High Score SOS How to get a laptop to go wireless via a desktop computer, how to set it up

Use a wireless land gamer, and then buy a junction box.

You can provide wireless network to the laptop at the same time.

I also gave two PCs a wired network.

Because many wireless land games are equipped with cat functions.

If you want a laptop to go online wirelessly, you generally need to use a wireless router. Of course, there is also a way to save a little, and that is to buy a wireless AP. Both of these are available on the Internet, and they came out as soon as I searched for them.

Buy a wireless router and build your own wireless network.

Method Steps:

1, Click the icon like "Signal" in the taskbar in the lower right corner to open the list of wireless wifi

2. Select the wireless network that needs to be connected, the wifi without a password can be connected normally, and if you set a wifi password, you need to enter the correct password to connect, <>

3. Enter your wireless wifi password, this must be correct before it can be used.

It should be reminded that it is important to confirm the security of wireless wifi to avoid computer poisoning or information theft.

4. Want to find computers, devices, and content on this web and automatically connect devices such as printers and TVs? One click is yes.

5. The connection is successful, and the wireless icon is connected, and you can access the Internet when you are connected.

This depends on your desktop.,Whether the computer has a wireless network function,

Usually in the process of using the computer, due to the limitation of physical reasons such as location and network cable, many desktops can not connect to the network cable, at this time, you can connect to the wireless network by installing a wireless network card on the desktop.

Computer: Huawei MateBook

System: Windows 10

Software: Wireless network card.

1. First of all, prepare a wireless network card device, similar to the shape of the U disk, plug it into the computer, and the driver will generally be installed by itself.

2. After installing the wireless network card driver, click the network icon in the lower right corner of the desktop.

3. In the pop-up window, click "Open Network and Sharing Center".

4. In the Network and Sharing Center, click "Change Device Settings".

5. Right-click "Wi-Fi Connection" in the network connection and click "Enable".

6. Go back to the desktop, click the wireless network signal icon in the lower right corner of the computer, and select your own wireless network connection to log in.

Hello, it is a pleasure to serve you and give you the following answers:1Steps to set up a wireless network connection on your desktop computer:

1) First, make sure that your desktop computer is equipped with a wireless network card, or you can install a wireless network card to support wireless network connection. (2) Secondly, install the corresponding drivers and software on your desktop computer to support wireless network connection. (3) Then, turn on the network connection on the desktop computer, click "Wired and Wi-Fi connection", then click "Wi-Fi connection", set the mode of Wi-Fi connection to "Auto-connect", and you can automatically connect to the wireless network and connect to the network.

4) Finally, click "View Available Wi-Fi", select the Wi-Fi you want to connect to according to the prompts, and then enter the correct Wi-Fi password, and you can successfully connect to the Wi-Fi. 2.If something goes wrong, it could be due to the following reasons:

1) There is no wireless network card installed on the desktop computer; (2) The desktop computer does not have the correct drivers and software installed; (3) The mode setting of the wireless network connection is incorrect; (4) The wireless network password entered is incorrect. 3.Workaround:

1) Make sure that the desktop computer hall is equipped with a wireless network card; (2) install the correct drivers and software to support wireless network connectivity; (3) Make sure that the mode of the wireless network connection is set correctly; (4) Enter the correct wireless network password.

1. Connect the network cable to the physical network card interface of the desktop computer, and connect the other end of the network cable to any port of the router.

2. Click the right mouse, select [Properties] from the pop-up menu on the [Online Neighbor] on the computer desktop

3. Right-click the [Local Connection] icon and select [Properties].

4. Select the [Properties] button in the pop-up dialog box.

5. Change the IP address to the network segment and click OK

6. Open the browser, enter it in the address, enter the correct [Username] and [Password], and click [OK].

7. [Setup Wizard] pops up, click [Next].

8. Select the first [AP] option and click [Next].

9. Select [WPA-PSK WPA2-PSK] below and enter the password, click [Next].

10. Click Restart

Ten. 1. Change the [Attributes] of the wireless connection to automatically obtain the IP address.

[This paragraph] wireless network card use.

A wireless network card alone cannot connect to a wireless network, and a wireless AP must also be used, which is equivalent to a hub for a wired network. The wireless network can only be connected if the wireless AP can be covered by the appropriate settings.

Wireless Internet access relies on wireless network cards, of course, supporting wireless routing (wireless cat).

The wireless network card is equivalent to the receiver, and the wireless router (wireless modem) is equivalent to the transmitter. In fact, it is still necessary to connect the wired Internet line to the wireless modem, and then convert the signal into a wireless signal and transmit it out, which is received by the wireless network card.

Generally, the wireless router can drag 2 4 wireless network cards, and the working distance is within 50 meters, and the communication quality is very poor. Strictly speaking, this wireless solution is just a wireless network, and the working environment must be next to the wired network.

A set is priced at 120,200.

The other is pure wireless, which requires communication equipment, such as satellite receivers, or mobile phones that can access the Internet, etc., these things are connected to the computer through a special data line, and they receive signals from satellite or wireless network services, but the speed is not very good, and the communication cost is super expensive. And the satellite receiver and mobile phone are also expensive, usually ranging from 650 to 2000, the advantage is that even if you are in the wilderness, you can also access the Internet (of course, you need a computer).

Both of these solutions can be used on laptops and desktops, of course, desktops are inconvenient to move in the first place, and wireless doesn't make much sense.

You first have 1 wireless network card, 2 wireless router, the specific steps are, first install the wireless network card driver, is the wireless network card comes with the CD, and then you need to use the network cable to connect the router to set the dial settings, and then turn on the network cable connection, and then set the password in the wireless network security settings, and then click on the wireless network connection icon (in the lower right corner) on the computer, click refresh, find your wireless network, click to connect, enter the password.

First of all, you have to have a wireless network card, which is sold everywhere, and then set it on the wireless network card according to the wireless router, such as IP and the like.

Desktop? Requires a wireless network card, hardware support is required.