutorial uses the Windows 10 system, and other versions of the Windows system may be slightly different in terms of specific operation, but they are similar.
Special case of USB flash drive damage: The physical damage of the USB flash drive mainly refers to the fact that the USB flash drive has been unable to be inserted into the computer, or the computer has been unable to recognize the USB flash drive. If you are not filial piety, you can also find a professional to open the market, and you can also recover the data.
-
Many people buy a mobile hard disk and partition it one by one like a computer, but they often encounter the problem that the mobile hard disk cannot open the partition, so do you know what to do if the mobile hard disk cannot be partitioned? Here are some of the relevant information I have compiled about the non-partitioning of portable hard drives for your reference.
Solution to mobile hard drive not partitioning method 1:
1. Right-click "Computer" - "Management" - "Disk Management", and you can find all the partitions of your computer on the right window.
2. Right-click on the partition we want to merge, then select "Delete Logical Drive" in the pop-up window, and then select the "Yes" option in the pop-up warning window.
3. Then we will see that the partition we just deleted turns black.
4. Right-click on these black partitions, click New, customize your partition capacity, check "NTFS format" and "Quick format", and click Next to restore our original hard disk space.
Solution 2 of the mobile hard disk cannot be partitioned
Click Start--Run, or use the shortcut key win+r to bring up the running program, enter cmd, and press Enter. Enter the DOS interface.
In the DOS interface, enter chkdsk x: f (x is the drive letter in question) and press enter. Wait for the program to run the detection.
After the detection is completed, open my computer to check, whether the repair has been completed, are you successful? Haha, it's that simple. If it's still the same as before, you can restart the computer, and you generally don't need to restart it.
1.What to do if your laptop hard drive can't be partitioned.
2.What should I do if the portable hard drive is not displayed?
3.What's wrong with the portable hard drive not being able to read the data.
4.The portable hard drive does not recognize how to fix it.
5.What should I do if my computer doesn't recognize the portable hard drive?
-
<>2. Then click "Disk Management" under Storage on the left sidebar, as shown in the figure below.
3. Then select the mobile hard disk with the mouse, and right-click to select "Compress Volume", as shown in the figure below.
<>5. Then click the "Compress" button to start compressing the disk, and it will be displayed as "unallocated" space when it is finished, as shown in the figure below.
-
Hello, portable hard drive.
The partition cannot be deleted directly, the deleted disk letter is the assigned disk letter, and the partition data needs to be formatted. Deleted partition drive letters can be retrieved by using the following methods:
1) Right-click on My Computer and select Management, enter "Computer Management" and click "Disk Management". , you can see that there are no drives after the disk named "Other" in the disk list.
symbol, which is the partition from which the portable hard drive was deleted;
2) Right-click on the partition and select "Change Drive Letter and Path", click "Add", select the drive letter you want to assign in the pop-up dialog box, and click "OK".
3) At this time, the drive letter has appeared behind the "Other" disk in the disk list, open the "Computer" and find that the partition has been displayed in the disk list.
-
If you don't know how to create partitions with the partition software that comes with the system, then you can use a diskgenius partition software on the Internet, open the software, find your 1T automatic hard disk on the left side, click to check, and then right-click in the long box above, the first one is to create a new partition, create a logical partition under the extended disk partition, and finally click Save Changes in the upper left corner.
-
Don't you have a disk letter in this space of more than 900g? Try recreating a drive letter for this space without a drive letter.
-
Use a tool such as DiskGenius to find the recovery partition, never repartition, of course, if you don't want the data, just create a new partition.
-
<>2. Then click "Disk Management" under Storage on the left sidebar, as shown in the figure below.
3. Then select the mobile hard disk with the mouse, and right-click to select "Compress Volume", as shown in the figure below.
<>5. Then click the "Compress" button to start compressing the disk, and it will be displayed as "unallocated" space when it is finished, as shown in the figure below.
-
Try assigning a drive letter.
Right-click on the partition that doesn't have a drive letter. Select "Change drive letter and path", then select "Add" to assign a drive letter.
-
Two possibilities:
1. The hard disk has bad sectors, which is also the last thing you want to see, if so, you can use the bottom grid to make a bottom grid on the hard disk, but the time is slow. This method is suitable for hard drives that are out of warranty. Bottom grid.
2. There may be partition identification problems after replacing the computer, which can be set in the control panel in "Management Tools - Management Tools - Disk Management".
-
Right-click to rebuild the logical disk.
If it doesn't work, right-click to delete it, right-click to rebuild the logical partition and try it.
-
Excuse me, what is the capacity of your portable hard drive? My 80G and 160G two mobile hard disks are only divided into one area,Although it was also divided into many areas before,4 or even more,But I found that the more partitions,The slower the system identification,Even can not fully identify all partitions,And the transfer speed of different partitions is also quite slow,So it is recommended that the landlord can have a maximum of two partitions,Folder way to organize and move files is particularly fast,Unless the landlord 1 partition is the backup partition of another partition It is necessary to divide it into two areas。 For the landlord's problem, please press win+r, enter the disk manager, see how many areas the mobile hard disk has, even if he is not assigned a drive letter, here you can also right-click to open the partition.
If you don't have a drive letter assigned, you can assign it here. Thank you.
-
If the file is hidden by the advanced level, you can open it with Ultraiso or DiskGenius to see if it is hidden! If it's not hidden, maybe there is an error on the hard drive, then back up the important files and format the portable hard drive!
-
Summary. Hello dear, your answer is: several reasons:
1.The file size is larger than that of a portable hard drive. 2.
The format of the portable hard disk is FAT (32) and cannot accommodate files with a capacity of more than 4 GB. 3.The portable hard drive does not have a partition or the current partition is not compatible with the current system.
If you find that the first cause is the cause of the file cannot be copied, you can try to use a larger capacity external hard drive to accommodate the files to be copied. If you find that the second cause is the cause, you should use Disk Management to format the portable hard drive to NTFS format and then copy the files again, which usually solves the problem. If you find that it is caused by the third reason, you should take the portable hard drive to an Apple computer and format it as Exfat using Disk Utility, so that the portable hard drive can copy files on both Mac OS X and Windows systems.
It's just that the portable hard drive can't copy things into it.
Hello dear, your answer is: several reasons:1
The file size is larger than that of a portable hard drive. 2.The format of the portable hard disk is FAT (32) and cannot accommodate files with a capacity of more than 4 GB.
3.The portable hard drive does not have a partition or the current partition is not compatible with the current system. If you find that the files cannot be copied due to the first reason, you can try to use a larger capacity portable hard drive instead, so that it can accommodate the files to be copied.
If you find that the second cause is the cause, you should use Disk Management to format the portable hard drive to NTFS format and then copy the files again, as a section roll usually solves the problem. If you find that it is caused by the third reason, you should take the portable hard drive to a portable Apple computer and format it as ExFAT with Disk Utility, so that the portable hard drive can copy files on both Mac OS X and Windows systems.
Handling of bad sectors.
Repair or hide bad sectors of the hard drive after they are found to prevent them from spreading. >>>More
Run the diskgenius software (**The address is in the references), find your hard disk (pay attention to the hard disk model and capacity), right-click on it, select Search for lost partitions (rebuild partition table), and then you will find your previous partition, after the search is completed, right-click on the hard disk again, select Save Partition Table, and then open my computer, your previous partition should come out, and the data is the same as before, you can also use this software to partition, delete the original partition first, Then just create it, it's very simple. Good luck!
Right-click on my computer - management - disk management - after finding your drive letter, format it first, and then don't save files on it, and then use EasyRecovery for data recovery, remember to choose "formatted recovery", it's OK, after the file recovery is completed, use XP's built-in partition tool to partition it, just right-click on my computer--manage-disk management--After finding your drive letter, deal with it according to your actual situation, your situation should be right-click on the drive letter to choose a new partition or what, specific and forgotten, rest assured It won't break the disk.
Only use the SSD to connect it, enter the BIOS, set the hard disk mode to AHCI mode, and then set the U disk as the boot disk, so that you can use the U disk to boot, and you will recognize your SSD when you enter the PE system. This will allow you to do the partitioning operation.
What you said about hard disk and mobile box are actually the same thing, the hard disk box has anti-magnetic and shockproof function, it is a shell protection for mobile hard disk, the mobile disk can also be connected to the host without a box, plus the box of course has some protection for the disk, although the protection is also within a certain range, if you need to store more files, buy a mobile disk, such as a small number of 8G U disk can also be used, I now have an 8G U disk, use it to install the system, and there is an 80G WestJet mobile disk to store some ** and important documents. If you are buying a mobile disk with a relatively large capacity, it is recommended to divide the mobile disk into 2 areas and store different content files in different areas, so that in case of file loss or poisoning, it is convenient to recover.