How to install a car cushion? How to install car cushions

Car saddle installation tutorial.

To install the car saddle, the specific steps are as follows:1. First of all, take out the seat cushion of the new car and check it, as shown in the figure below.

2. Next, put it into the cushion vest, as shown in the picture below.

3. Then, put on the saddle head cover, as shown in the figure below.

4. Next, take out the chuck as shown in the figure below.

5. Then, install the chuck on the sling of the seat cushion as shown in the figure below.

6. Next, after installing the chuck, insert the chuck into the gap as shown in the figure below.

7. Then, insert the chuck into the buffer pad and plug it as shown in the figure below.

8. Next, check the chuck after carding, as shown in the figure below.

9. Then, adjust the cushion apron as shown in the figure below.

10. Next, snap into the elastic band of the car seat cushion retainer, as shown in the figure below.

11. Then, put it into the headrest, as shown in the figure below.

12. Finally, the installation of the car seat cushion is completed, as shown in the figure below.

1. Take the installation of Toyota Corolla seat cushion cover as an example, first take out the new car seat cushion and check it, as shown in the figure below.

2. Next, put it into the cushion vest, as shown in the picture below.

3. Then, put on the saddle head cover, as shown in the figure below.

4. Next, take out the chuck as shown in the figure below.

5. Then, install the chuck on the sling of the seat cushion as shown in the figure below.

6. Next, after installing the chuck, insert the chuck into the gap as shown in the figure below.

7. Then, insert the chuck into the buffer pad and plug it as shown in the figure below.

8. Next, check the chuck after carding, as shown in the figure below.

9. Then, adjust the cushion apron as shown in the figure below.

10. Next, snap into the elastic band of the car seat cushion retainer, as shown in the figure below.

11. Then, put it into the headrest, as shown in the figure below.

12. Finally, the installation of the car seat cushion is completed, as shown in the figure below.

1. Before installation, first of all, check the quality of the purchased car cushion and the strength and length of the suture thread, so as to lay a good foundation for the installation behind the back. Usually a set of car cushions includes: two front seats, two rear seats and one long cushion, a total of five pieces.

2. The installation method of the front driver's seat cushion of the car: the front driver's seat cushion of the car has a hood, and the car seat cushion is directly put on the lower cover, and then there are one or two buckles at the car seat cushion body, you can directly insert the car seat cushion buckle into the gap of the seat by hand, so that the car seat cushion will not move forward. At this point, you hook two small hooks and loops in front of the paved car seat cushion into the iron bar under the seat.

Some of them do not have a tongue hook but an elastic band, so you need to pass the buckle through the middle gap of the seat through one end of the buckle and pass under the seat and lock it with the buckle at the other end. The front passenger seat is then installed, as is the other passenger seat.

3. Rear car seat cushion installation: First of all, please observe the installation method of the rear bench seat in the car, in fact, there are only two kinds, one is the buckled and unbuckled long seat, and you can directly enjoy the martyrdom of the Wei Falcon Xing Xiang Wen Xuan Cong Filter WeiOnce the car seat seat and rear backrest are separated, you can easily pass the long seat through the bayonet on the car seat seat and secure the long car cushion.

You can also put the back back into the cap of the rear seat.

4. Finally, after installing the bench seat, pay attention to the seat belt to be reset. You then insert the car seat cushion long cushion and the backrest fixing card into the gap, and then you can flatten the car seat cushion again.

Car cushion installation, buy it back and install it yourself, it turns out that this is the case.

If you have poor hands-on ability, it is best not to install it yourself, it is not standardized, and it is not beautiful.

If you need a seat cushion, you can check the web link.

The main purpose of car cushion installation is to clamp the chuck, adjust the position of the cushion, and keep the cushion firm and stable, and the specific installation method is as follows

1. Take out the car cushion in the front row, put it into the cushion vest, put on the cushion headgear, take out the chuck, and install the chuck.

2. Plug the chuck into the gap, plug the chuck into the chuck, clamp the chuck, adjust the cushion apron, put the elastic band of the car cushion apron, and put it into the car cushion headrest.

3. Take out the rear car cushion and put it in, install the chuck, lift the rear long seat with your hand and put it into the long row of vertical car cushions, install the card, and buckle the elastic band.

4. Adjust the position of the cushion, put it back on the rear car bench, press out the armrest to prepare the cover, and then insert it when it is pushed into an oblique angle.

5. Clamp the original installed backrest buckle, both sides must be firmly clamped, and finally adjust the overall feeling effect.

Notes:

Before installation, check whether the purchased car cushion has quality problems, as well as the stitching threads, the strength of the long ruler, the disadvantages of the slender family, etc., so as not to find problems in the middle of the installation.

There are many ways to install car seat covers, but the way car seat covers are installed is the same. Here's how to install a special seat cover for a special vehicle. Pull out the headrest before installing the car seat cover; Cover the backrest; Tuck the strips of cloth on the front and back of the backrest cover directly to the back of the backrest, and tie the strips of cloth to the back bottom; Then insert the hood into the backrest; Arrange and lay flat the covered backrest and install the front backrest.

Car Seat Cover Installation Steps Method: When installing the front seat headrest, the headrest should be removed first. The car headrest is designed as a hat and can be adjusted by inserting the headrest directly into the seat.

Install the front seat cushion backrest and pull out the headrest first; (2) Cover the backrest; (3) Place the flannel on the front of the backrest cover and the bottom of the back of the backrest cover, directly on the back surface, and paste it with the felt at the bottom of the back; Insert the hood into the backrest; Arrange the covered backrests flat and install the front backrests.

The installation of the front seat cushion seat cover, at first the seat cover is placed on the seat, and the appropriate position is adjusted; (2) If there is an excess near the backrest, plug it directly along the gap to the back of the backrest, and pull out the rubber band and rope with plastic buckles; Pull the rope tightly with the rope on the side of the seat, pull the hook and loop pull tab on the front of the seat from under the seat to the back, pass through the plastic buckle, and then fold back to stick it; (3) Then arrange the set of seat covers and install the front backrest.

The rear backrest is installed, and the headrest is pulled out first; (2) Cover the backrest; (3) Tuck the hook and loop and rope at the bottom of the front of the back cover behind the copy. Use hooks and loops to thread it from the bottom to the back, through the plastic buckle at the top, and then flip it back over to glue. The rope and the rope on the side of the backrest are fastened to each other; (4) Straighten out the covered backrest, then insert the headrest and install the rear backrest.

Rear seat mounting. The rear seats are pulled up slightly, and the entire seat can be turned up directly, which is quite simple to install; Place the seat cover on the seat and adjust the appropriate position; Pull the hook and loop at the front of the rear seat from under the seat to the back, through the plastic buckle, and then fold back to stick it; Then tighten the rope at the rear end; Then straighten out the covered seat cover and install the front backrest.

3.Can the post-split be used? When the seat cover is installed, the rear seats are wrapped in a single unit, which can also be used if the rear seats of your car are rarely opened and lowered individually. The rear seat cushions are mounted independently from the backrest.