The computer always shows how to deal with automatic repair

1. Automatic repair at startup may be related to your improper operation before shutting down, such as operating large things, using the computer for a long time caused by Caton, or inappropriate things, or deleting system files, or power-off shutdown, etc., failures will not occur for no reason.

2. The solution is as follows: the system may be caused by a medium virus. Use anti-virus software for detection and anti-virus.

Because the installed software or plug-ins are not compatible with the system, there is a conflict. Remove the conflicting software. If the reinstallation is also repaired, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed something inappropriate, uninstall all the inappropriate things before the accident, or restore the system or reinstall, if the computer is win8, you can't enter the system and you can't enter the safe mode, only reinstall.

The automatic repair of the boot may be related to the improper operation before you shut down, such as: playing games, watching, operating large things, using the computer for a long time caused by the card, or inappropriate things, or deleting system files, or power off and shutdown, etc., the failure will not occur for no reason.

The solution is as follows:

1. The system may be malfunctioning due to a virus. Use anti-virus software for detection and anti-virus.

2. Because the installed software or plug-ins are not compatible with the system, there is a conflict. Remove the conflicting software.

3. If the reinstallation is also repaired, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed something inappropriate, uninstall all the inappropriate things before the accident, or restore the system or reinstall it, if the computer is win8, you can't enter the system is not in safe mode, only reinstall.

Summary. Hello dear, there are many possible reasons for automatic repair of the computer, and the following are a few possible reasons:1

Hardware failure: Hardware issues can cause your computer to suddenly have an auto-repair situation, such as bad sectors on the hard disk, memory module failure, etc. 2.

Virus infection: When a computer is infected with a virus, the operating system may have abnormal behavior, resulting in automatic repair. 3.

Operating System Corruption: If the operating system is corrupted during the computer startup or operation, an automatic repair will be displayed to try to fix the operating system corruption or error. 4.

Software compatibility issues: When installing new software or upgrading software, there may be incompatibility with the system, resulting in automatic repair. 5.

Abnormal shutdown: When the computer is not shut down normally, the program may exit abnormally, resulting in automatic repair the next startup. In short, when the computer is automatically repaired, it is recommended to carry out system diagnosis and repair as soon as possible, and pay attention to maintaining good habits in daily use, such as upgrading the operating system in time, installing anti-virus software, etc., to avoid problems.

Hello dear, there are many possible reasons for automatic repair of the computer, and the following are a few possible reasons:1Hardware failure:

Hardware issues can cause your computer to suddenly have an auto-repair situation, such as bad sectors on the hard drive, a faulty memory module, etc. 2.Viral Infection:

When a computer is infected with a virus, the operating system may have an abnormal situation that causes automatic repair. 3.Operating system corruption:

If the operating system is corrupted during the computer startup or operation, automatic repair will be displayed to try to fix the operating system corruption or error. 4.Software Compatibility Issues:

When installing new software, or upgrading the source mask software, there may be incompatibility with the system, and the beam bucket will cause automatic repair. 5.Abnormal shutdown:

When the computer does not shut down properly, the program may exit abnormally, resulting in automatic repair the next time it is launched. In short, when the computer is automatically repaired, it is recommended to diagnose and repair the rubber crack grinding system as soon as possible, and pay attention to maintaining good habits in daily use, such as upgrading the operating system in time, installing anti-virus software, etc., to avoid problems.

You can click Restart to try it.

Ordered, still like this.

The situation where the computer does not boot properly with AutoFix is usually caused by corrupted system files, hardware failure, improper software installation, etc. Some errors or disk errors may occur that cause the system to fail to complete while booting the operating system. At this point, the computer will automatically start a repair process to try to restore the normal operation of the system.

In this case, we recommend that you follow the following steps to troubleshoot and fix the problem:1Rock examiners check the computer for hardware failures, such as hard disk failure or memory damage.

2.Try to enter safe mode to further troubleshoot and repair the system. 3.

Antivirus and clean your computer to ensure the purity of your system. 4.Try using the system recovery disk or system reset function to repair it.

If the problem cannot be solved by talking about dates, it is recommended that you contact a professional for investigation and maintenance.

In daily work, the computer will occasionally encounter the situation that the computer will be automatically repaired when the computer is turned on, if there is this situation of automatic unlimited restart at boot, what should we do? The following will teach you how to fix the computer automatically when it starts up.

The computer boot has been stuck in the preparation for automatic repair, mainly because the computer's system files are damaged, resulting in the computer can not start abnormally, so the boot will show automatic repair. There are basically 4 main reasons for this situation:

1. If the computer mistakenly deletes or destroys the system files, then you need to reinstall the system, you can use Xiaobai to reinstall the system with one click.

2. It may also be caused by the compatibility conflict between the installed software or plug-ins and the system.

3. It may be that the system suffers from malware or computer virus, and the virus causes the system to malfunction. Force shutdown 3 times, then restart the computer will appear recovery interface - the interface will appear to select "Advanced Recovery Options" - then select "Incurable Diseases" - then select "Advanced Options" - click on Startup Settings - then the computer will reboot into safe mode, after entering safe mode, use security software for antivirus.

4. It may be a disk problem. You need to check the disk, and if there is a problem with the hard disk, you can replace it with a hard disk.

Auto-Repair is a built-in feature of your computer. If the computer is prompted to automatically repair, it is likely to be caused by an abnormal shutdown, including an unexpected power failure, or it may be caused by the following conditions:

1. The last time I used the computer correctly, I accidentally deleted or damaged some pre-Kaisan files of the system.

2. The installed software or digging is caused by the compatibility conflict between the plug-in and the system.

3. The system suffers from malware.

or computer viruses, which cause the system to malfunction.

In this case, it is recommended that you first select Normal Boot or Shutdown and Restart. If it still doesn't start up properly, try using your computer's repair function again.

Summary. Auto-Repair is a built-in feature of your computer. If the computer appears to be automatically repaired, it is likely that it is an abnormal shutdown, including an unexpected power outage.

Auto-Repair is a built-in feature of your computer. If the computer appears to be automatically repaired, it is likely that it is an abnormal shutdown, including an unexpected power outage.

Can you add, I don't quite understand it.

Self-monitoring repair is a built-in feature of the computer. The prompt of automatic repair of the computer is likely to be caused by the abnormal shutdown before Kaisan, including accidental power failure, or it may be caused by the following digging situations: 1. The last time the computer was used correctly, some system files were deleted or damaged by mistake.

2. The installed software or plug-ins are in conflict with the system compatibility. 3. The system suffers from malware or computer virus, and the virus causes the system to malfunction. In this case, it is recommended that you first select Normal Boot or Shutdown and Restart.

If it still doesn't start up properly, try using your computer's repair function again.

Summary. 1. The automatic repair of the computer boot display may be caused by the sudden shutdown of the computer or the card before the shutdown, resulting in the damage to the disk, and the general boot repair is related to the improper operation before the shutdown, such as: playing games, watching, operating large things, and using the computer for a long time caused by the card.

Why does your computer appear to be automatically repaired?

1. The automatic repair of the computer boot display may be caused by the sudden shutdown of the computer or the card before the shutdown, resulting in the damage to the disk, and the general boot repair is related to the improper operation before the shutdown, such as: playing games, watching, operating large things, and using the computer for a long time caused by the card. Or ** out of the right thing, the fault will not be without.

Can you tell us more about that?

Here's why:1The system automatically scans the registry during startup and repairs any errors.

2.You can also check the registry while the system is running: run scanregw, the program will quickly scan the registry and display the scan results, and if there is an error, it will prompt whether to repair it automatically, if you do not make a special backup of the registry.