SIS 651 How to set 1680 1050 resolution

After installation, restart, there is a monitor icon on the system tray tray in the lower right corner, right-click - Display Settings - Settings, click Advanced Timing Options, click Custom Resolution, find it on the left side.

1680*1050 (LCD), click Add Resolution, and then restart, there should be this resolution.

If the screen is black when changing the resolution, press the ESC key, if it still doesn't work, restart the system self-test and press and hold F8 in time to enter the safe mode, disable the graphics card, restart, and enable the graphics card in normal mode. The black screen is because the refresh rate is too high, you need to customize the resolution to turn down the "update rate" on the right side of the dialog box, and the pixel frequency is lower, so that the pixel frequency is about 75 60 and try again.

The system has been reloaded! It is a system with an automatic loading drive! There are some more complete drivers in it!

1680*1050 resolution! The screen refresh rate is set to 60 Hz! Try!

This has something to do with both the graphics card and the display.,It's recommended to go to the home page of the monitor and graphics card to see.,Display range and frequency.。

Right-click on the desktop to display the menu point properties, pop up the display properties window, click the appearance on the far right to change the screen resolution.

In the display properties --Advanced --Settings--Adapters--Select List All Modes: Select 1680*1050 60Hz resolution, if there is still none, reinstall the graphics driver.

If you still don't have this resolution, install a monitor driver. Or go to Menu - All Programs - Professional Tools - Resolution Settings.

Very simple! You find a default monitor in the device manager in the device manager drop-down list, uninstall this, and then automatically identify the new hardware, it will recognize the plug and play monitor, and it will automatically recognize the monitor after shutting down and restarting.

There is another way: in the desktop - properties - settings - advanced - monitor, select "list all modes" to find, select and apply it, and then confirm it, but this is not the best method, it is recommended to use the first one!

Reinstall the graphics card driver, the newer the better, if it still can't be solved, it may be that the graphics card is not supported.

The relevant graphics card drivers are not installed.

Let's change to a graphics card. It's too old, and it's not much money to say it's new.

651 set display support 19 wide should not be a big problem, exclude the driving factor, try the following methods respectively:

1. Look at whether the monitor in the device manager is a plug-and-play monitor, if not, change it to a plug-and-play monitor.

2. The screen refresh rate is set to 60Hz! Is it 60Hz when powerstrip is adjusted?

Added: It seems that the only way to do BIOS by yourself is to use the BIOS to brush each other, as if the new BIOS support of Elite L4S5MG 651+.

Let's see what other people can do with it.

I've had this kind of problem too...

The way I solved it, first adjust the display resolution to 1024*768 and adjust the hz to the lowest·· Then turn off the computer.

Unplug the graphics card and reinsert it.

Turn on the computer, go to the desktop, and delete the graphics card driver.

Reboot, enter the desktop, reinstall the graphics card driver, and then set the resolution·· It should be OK...

The graphics card driver is broken, just reinstall it, method: my computer right-click > properties > hardware > device manager to find the graphics card and right-click to uninstall it, and then install the driver.

I'm also using this kind of graphics card.,The general resolution is adjusted to 1024*768 is more appropriate.,But there must be other resolutions.,If it doesn't work, uninstall it and reinstall the graphics card driver.。

Domestic monitors don't have that high resolution, so don't think about it. If only Samsung's monitor would do. This is the difference between domestic and imported screens, such as 22 screens, Samsung's have to sell for about 1300, and HKC can only be sold for about 1000, a difference of two to three hundred yuan, of course, there will be a big difference.

Samsung's screen is 70,000 to 1....It would be nice to have 50,000 to 1 HKC. The so-called penny price, you get what you pay.

The solution,You can only change the screen,As for using software or something, don't think about it.,The workmanship of the screen is not so good.,It's not supported at all.。

If you've installed a monitor driver, uninstall it and change it back to the default plug-and-play monitor.

In addition, your graphics card should not be too bad, if it is Intel or VIA, SIS early integrated graphics card (Intel 865G before) may have problems with large resolution support. It may also be necessary for you to have at least 128M of video memory.

Li Baier 1977 said that the refresh rate is also possible,I personally have never seen more than 60MHz can be used 1920*1080 resolution display,The landlord first try to reduce the refresh rate。

The black screen means that the system is switching the resolution, and you can click OK before the end of the countdown.

To supplement the upstairs, you set the refresh rate to 65hz and try again.

If the graphics card doesn't support that resolution, it won't. Update the latest graphics drivers. It should be possible to see the maximum supported resolution. If the performance of your graphics card is not up to it, then how you set it up will not work

Try to drive life, their "recommended driver" management items are recommended to install better adapted drivers, if it is a driver problem, I believe it can be solved