What do you need to learn to learn engineering cost from scratch? And I don t mean just for the sake

If you research, cheat, all kinds of cheating. Khan, not for the research, it is recommended to do a few years of construction staff and then come, you have done 5 years of construction cost is not as good as 2 years of construction back to do 3 years of cost, the master is mixed out of construction, or the site and the construction site of the cost staff, first learn to understand the drawings, CAD ah to be proficient, and then start to read, the basic knowledge has been seen, to cope with the exam, the pricing is carefully watched, and the quota should be seen carefully, to see the level of knowing so-and-so on such and such a page, and then it is practical, It is difficult for you to imagine if you have not done the construction site, such as the difference between the dry hanging keel and the curtain wall keel, even if you look at it, it is estimated that it is difficult to understand. The 16+4 in the quota plastering makes you unable to understand the meaning, or you can't notice the word at all.

It's like why there is pure cement mortar in the ground of the quota building, and there is no pure cement mortar in the ground of the quota building, and there is no inside with the pounding and wiping, only if you have seen it on the spot, you will pay attention to this difference, and then consider why there is no one, and then you know that the quota is not considered this process, and it is necessary to set it separately, and the practice in reality is basically difficult to be the same as the quota, so you need to convert, and the decomposition of the process one by one, such as fling, hooking, calendering, and grooves, which have to be counted as money. You don't even know how to do it.

The project cost refers to the total cost of carrying out the construction of a certain project. Project cost is a broad concept, and on different occasions, the meaning of project cost is different. Due to the different research objects, the project cost includes construction project cost, single project cost, unit project cost and construction and installation project cost.

The engineering cost major cultivates senior technical application talents with good scientific literacy, mastering the basic knowledge of engineering cost, familiar with the management of the whole process of engineering cost, and focusing on the preparation and control of engineering cost in the engineering construction stage after strict practical skills training.

Graduates majoring in engineering cost are mainly engaged in construction, installation, municipal and other construction stages of project budget, project settlement and final accounts, project audit and valuation, quota preparation and management; It can also be engaged in the construction and organization management of industrial and civil construction projects, project supervision, project bidding and project management.

Career direction: After graduation, students can be engaged in engineering (cost) consulting companies, construction enterprises (Party B), building decoration engineering companies, engineering construction supervision companies, real estate development enterprises, design institutes, accounting and auditing firms, infrastructure departments (Party A) and other enterprises and institutions, engaged in project cost bidding, construction project investment and financing and investment control, project cost determination and control, bidding decision-making, contract management, project budget (settlement) final accounts, project cost analysis, Engineering consulting, engineering supervision, and the development and application of software related to engineering cost management and technical support.

The first meaning: the project cost refers to the total fixed asset investment cost of the expected or actual expenditure of the construction of a project. That is, the sum of one-time expenses required for a project to form the corresponding fixed assets and intangible assets through construction.

This meaning is defined from the investor-owner perspective. In this sense, the project cost refers to the project. That is, for the completion of a project, it is expected or actually formed in the land market, equipment market, technical labor market, and contracting market and other transaction activities of the construction and installation project and the total construction project.

Usually, the second meaning of the project cost is only recognized as the project contract**. It is in the construction market through bidding, by the demand main investor and the supply of the main builder jointly recognized**.

Basic knowledge of construction project cost management.

Measurement and valuation of construction works.

A year or so. The learning period of project cost is mainly based on the individual's learning ability.

and learning pathways to decide. In general, if as a college major.

It usually takes 4 years for a bachelor's degree and 3 years for a junior college. If you do self-study on the job, it usually takes about 2 years. In general, learning is a lifelong knowledge, which mainly depends on the requirements of oneself, and learning thoroughly requires endless learning.

Learn the precautions for project cost.

Project Attributes: This part needs to be filled in before you do the project, but it can also be modified. Parameter values vary by region and project category.

Different provinces, different regions, different terrains, and different types of projects at different stages will lead to different project attributes, so you should fill in carefully.

Project fee: The project fee is also different depending on the type of project, and the project fee table of different nature is not the same, especially when the project is an expansion project, it is necessary to add the demolition fee table, and the demolition fee table is based on the silver wide and only counts the safety and civilized construction purity fee.

and tax rates.

For those who have just learned the cost, they should start from the following aspects:

1. Engineering drawings, thorough drawings are the foundation, all costs basically need to calculate the engineering quantity, and the drawings are the basis of calculation, which is the first step; So look at the drawings more, combine the node diagram, take good notes, and see what people have learned.

2. Be familiar with the pricing specifications and quotas, and understand the composition principle and calculation rules of the cost; Understand the difference between lists and quotas, etc.

3. Go deep into the site to understand the construction technology, general construction methods, processes, processes, plans, etc.;

5. Learn more about market information, various changes and cost-related documents;

The above are the main aspects, the cost is fast, but to become a master, you need more experience. You just interned, and there is still a long way to go in the future, as long as you work hard and don't be ashamed to ask, you will grow up step by step.

The following tells you the general cost calculation process:

1. Calculate and summarize the engineering quantity according to the drawings and quota regulations;

2. Arbitrage quotas and analyze the amount of talents and machines;

3. Adjust the talent machine according to the market price**;

4. Calculate and collect various taxes and fees according to regulations;

As for the reinforcement calculation you said, you need construction experience, you can first look at the atlas of the leveling method, learn the method of marking the reinforcement in the drawings, and understand the calculation slowly, this is a process, take your time and be down-to-earth I hope my answer can help you.

1. First of all, if you have the conditions, go to the construction site for a month and track a project. See, listen, and learn on the construction site, follow the technician and builder around, understand the entity, understand the operation of the whole project, understand the process, construction management is the whole process of management, such learning has too many benefits for you, learning the construction process is helpful for reading drawings and pricing.

2. We all know that the budget starts from the measurement, and the rule of how to measure is the first quota, first start with a simple project to learn the measurement, such as the column, beam and plate in the civil engineering measurement is relatively difficult, start from there. At this stage, it is the operating software, but the measurement is kept in mind while keeping the calculation rules in mind. Another point of the quota is the group price, which sub-projects apply which quotas, this is to communicate more with peers, and look at the pre-settlement information made by others in the past, which is the most effective way to learn, including the cost of the fixed amount.

All the work of the project cost includes: quantity, price and cost.

It is to calculate the quantity of the project, apply the list of fixed amounts to calculate the annual price of the group, and adjust the overall cost.

These jobs require a lot of practice and practical operation to master, and people who have no foundation can learn to read maps, learn to use software, learn calculation rules, and learn to set sets of quotas. Self-study is also perfectly fine, but there may be cases where there is no place to ask questions, and it would be best if someone could take them.

The first thing to do is to determine what kind of zero foundation you are;

1. Zero foundation in cost but rich experience in construction or design: For this kind of small partner, it can be counted as a "quasi-god" level in the original industry, and it is very easy to learn cost. Start with the quota, and after you are familiar with the quota description and calculation rules, you can learn the courses related to group pricing.

2. The cost of construction is all zero-based, just graduated or changed careers in other industries: start with the basic knowledge. First of all, I basically understand the definition, there are many free courses that are introductory courses that focus on basic knowledge, and I will look at them in combination with quotas in the process of learning basic knowledge.

In the early stage, you may not know what it means to see a lot of terms because the foundation is not solid, so you can go to some cost ** search, such as Glodon. Of course, you can also go to the Q&A service of some institutions, and it is also applicable if you do not buy a course. You can find a few more agencies, and then you can enjoy 24-hour uninterrupted service (this is what a friend of mine told me.

In fact, the cost is not a very difficult thing. It's just that no one teaches that it is more difficult to get started, and it is recommended to find more cost practical operations to cooperate with learning. Of course, it is best to buy the ** tutorial of the relevant major, so that you will answer questions for free, which will definitely help you a lot.

Although it is said that there is a degree of divergence, as long as you work hard and make a plan, you can learn well with zero foundation, after all, everyone comes from zero foundation, but the time to study after graduation is not so sufficient.

If you want to engage in engineering cost-related work, you need to pass the exam to get a certificate first, and it is still difficult to pass the exam, and there are not many people who have passed. Because there are 4 subjects in the exam, 3 of which are for theoretical knowledge and one for practical practice, which requires case analysis, it is not easy to take the exam with or without experience. Experienced ones may not be very good at theory, and those who don't have a foundation and don't have enough experience in case analysis, which is also a reason for the low pass rate of the exam.

In addition to preparing for exams, if you want to do this business, you need to focus on understanding and applying it in the learning process, and you need to master a lot of knowledge, so it is still very difficult to learn without a foundation.

Step 1: Read through the textbook. Read through the textbook for the first time to understand the general content of the textbook. Reading through is a short-term reading with a clear purpose, that is, to understand what the textbook is about and from which aspects.

Step 2: Read the textbook carefully and listen to the teacher's lecture. Reading the textbook is the most important thing. After reading a chapter by yourself, mark the difficulties, and then look at the teacher's lecture; Listening with a goal can achieve twice the result with half the effort.

Step 3: Practice. Confucius said, learn and learn.

Practice is one of the key points, there is no need to buy special exercises, and the amount of questions in the online school is sufficient. The choice of time to do the questions is also very important, usually after reading carefully, and before listening to the lecture. When you encounter a question that you can't do or do wrong, first look at the explanation of the answering teacher, which is very helpful to understand and consolidate the knowledge points.

At the same time, you must make a good record of the wrong questions, because the stupid questions that are easy to make mistakes indicate that your knowledge is not thorough enough. It is also necessary to work diligently, and the knowledge points that are easy to confuse should be excerpted in time and put together for comparison and memory; Practical case questions must be written more.

Step 4: Read through the handouts of the online school courseware. When reading through the handouts of online school courseware, you should have a quick glance at the key points, the purpose is to grasp the knowledge structure, the key points and difficulties of knowledge, and systematize the knowledge.

Step 5: Do real or mock questions. After reading through the handouts, be sure to do a few sets of real or mock questions to test your learning.

When doing the real questions, you should strictly follow the time of the search file according to the time of the examination room, so that you can master the speed of doing the questions, so that you can know it in your heart and not panic during the test. Compare and analyze with the standard answers to understand the main points of the answers, that is, the score points.

Step 6: Watch the live stream before the exam. Be cautious about live streaming before the exam. For students who are well prepared for revision, they can check and fill in the gaps by watching the live broadcast; For students who spend less time preparing for the early review, it can add a little confidence.

There are theoretical learning and practical learning, most of the engineering cost is work-related, and finally it is a good point with practical teaching. Hands and feet up!