The computer has a long sound and thirteen short lived alarms, and the screen does not display 5

Updated on number 2024-02-09
9 answers
  1. Anonymous users2024-02-05

    There is a good chance that your motherboard BIOS is broken.

  2. Anonymous users2024-02-04

    When the computer starts, the host computer emits one long and three short alarm sounds, and the monitor does not light up, which usually indicates a graphics card failure or a connection problem between the graphics card and the motherboard. Here are some suggested workarounds:

    Power Failure Check: Turn off the computer, unplug the power cord, and press the power button to discharge residual current to ensure safe operation.

    Check the graphics card connection: Open the computer case and check that the graphics card is properly installed in the PCI-E slot on the motherboard. If the graphics card is loose, reinsert and secure the graphics card.

    Clean up the dust: Use a soft brush or hair dryer to clean the dust from the graphics card and slots to ensure good contact.

    Reinstall the graphics card: Remove the graphics card and inspect its contact points for damage or contamination. If needed, you can use an eraser to gently wipe the contact points and then reinstall the graphics card.

    Check the monitor connection: Make sure that the cable between the monitor and the graphics card is properly connected and is not loose or damaged.

    Try a different monitor or graphics card: If possible, try connecting another monitor or using another graphics card to troubleshoot issues with the monitor or the display card itself.

    Check the power supply**: Make sure that the power cord of the graphics card is properly connected and that the power supply** is normal.

    Check the motherboard and memory: If none of the above methods can solve the problem, there may be a problem with the motherboard or internal memory. Try replacing the memory module or having the motherboard checked by a professional.

    When operating, ensure safety and avoid touching sensitive components. If you are not familiar with these operations, it is advisable to seek the help of a professional.

  3. Anonymous users2024-02-03

    award

    BIOS alarm tone: 1 long 3 short: Keyboard controller error. Check the motherboard.

    Amibios alarm tone: 1 long 3 short: memory error. If the memory is damaged, it can be replaced.

  4. Anonymous users2024-02-02

    Looking at the description below, your estimate is a motherboard issue!

    1 Short: The system starts normally. Shows that there is nothing wrong with the machine.

    2 Short: General error, please go to CMOS Setup and reset the incorrect options.

    1 long and 1 short: There is an error in the memory or motherboard. Try to change the memory, if it still doesn't work, you have to change the motherboard.

    1 long and 2 short: The display or graphics card is wrong.

    1 long and 3 short: The keyboard controller is wrong. Check the motherboard.

    1 Long 9 Short: Motherboard Flash RAM or EPROM error, BIOS corruption. Try a different block of flash ram.

    Constant ringing (long sound): The memory module is not plugged in tightly or is damaged. Reinsert the memory module, or replace the memory.

    ami bios

    1 Short: The memory refresh failed. Replace the memory module.

    2 Short: The memory ECC verification error is incorrect. Setting the memory option for ECC check to Disabled in CMOS Setup will solve the problem, but the most fundamental solution is to replace a memory.

    3 Short: The basic memory check of the system fails. Change memory.

    4 Short: The system clock is wrong.

    5 Short: There is an error in the CPU.

    6 Short: Keyboard controller error.

    7 short: The real mode of the system is wrong and cannot be switched to protection mode.

    8 Short: A memory error is displayed. If there is a problem with the display memory, try changing the graphics card.

    9 Short: BIOS chip check and error.

    1 long and 3 short: memory error. If the memory is damaged, it can be replaced.

    1 long and 8 short: A test error is displayed. The monitor cable is not plugged in properly or the graphics card is not plugged in properly.

    phoenix bios

    1 Short: The system starts up normally.

    1 short, 1 short, 1 short: The system initialization failed.

    1 Short 1 Short 2 Short: Motherboard error.

    1 short 1 short 3 short: CMOS or battery failure.

    1 Short, 1 Short, 4 Short: ROM BIOS verification error.

    1 Short, 2 Short, 1 Short: The system clock is incorrect.

    3 Short 2 Short 4 Short: Keyboard controller error.

    3 Short 3 Short 4 Short: A memory error is displayed.

    3 Short 4 Short 2 Short: Error is displayed.

    4 Short, 2 Short, 1 Short: Clock error.

    4 Short 2 Short 2 Short: Shutdown error.

    4 Short, 3 Short, 1 Short: Memory error.

    4 short, 4 short, 1 short: The serial port is wrong.

    4 short, 4 short, 2 short: the parallel port is wrong.

    Comparison table of the meaning of the old Award BIOS alarm sound and fault.

    A short system boots normally.

    2. The short CMOS setting is incorrect, and it must be set again.

    1 long and 1 short memory or main version error, change memory or master version.

    1. The long and 2 short monitors or graphics card are wrong, and the display card may not be inserted properly.

    1 long 3 short keyboard controller error, master issue.

    1 long 9 short Flash RAM or EPROM error of master BIOS, serious master issue.

    Repeating short rings Power issues.

    The memory is not plugged in tightly or is corrupted.

  5. Anonymous users2024-02-01

    Generally, if there is an alarm sound when the boot is started, it is related to the memory, including memory and video memory.

  6. Anonymous users2024-01-31

    AMI's BIOS is set to 1 long and 3 short: memory error is generally this.

    The BIOS of the award is set as: 1 long and 3 short: The keyboard controller is wrong.

  7. Anonymous users2024-01-30

    The alarm sound of the BIOS, the specific forgot about it.

  8. Anonymous users2024-01-29

    See below.

    Description, your estimate is a motherboard problem!

    1 Short: The system starts normally. Shows that there is nothing wrong with the machine.

    2 Short: General error, please enter CMOS

    setup, resetting the incorrect option.

    1 long and 1 short: There is an error in the memory or motherboard. Try to change the memory, if it still doesn't work, you have to change the motherboard.

    1 long and 2 short: The display or graphics card is wrong.

    1 long and 3 short: The keyboard controller is wrong. Check the motherboard.

    1 long and 9 short: motherboard flash

    RAM or EPROM error, BIOS corruption. Try a different block of flash ram.

    Constant ringing (long sound): The memory module is not plugged in tightly or is damaged. Reinsert the memory module, or replace the memory.

    amibios

    1 Short: The memory refresh failed. Replace the memory module.

    2 Short: The memory ECC verification error is incorrect. in CMOS

    Setup can solve the problem by setting the memory to disabled for ECC checksum, but the most fundamental solution is to replace a memory.

    3 Short: The basic memory check of the system fails. Change memory.

    4 Short: The system clock is wrong.

    5 Short: There is an error in the CPU.

    6 Short: Keyboard controller error.

    7 short: The real mode of the system is wrong and cannot be switched to protection mode.

    8 Short: A memory error is displayed. If there is a problem with the display memory, try changing the graphics card.

    9 Short: BIOS chip check and error.

    1 long and 3 short: memory error. If the memory is damaged, it can be replaced.

    1 long and 8 short: A test error is displayed. The monitor cable is not plugged in properly or the graphics card is not plugged in properly.

    phoenix

    BIOS1 is short: The system boots up normally.

    1 short, 1 short, 1 short: The system initialization failed.

    1 Short 1 Short 2 Short: Motherboard error.

    1 short 1 short 3 short: CMOS or battery failure.

    1 Short 1 Short 4 Short: ROM

    BIOS verification error.

    1 Short, 2 Short, 1 Short: The system clock is incorrect.

    3 Short 2 Short 4 Short: Keyboard controller error.

    3 Short 3 Short 4 Short: A memory error is displayed.

    3 Short 4 Short 2 Short: Error is displayed.

    4 Short, 2 Short, 1 Short: Clock error.

    4 Short 2 Short 2 Short: Shutdown error.

    4 Short, 3 Short, 1 Short: Memory error.

    4 short, 4 short, 1 short: The serial port is wrong.

    4 short, 4 short, 2 short: the parallel port is wrong.

    Legacy award

    BIOS alarm sound and fault meaning comparison table.

    A short system boots normally.

    2. The short CMOS setting is incorrect, and it must be set again.

    1 long and 1 short memory or main version error, change memory or master version.

    1 long 2 short monitor or graphics card error, may display card is not plugged in 1 long 3 short keyboard controller error, master version problem.

    1 long and 9 short. Flash for the main BIOS

    RAM or EPROM errors, serious master issues.

    Repeat short rings. Power issues.

    The long ring continues. The memory is not plugged in tightly or is corrupted.

  9. Anonymous users2024-01-28

    Summary. Three short and one long is the BIOS alarm sound of the award. Main workaround:

    Unplug the memory module, plug it back in, and unplug the power cord and plug it back in. Clean the case dust, wipe the metal part of the memory module back and forth with an eraser, and plug it in. If the first two do not work, it proves that the memory module is damaged and needs to be replaced.

    The computer emits three short and one long alarm sounds.

    Hello, I am helping you to inquire about the relevant information and will reply to you immediately.

    The computer emits three short and one long alarm sounds, which should be a problem with the memory module.

    There is no memory module installed and it also alarms.

    You should just try a new memory module.

    If you don't have a memory module, of course, it will also call the police.

    Three short and one long is the BIOS alarm sound of the award. Main workaround: Unplug the memory module, plug it back in, unplug the power cord and plug it back in.

    Clean the case dust, wipe the metal part of the memory module back and forth with an eraser, and plug it in. If the first two do not work, it proves that the memory module is damaged and needs to be replaced.

    Changed or called the police.

    That's troublesome, maybe the motherboard is damaged.

    Hope it helps, thank you.

Related questions
14 answers2024-02-09

1 Short: The system starts normally. This is something we hear every day and it also shows that there is nothing wrong with the machine. >>>More

3 answers2024-02-09

1. AMI BOIS 1 Short Memory Refresh Failed 2 Short Memory ECC Check Error 3 Short System Basic Memory (1st 64K) Check Failed 4 Short System Clock Error 5 Short **Processor (CPU) Error 6 Short Keyboard Controller Error 7 Short System Real Mode Error, Can't Switch to Protected Mode 8 Short Show Memory Error (Showing Memory May Be Corrupted) 9 Short ROM Bois Check and Error 1 Long 3 Short Memory Error (Memory Corrupted, Please Replace) 1 Long 8 Short Display test errors (loose monitor data cable or unstable graphics card insertion). >>>More

12 answers2024-02-09

It should be judged by the sound of the alarm.

1. Short: Memory flush failed. >>>More

25 answers2024-02-09

You can try it with data recovery software, but if you don't write new data to your card after formatting, you can use "easyrecovery" to recover after formatting option.

20 answers2024-02-09

The most likely situation is that the hard disk has a bad sector, of course, there may be a problem with the power supply, change the power interface, change the data cable to try, if not, use the hard disk scanning tool to do a check.