Is the ANETTE pre filter expensive?

Personal thoughts, Annette pre-filter is divided into ordinary type, universal type and luxury type, the lowest ordinary type is also 1000 large, although the thing is small, but it plays a great role, because daily water is related to life and health, drinking water safety has attracted much attention, can make the water quality safer and healthier, and the long-term cost performance is still very high.

Pre-filter purchase skills: choose a big brand like imported from Germany.

1 The pressure should be high.

A good pre-filter can withstand high water pressure. If the water pressure is unstable, it will damage water pipes, washing machines, water heaters, boilers and other wading equipment, so seeing whether there is enough impact resistance is one of the key points to choose a good pre-filter.

2 Technologically advanced.

There are two types of flushing methods for pre-filters: direct flushing and backflushing, and at present, the technology of backflushing is more advanced. Because the direct flush type will be flushed from top to bottom with tap water containing impurities, so that impurities are easy to accumulate on the surface of the filter, and the backflush technology can be used to backflush with the filtered water from the upper layer, and at the same time carry out 360 degree automatic rotation, so that all angles of the filter can be flushed.

3 The material should be fine.

Whether the filter screen of the pre-filter is good or not also determines its quality. Some pre-filters use nylon filters; Some are stainless steel filters that don't feel good to the touch (there is no plastic structure inside to reinforce), which are easy to deform and are not very strong and durable. It is recommended that consumers should choose filter materials that are not easy to rust and deform.

4 Easy to operate.

When picking a pre-filter, remember to see whether the operation is convenient during flushing, and generally a good pre-filter is designed to be more user-friendly in this regard.

5. After-sales professional.

The installation of pre-filters requires professional operations, so after-sales service is crucial.

Here's what you need for a reference, the Annette pre-filter.

Hundreds of dollars of things are sold for as little as 2,000 yuan, and the moisture is too large, and the middlemen and plumbers peel the skin layer by layer.

Dear We will be happy to answer your <>

According to the teacher, the cleaning steps of the Annette pre-filter are as follows:1Turn off the water source:

Before washing, turn off the water source to prevent splashing or other accidents caused by excessive water flow. 2.Remove the filter:

According to the installation method of the Annette pre-filter, it is removed from the water pipe. Typically, there will be a rotating or tightened connector on the filter that can be loosened using a tool such as a wrench. 3.

Cleaning the filter: Put the filter in clean water and gently scrub the surface of the filter with a soft brush or sponge. Warm water and neutral detergents can be used to clean, but avoid using chemicals that are too strong to avoid damaging the filter.

4.Rinse the filter: Rinse the filter with clean water, making sure all cleaning agents and dirt are rinsed off.

You can rinse several times until the water becomes clear. 5.Check the filters:

Inspect the filter for damaged or worn parts. If a damaged part is found, it is recommended to replace it with a new filter. 6.

Install the filter: Reinstall the cleaned filter to the water pipe. The connector is screwed on to prevent water leakage.

7.Turn on the water source: After confirming that the filter is properly installed, turn on the water source and check for water leaks.

Please note that the frequency of cleaning depends on the water quality and usage. It is generally recommended to clean the filter every 3-6 months to maintain its normal operation and filtration effect. If the water quality is poor or if it is used more frequently, the filter may need to be cleaned more often.

Hello dear, if you want to remove the filter screen of the Annette pre-filter, you need to follow the steps below: Open the refrigerator door to find the Annette pre-filter located at the top of the inside of the refrigerator Gently turn the filter of the filter loose, and pull it down After cleaning or replacing the filter, reinsert it into the filter and tighten it It is worth noting that before removing and replacing the filter, be sure to turn off the power of the refrigerator and follow the relevant safety operation specifications to ensure the safety of yourself and the equipment. Extended Content:

Why should I clean or replace the filter? For the pre-filter, the main function of the filter screen is to filter impurities and harmful substances in the water and improve the quality of the effluent. Failure to clean or replace the filter screen for a long time will lead to clogging of the filter screen, affecting the water quality and use effect.

Therefore, it is very important to clean or replace the filter regularly. How can I be sure that the filter needs to be cleaned or replaced? In general, when the water comes out slowly or there is an odor, you need to check the condition of the filter.

Observe whether there is obvious dirt or color change on the surface of the filter, you can also gently touch it with your hands, if there is obvious stickiness and peculiar smell, then you need to clean or replace the filter. How do I clean my filter correctly? First of all, you need to rinse the surface of the filter screen with running water to remove the dirt and impurities on the surface before removing it; Then, soak in mild detergent or soapy water for a period of time (depending on the condition of the filter) and rinse thoroughly with running water.

Finally, let the filter filter mess up with a net to dry or dry it with a clean paper towel. Summary: Removing the Annette pre-filter filter is not a complicated matter, just follow the simple steps above.

However, in actual operation, it is also necessary to pay attention to safety and correct cleaning and replacement of the filter screen to ensure the use effect and life of the filter. I'm glad to answer for you, and I hope I can help you.