How to remove the plastic steel window screen, how to remove the screen

The screens are drilled with an electric drill and then screwed up. If you want to disassemble it, you have to use a screwdriver.

In the case of plastic steel windows, if it is a sliding window, take off the sash, and the side should be able to be removed, which is pressed into the O-groove.

Here's how to remove the screen:

1. There are two ways to fix the general aluminum alloy screen on the window track, one is like the one in the figure below, which is on the inside of the track frame.

2. There is another kind, which is the one in the figure below, which falls directly on the outer frame of the track, so when you want to remove the screen, first see which way the screen frame is placed on the track.

3. But no matter how the screen is placed on the window track, if you want to remove it, it is generally by raising the screen frame to expose enough space below.

4. If the screen frame is on the outer frame of the track, then the screen frame can be removed directly outward; If it is on the inside of the track frame, the lower frame of the screen window is obviously blocked by the window track frame.

5. At this time, try to move the screen frame into the window track first, so that it crosses the first track on the window frame.

6. Then lift the other end of the screen window frame and let it slowly move out to the outside of the window track, so that when the lower frame of the screen is completely removed, the lifted screen frame can be put down, and then the top of the screen window is oblique, and the screen can be removed.

Pour baking soda into a watering can and add laundry detergent. Add an appropriate amount of warm water and shake well. Spray on dirty screens. The dust came down easily, wiped with a scouring pad, and it was as clean as new.

The glass sand is a bit troublesome when it comes from school, and there are screws that need to be cut with a screwdriver.

You can use auxiliary tools, such as screwdrivers.

Tools & Raw Materials:Slotted screwdriver, foam adhesive strip, pulley under aluminum alloy window, plastic steel screen.

Method:

1. First measure the size of the screen window, and keep the tape measure flush with the screen window.

2. Align the four corners, and knock the corners into the frame with the help of a hammer to achieve corner to corner to avoid dislocation and uneven screen windows.

3. Use a screwdriver to drill the screen window, and use a screwdriver to inlay the aluminum alloy edge strip into the corner.

4. Trim the screen window, and then reduce the excess screen.

Answer: First, take the angle of the gauze and lay it on the frame, and then press the gauze into the groove of the PVC plastic strip with the pressing magnetic strip, pay attention to pressing the yarn magnetic strip obliquely into the inner side of the PVC plastic strip when pressing the yarn, and then press the outer side;

2.Then the adhesive magnetic strip is adsorbed on the pressed magnetic strip, and the window frame is wiped clean, so that the adhesive magnetic strip can be better adsorbed on the window frame;

3.Then peel off the protective film at the top and stick it on the window frame at the top, fix the position, and then gradually tear off the protective film on the left, right and bottom.

I'm here to prevent rats.

I'm here to prevent rats.

This fear of stickiness is not good.

It's not good to ask this kind of question, which is afraid of stickiness.

This fear of stickiness is not good.

1. There are two ways to fix the general screen window frame on the window track, one is on the inside of the track outer frame. There is also a kind of which falls directly on the outer frame of the track cluster, so when you want to remove the screen window, first see which way the screen frame is placed on the track.

2. No matter how the screen frame is placed on the window track, if you want to remove it, it is generally infiltrated by raising the screen frame to expose enough space below.

3. If the screen frame is on the outer frame of the track, then the screen frame can be removed directly outward; If it is on the inside of the outer frame of the track, the lower frame of the screen window is obviously blocked by the outer frame of the window track, 4. At this time, try to move the screen frame to the window track first, so that it first crosses the first track on the window frame.

5. Lift the other end of the screen window frame again, and let it slowly move out to the outside of the window track, so that when the lower frame of the screen window is completely removed, the lifted screen frame can be put down, and then the top of the screen window is oblique, and the screen frame can be removed.