Do you have any good advice on learning about servers and routers?

You buy a wireless card kit and you can learn router configuration, address filtering, network mapping, and wireless encryption all at once.

Then, you go and install Server Shared, IIS, and install SQL 2008 to be able to call the database.

Install a server version of the network antivirus software and configure it. You're basically getting started.

The best way to do this is to combine theory with practice, and if you have a router and server on hand, you can learn it quickly.

Another one must want to learn, continue to learn, these two things are updated quickly, and new technologies are changing every day.

Countless experiments, countless times of dealing with failures, progress must be fast.

I'm engaged in this.,University is about learning the Internet.,These things are taught in many books.,But let me tell you.,Basically, most of the things in the books are useless!! After learning about the Internet for four years, what I learned is better than taking a home router and playing for half a day; It's better to spend a few hours configuring a Cisco switch; It's not as good as the few hours when the server in the company is broken and repaired; It's better to look for a server setup on the Internet for half a day. In a word, undergraduates really don't know what they're teaching!!

Far from it! Anyway, it is practice that can truly master knowledge.

Practice brings true knowledge, and only in actual operation can we understand the knowledge in books.

Obviously, it is not set up, one is to confirm whether the router can access the public network, if you can't access the external network, first determine whether you dial up or fix the IP to access the Internet, if it is dial-up, please confirm that the account password is correct, fixed IP, you need to set the public gateway and DNS correctly. Second, if the router can access the external network, please set the internal network gateway and DNS, and start DHCP. Basically, OK.

If it doesn't work yet, just go up and slice your settings up.

First of all, you click Start --- connect to --- so connect Then right-click on the local connection --- properties in the general select the intetnet protocol (you have to pull down a little to see), click on the properties on the right, select all automatic, click OK, and try to see if you can use the network. If it still doesn't work, set a fixed IP address in the properties as described above, and generally set the IP address to IP:

The following 177 can be any value between 0 and 255, but the value that is not used by other computers in the local area network, if you wait for the setting to say that it conflicts with other computer addresses, then you need to change the value), subnet: default gateway: dns settings, then you search on the Internet, see what is in your local area.

DNS, if the router is really set up, you spell the gateway, and then spell the external network to see which link is wrong.

Once the router is set up, don't dial on the computer!

The server prompted in ** did not respond.

The gateway is the IP of the router access to the intranet port, web and ftp I don't know if you want to set up a web and ftp server, or ask how to set up the gateway to access the web and ftp server, if you want to access, the lan area network ip, subnet mask and gateway should be able to access normally if you are set correctly, and there is a very important setting is the dns address, if the setting is not right, you can't open the web page, hehe. If you want to set it up, you should search it on the Internet, there are a lot of articles.

I don't understand the meaning, the LAN server gateway should be the IP of the LAN port of the router, do you want to set up the intranet server as a web and FTP server? It can be achieved through the system's built-in IIS, and then the server-related ports are mapped out through the router, the default ports are 80 and 21, and the mapped public network ports can also be customized, provided that you have a fixed public IP address, if not, you have to use dynamic software such as peanut shells. If you want to make an FTP server, it is recommended to use server-u, which is simple and practical.

Yes, the IP, Web and FTP of the router are the same, as long as the computer is poor on the router's interface The gateway is the router's interface.

Read more about Huawei, ZTE, Bell, Cisco and other equipment product technical documents, which contain a lot of things such as data configuration and setting methods. Nowadays, many large companies generally have Huawei's equipment, and look a little more, such as Huawei's EPON equipment and switch configuration technical documents, which are very critical, and you can basically draw inferences from each other, the only difference is that the configuration commands of each manufacturer are different.

Personally, I think books are useless, you can directly view the technical documents, data parameters, and setting methods of each manufacturer's products, which are more practical, and you can sort them out first, and then you can use them immediately. Because in the end, all kinds of configuration management are related to the device.

1. If the computer in the LAN wants to use the automatic acquisition of IP address, then there must be a DHCP server in the LAN to provide IP address automatic distribution services, and a router with DHCP function can be used to serve as a switch, and enabling and disabling the DHCP server is the switch.

2. You are on a local area network, using a private IP address, and there is only one WAN IP address in the whole network, so regardless of whether the router is used as a DHCP server or not, you need the router to provide routing function and PAT function.

A router is a router, and a server is a computer, as long as you find a way to connect to the router so that the user can connect to the server. In addition, the intranet has relatively large requirements for network speed, so you can't just use a router, but also a switch. The intranet should be on Gigabit speed.

If you buy the product, we will give you a network solution.

Game servers generally use more network maintenance, and you also use more popular game server programs on the Internet, and the three-layer update is best and the speed is relatively fast.

A game server is primarily a place to store games, and the machines below are generally only equipped with one system. When someone plays a game, the game files are copied locally from the game server and then run.

Internet café routers and switches are generally used fool-type switches, or they are manageable, and they are generally set up ARP and ports to make access faster and prevent viruses and the like!

The first wireless router is set up.

3. Set the wireless signal encryption information in the wireless settings - wireless security settings. Record the SSID, channel, and encryption settings of the wireless router after it is set.

The second wireless router is set up.

Log in to the second wireless router that needs to be bridged.

In the network parameters - LAN port setting, change the IP address to be different from the first router (to prevent IP address conflicts), for example, save, the router will automatically restart.

Select the SSID number of the first router in the list of scanned signals, as shown in the figure below, and click "Connect".

Set the channel to be the same as the first router channel. At the same time, set the encryption information to be the same as the first router, and click "Save". As shown below:

Shut down the DHCP server. In the DHCP server, select Disable, save, and restart the router.

At this point, the first wireless router and the second wireless router have successfully established WDS.

You go in and see if the second router has WDS function and turn it on.

Study hard.,It's good to take a Cisco Huawei certification.,You can go to the Internet to search for network training.,If you're zero-based learners, it's best to find a few basic books to read and then study in depth.。

Network engineers who are professional, and those who are civilians can find some information on home router settings on the Internet, which is generally enough.

1. The router does not have the ** function, but you can use a workaround method to set **, 2. The router should have 4 LAN ports, first use a relatively short network cable to connect a LAN port with the WAN port together, 3. Then turn off the DHCP of the router, 4. Then set the IP of the LAN end of the router to the LAN IP of the LAN segment that is not the same as the IP in the community, 5. Finally, manually set up the computer and set the IP to the same network segment as the router. Set the gateway to the IP of the LAN side of the router, so that you can access the Internet. (Of course, this will include all people who can use this method to borrow your home route to access the Internet, in order to prevent others from borrowing, you can bind the MAC or set up a firewall in the route.) ）

Try this, open a blank web page on the computer and enter the IP address of the router, set it up in it, look for the encryption type, change it to open, and save the network settings and then open it, polar routing support**, your **server should be SSH**, you only need to use SSH account, you can use ** There are benefits, by using SSH, you can encrypt all the transmitted data, so that the "man-in-the-middle" attack method is impossible to achieve, It also prevents DNS and IP spoofing. An added benefit is that the transferred data is compressed, so it can be transferred faster.