Peugeot 308 for Castrol oil?

Yes, there are too many Castrol fakes, and the quality of the real thing is definitely good.

Peugeot's engine manufacturers require the use of 0W-30 5W-30 fully synthetic engine oil, the original engine oil uses Total engine oil, you can also use other mainstream brands of engine oil, there is no problem, but it should be noted that the viscosity of the engine oil must not be used wrong.

Fully synthetic motor oil is the highest grade of motor oil. It is ethylene and propylene dispersed from gas or natural gas in **, and then refined into a lubricating liquid composed of macromolecules through complex chemical reactions such as polymerization and catalysis. In essence, it uses the best ingredients, chemical reaction and artificial control to achieve the expected molecular form, the fully synthetic oil molecules are arranged neatly, the ability to resist foreign variables is naturally very strong, so the physique is better, thermal stability, antioxidant reaction, and the ability to resist viscosity changes are naturally much stronger than mineral oil and semi-synthetic oil, so it is also the highest.

Hello. The oil model used in the 5W30 Peugeot 308 is 5W30, and the special engine oil for maintenance is Daoxian Dahl SL-5W-30. Here's why:

Compared with 5w30, 5w40 has the same low-temperature fluidity, but the difference is the high-temperature performance, and the high-temperature protection and sealing performance of 5w40 are better. By Brother Zheng Han in the viscosity cluster early increase makes the engine running resistance larger, fuel consumption increases, combined with the Peugeot 308 engine, 5W30 is relatively more suitable. [Compare hearts].

Peugeot 308 Steps to change the oil yourself:

Step 1: Run the ** motor to bring it to the working temperature. Then use a jack to jack up the vehicle, pull up the hand brake and squeeze the front wheels up with a wooden wedge.

Check the drain bolts, reinstall the drain bolts, and be careful not to tighten the bolts too tightly to prevent damage to the oil pan.

Step 3: Move the oil container under the oil filter, use the oil filter wrench to loosen the filter and unscrew it by hand. If the filter is still hot, remember to wear gloves.

Don't worry about the filter being tightened and damaging it during removal. As long as you don't damage the connection screws on which the filter is installed and the parts around the filter, you'll be fine.

Step 4: Refer to the user manual to select the appropriate oil filter.

Step 5: Apply the interface gasket of the new filter cartridge with new oil. If the filter is installed vertically, you can pour some fresh oil into the filter, which will reduce dry grinding the next time the engine starts.

Screw the filter in by hand and tighten the filter as indicated (usually after tightening the filter by hand and then screwing it in 3 or 4 turns).

Step 6: Next, add the new oil to the oil pan, refer to the user's manual. A funnel can be used to prevent oil from being poured on the outside of the engine.

Check the lower part of the engine for leaks. If there are no leaks, put down the vehicle, check the dipstick, and start the engine. The indicator light on the meter should turn off immediately after starting.

Finally, turn off the engine and repeat the oil level. Dispose of used oil and filters according to local regulations.

The role of motor oil.

1. Lubrication and wear reduction: between the piston and the cylinder, between the spindle and the bearing, there is relative sliding, to prevent the wear of the parts, it is necessary to establish an oil film between the two sliding surfaces. The surface of the part that is relatively sliding is separated by an oil film to reduce wear.

2. Cooling and cooling: The oil can bring the heat back to the oil tank and then dissipate it into the air to help the engine dissipate heat.

3. Cleaning and cleaning: good engine oil can bring carbide, sludge and wear particles on the engine parts back to the oil tank through circulation, and wash the dirt generated on the working surface of the parts through the flow of lubricating oil.

4. Sealing and leakage-proof: The oil can form a sealing ring between the piston ring and the piston to reduce gas leakage and prevent external pollutants from entering.

5. Anti-rust and anti-corrosion: lubricating oil can be absorbed on the surface of parts to prevent water, air, acidic substances and harmful gases from contacting parts.

6. Shock absorption and buffering: when the pressure of the engine cylinder port rises sharply, the load on the piston, piston chips, connecting rod and crankshaft bearing is suddenly aggravated, and the load is transmitted and lubricated by the bearing, so that the impact load bears plays a buffering role.

The Dongfeng Peugeot 308 is powered by a naturally aspirated engine. The version has a maximum power of 108kW, a maximum engine speed of 5750 rpm, a maximum torque of 200 Nm, and a maximum torque of 4000 rpm. 100 kilometers of comprehensive fuel consumption, manual transmission, automatic transmission.

The maximum power and torque of the model are 78kw 5750rpm. 100 kilometers of comprehensive fuel consumption for manual transmission, automatic transmission. @2019

The Peugeot 308 uses 5W30 oil, and the maintenance oil is Total SL 5W-30. Compared to 5w30, 5w40 has the same low-temperature fluidity, but the difference is high-temperature performance. 5w40 has better high-temperature protection and sealing performance, but it also increases the running resistance and fuel consumption of the engine due to the increase in viscosity.

Combined with the Peugeot 308 engine, the 5w30 is relatively suitable. Peugeot 308 oil change adds about 4L.

Naturally aspirated engines require general oil quality. Mineral oil and semi-synthetic oil can be used. If you have a big budget, you can use synthetic motor oil.

Compared with self-priming engines, turbocharged engines have more precise internal parts, more complex working conditions, higher requirements for oil performance, and require lubricating oil with better fluidity, and it is best to use fully synthetic engine oil.

For the choice of viscosity, 5W can be used in most areas in winter, but it is best to use 0W in some areas in the north (such as Heilongjiang), which has good cold start performance to adapt to the driving environment temperature. The high temperature viscosity value of the oil is generally , but if you often drive in congested road sections, the vehicle is relatively old, and it belongs to long-distance transportation and heavy-duty vehicles, you can appropriately increase the viscosity of the lubricating oil, such as using 0w50 engine oil.

The classification of motor oil is described as follows:

Classified by viscosity: 10W-40 is its SAE standard viscosity value. This viscosity value first indicates that the oil is a multigrade oil, with W representing Winter and the number in front of W representing flow properties at low temperatures.

The lower the value, the better the low-temperature start-up performance. The number after w represents the stability of the oil at high temperatures (i.e., the likelihood of thinning). The higher the value, the better the stability of the oil at high temperatures.

The winter oil grades of lubricating oil viscosity classification are: 0w, 5w, 10w, 15w, 20w, 25w. The symbol W stands for winter. The smaller the value before w, the smaller the low temperature viscosity, the better the low temperature fluidity, and the lower the applicable minimum temperature.

According to the viscosity classification of lubricating oils, the grades of summer oils are as follows. The higher the value, the higher the viscosity and the higher the applicable maximum temperature.

The general purpose oil grade for winter and summer in the viscosity classification of lubricants is 5w w w w w-50.

The oil model specification of the beautiful 308 application is 5w30, and the special maintenance oil is Total and 5w30 compared, with the same low circulation, but the difference is high performance, 5w40 high maintenance performance and tightness are stronger, but also because of the expansion of viscosity to promote the friction resistance of the automobile engine to increase the pin pants, fuel consumption is increased, the fusion of the beautiful 308 automobile engine, 5w30 is relatively suitable for the loss of the god Jane. When changing the engine oil, add 4L up and down.

The self-priming module has a general oil quality specification, and mineral oil and semi-synthetic engine oil can be selected, and if the cost budget is large, it can use full-generation engine oil. Compared with the self-priming automobile engine, the turbocharger automobile engine is more precise, the operation standard is more complicated, the oil performance is higher, the grease with stronger circulation is required, and it is best to generate the engine oil in full.

For the selection of viscosity models, in general, in winter, 5W can be applied in most regions, but some regions in the northern region (such as Heilongjiang Province) should try to apply 0W, which has stronger cold start performance to integrate into the working temperature of safe driving. The high viscosity value of engine oil is generally used, but if it is often driven safely on congested roads, the car belongs to a relatively old car, and belongs to a long-distance freight light-loaded vehicle, etc., the viscosity of the grease can be reasonably improved, such as the use of 0w50 engine oil.

The classification of motor oil is detailed below:

According to the viscosity division: 10W-40 is its SAE standard viscosity value, this viscosity value first indicates that this oil is a multi-grade engine oil, W represents winter, W front data represents the fluidity performance at ultra-low temperature, the smaller the standard value, the better the operation performance at ultra-low temperature. The data after w represents the smoothness of the oil at high levels (i.e., the probability of thinning), and the higher the scalar value, the better the smoothness of the oil.

The type of edible oil for winter with grease viscosity classification is: 0w, 5w, 10w, 15w, 20w, 25w, marked w represents winter, the smaller the data before w, the smaller the ultra-low temperature viscosity, the better the ultra-low temperature flowability, and the lower the minimum temperature available;

The larger the data, the greater the viscosity and the higher the maximum temperature available;

The year-round general oil type of grease viscosity classification is divided into: 5w w w w w

Millions of car purchase subsidies.