5 kW DC motor starting current how much is the operating current 30

The operating current starts at 5 to 7 times the operating current.

The starting current multiple of the three-phase cage motor is 6 7 times, and the starting current multiple of the winding motor is about many times.

i=p start-up current, iq=7*i=7*

The general starting current is 5 to 8 times that of the no-load current.

Operating current p=iu, i=5000 220=, starting current: 114 180 (a).

What is the starting current of a 5 kW DC motor.

The induced electromotive force generated by the rotation of the rotor of a DC motor in a magnetic field is the main force to resist the applied voltage, and since it is DC, the inductance is only useful at the moment of start-up, and the current does not change after start-up, and the inductance is useless. In addition, the coil resistance of DC motors is extremely small, almost negligible.

Because the motor has a power factor, it is generally around the right. With i=p (u*, and then calculate the error, it is this number, because in the power supply circuit of the DC motor, the starting current of the DC motor is very large (theoretically infinite), so a resistor is connected in series to reduce the starting current, so as to protect the power supply and the motor coil from the impact of the large current and damage, this resistance is figuratively called the current limiting resistance, so the specific calculation depends on the parameters of the motor.

In the case of 380V, the rated current is about 15A, the starting current is 4-7 times of the rated current, and the no-load current in normal use is about 30-50% of the rated current.

The no-load current is about 30-50% of the rated current. In engineering practice, the current of three-phase asynchronous motors below 45kw is generally close to such a formula: power px2 = rated current.

This is an approximate calculation. No-load currents generally do not need to be considered in engineering practice. Therefore, the rated current of the kilowatt motor is about 15A.

adverse effects. The starting current of the motor is 5 7 times of its rated current, although it is such a large starting current, but in the general situation because the starting time of the motor is not very long, the starting time of the motor is at most a few seconds to more than ten seconds, the large current that the motor flows in a short time, the temperature rise caused by the heating of the motor is not too high The motor is able to withstand it.

The starting flow is about 70 amperes, and the normal operation is about 15 amps.

Normal operation 15A starting current is 4-7 times that of 15A.

Summary. Your friends and friends, after our inquiry and research, we have sorted out the following for you: the rated current is about 15A under 380V, the starting current is 4-7 times of the rated current, and the no-load current in normal use is about 30-50% of the rated current.

What is the starting current of a kilowatt motor? What is the normal current?

Your friends and friends, through our inquiry and research, we will sort out the following for you: the rated current is about 15A under the condition of 380V, the starting current is 4-7 times the fixed current of the forehead banquet, and the normal use of the space-time auspicious load current is about 30-50% of the rated current.

In the Year of the Tiger, I wish you a lot of money, a fat tiger, a strong elephant tiger, a sweet love elephant milk tiger, a good luck elephant tiger hair, and a prosperous career like a big tiger!

The rated current is about 15A under the condition of 380V emotional barrier, the starting current is 4-7 times of the rated current, and the no-load current is about 30-50% of the rated current in normal use.

The no-load current is about 30-50% of the rated current. In engineering practice, the current of three-phase asynchronous motors below 45kW is generally close to such a formula: the power of the balance return px2 = rated current.

This is an approximate calculation. No-load currents generally do not need to be considered in engineering practice. Therefore, the rated current of the kilowatt motor is about 15A.

Adverse effects of Kai hunger.

The starting current of the motor is 5 7 times of its rated current, although it is such a large starting current, but in the general situation because the starting time of the motor is not very long, the starting time of the motor is at most a few seconds to more than ten seconds, the large current that the motor flows in a short time, the temperature rise caused by the heating of the motor is not too high The motor is able to withstand it.

The above content reference: Encyclopedia - Starting current.

The starting current of the motor is related to the weight of the load, and the general starting current is about 2 to 4 times of the rated current.

Summary. The instantaneous current at the start of the motor diameter is 5 7 times the rated current of the motor. The rated current of the 50 kW motor is about 100A, so the starting current is about 600A.

The diameter of the motor starts and the instantaneous current is 5 7 times the rated current of the motor. The rated current of the 50 kilowatt motor is about 100A, and the starting current is about 600A.

The rated current of the 3 kW motor is 5-7 times the rated starting current with load, that is, more than 82A.

Hope this answer is helpful to you.

<> kW motor current is 11A. Precautions when starting the motor: 1. When the motor is started, if there is fire or too much vibration, it should be stopped in time for inspection.

2. If it is found that the direction of rotation is reversed after starting, it should be stopped in time for inspection. 3. If the motor does not rotate after starting, it should be stopped immediately and restarted by replacing it with a three-phase power supply. 4. If the abnormal noise is too large after starting, stop the machine immediately and check whether the transmission device and fuse are damaged.

5. After the power is turned on, the ammeter of the motor should be observed at all times, and if it is found that the ammeter still does not return after a long time of operation, the motor should be turned off immediately to find out the reason and then start.

Hello:1, the rated current is about 8A.

2, The starting current is about 5 7 times of the rated currentMaximum instantaneous start-up currentIn: 8a 7 =56a 。

The formula for 4000 watts unidirectional current is ampere unidirectional circuit power is p=iu, which is equal to the line current, p is the load power, and u is the directional voltage is 220v