-
If a broadband fault occurs, you can use the following methods to troubleshoot the fault:
1 Use stand-alone dial-up, if you are using a router, please temporarily disconnect the router for testing;
2 Restart the modem and the computer;
3 Re-create the broadband dial-up connection and try to dial again. How to do it: Start the Program Attachment Communication New Connection Wizard.
If the self-troubleshooting still does not recover, you can contact human customer service to report the fault, and we will deal with it for you as soon as possible.
-
Modem(or other connected devices) reported an error that was caused by improper modem settings or missing system files that needed to be fixed.
Introduction to modems.
Modem de-targeting bending is the abbreviation of modulator and demodulator, Chinese called modem, according to the homonym of modem, affectionately called "cat", is an electronic device that can realize the modulation and demodulation functions required for communication. It generally consists of a modulator and a demodulator.
On the sending end, place the computer on the serial port.
The resulting digital signal is modulated into an analog signal that can be transmitted over a ** line.
At the receiving end, the modem converts the analog signal fed into the computer into the corresponding digital signal and sends it to the computer interface. on a personal computer.
Modems are often used to exchange data and programs with other computers, as well as to access online information service programs.
-
The modem reported an error because of a faulty NIC driver, which can only be fixed after an update. The steps are as follows:
1. Open the W10 desktop chain directly, right-click the computer icon and select Device Manager to enter.
2. If there is no problem, go to the relevant network card and right-click to update the driver to jump.
<>5. Complete the above operations and determine the corresponding results.
6. In this way, it will return to normal according to the diagram, and the requirements can be realized.
-
While using Windows 10, a user reported that the computer could not connect to a broadband connection, and a message appeared: Unable to connect to a broadband link modem (or other connected device) reported an error. What's going on?
If you encounter such a problem, it is best to try to restart the computer once to see, if not, you can share the repair method with you below.
Method 1:
3. Click the broadband link below the dial on the right, and then click [Advanced Options].
4. Open the broadband connection advanced settings interface, and we move the jujube belt to the following automatic configuration (the automatic setting may replace the settings you entered.) To use the settings you entered manually, turn off the Auto Detect switch under Auto Settings.
After the settings are completed, restart the computer once to use the broadband connection normally.
Method 2: Caused by the update
1. Also press Win+I, Update & Security - Windows Update - Advanced Options - View Update History - Uninstall Update.
2. Locate System Update and Security, find the latest patch installed in the system and uninstall it!
Method 3:
1. Press win+i, [Update & Security] --Recovery] --Reset] Reset all the settings of the computer once to solve the problem!
Win10 prompts "The modem has reported an error" The solution is here. If you are also experiencing the problem of modem error and cannot dial in, you may wish to follow the above method to take a look!
-
Some friends may encounter the broadband connection of the win10 system keeps prompting the modem to report an error situation, how to solve this problem without error prompts? Don't worry, let's teach you some practical methods, I hope it can help you.
Win10 system.
01 Press the Win+i key combination to open the Windows settings, and select "Network and Internet" here.
02 Then you can click on the "Dial" button on the left side.
03 Find "Broadband Link" under the dial on the right, cover it and click "Advanced Options".
04 Then open the broadband connection advanced settings interface, move to the "Automatic Leakage Detection" switch below the automatic configuration, and turn the switch on.
05 Finally, just restart the computer.
01 We can solve it through the computer's built-in method, first press and hold win+i to open the settings, find "Update and Security" and click to enter.
02 Here we can see "Troubleshooting", find the Internet connection on the right side, click the Troubleshoot button, click "Troubleshoot", and then follow the prompts.
01 Finally, you can use a more thorough method, which is to reset the computer. Press Win+i to bring up the control panel, click on "Update & Security", then select "Restore", and finally click on "Reset". Reset all the settings on your computer once and you're done!
02 It's best to back up the data you need before using this method to avoid loss.
-
I usually unplug all the cables and reinstall them, or disable the local connection and then enable them, and the problem is basically solved after a few months.
turn) modem (tiáozhìjiětiáoqì) i.e. modem
It can convert digital signals into analog signals and transmit them on the network, and can also convert the received analog signals into digital signals. Since most personal computers are connected to the computer network through the public ** network, the above conversion needs to be carried out through a modem. >>>More
First of all, your problem cannot be repeated on a network, otherwise it will conflict. >>>More
It's no secret that Apple wants to design and manufacture as much in-house as possible — a trend that prompted it to start building its own processors, which are now basically considered the best mobile chips in the world. Apple has also started producing its own security chips for Mac computers, and the current generation is known as the Apple T2 security chip. Eventually, Apple may want to use only Apple-made technology in both the iPhone and Mac ranges. >>>More
Internet access. Modem (i.e., modem) is a device for signal conversion between the computer and the first line, consisting of two parts: the modulator and the demodulator, the modulator is the digital signal of the computer (such as files, etc.) is modulated into a device that can transmit the sound signal on the first line, and at the receiving end, the demodulator converts the sound signal into a digital signal that the computer can receive. Data communication between computers can be realized through a modem and a ** line. >>>More
Win10 opens the IE browser as follows:
1. Use the key combination Win+R to open and run, type iExplore<> 2. Press Enter to open IE browser. >>>More