What should I do if the antifreeze in the car can t be circulated Can I still drive it

If the water temperature light on the dashboard is on, it is time to add antifreeze in time, otherwise it may damage the engine.

The main functions of antifreeze are the following three points:

1. It plays a role in anti-corrosion protection for the components of the cooling system.

2. Prevent scale and reduce the temperature of the radiator.

3. Ensure that the engine can work within the normal temperature range.

Therefore, when the antifreeze is missing, it will directly affect the heat dissipation effect of the water tank, when the water temperature is too high, the red water temperature light on the dashboard will light up, if you do not turn off the engine and continue to drive, it may cause the engine to pull the cylinder and be damaged.

The antifreeze replacement cycle should be subject to the manufacturer's manual, usually every 2 years or 40,000 kilometers, and the longest is every 4 years or 60,000 kilometers. There are a few car manufacturers antifreeze support lifelong free replacement, only need to be checked regularly, because the fluidity of this antifreeze is slightly poor, you need to pay attention to whether the cooling system circulation heat dissipation is normal.

It is necessary to pay attention to the location of the antifreeze and be sure to keep it between the lowest and highest values.

Hello! Antifreeze does not circulate and the vehicle is no longer able to drive. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

The car pulls the cylinder engine and does not rotate.

It's best not to drive, go and check the thermostat and water pump [If there is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Can't open it, it's frozen. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

The antifreeze of the water tank does not circulate, and it is normal for the throttle to be circulated when the throttle is increased, the difference is that the radiator of the water tank is not walked, and the size of the cycle is switched by the thermostat. When the throttle is increased, the engine has high power and heat, so in order to dissipate heat, the thermostat will adjust and open the large cycle, and the water tank will circulate at this time.

The radiator of the water tank mainly achieves the purpose of rapid heat conduction by diverting and increasing the contact area between the antifreeze and the radiator pipe wall, and finally dissipates the heat from the heat pipe conducted by the antifreeze into the air through the heat sink. When used for a long time, the performance of the antifreeze will also deteriorate, and the antifreeze must be replaced in order to ensure the normal operation of the engine.

Normally, as long as the same type of antifreeze is used in accordance with the regulations, there is no need to clean the water tank when replacing it. The tank needs to be cleaned only if the antifreeze is contaminated, or if the tank is scaled.

It's not easy. It's just not blocked.

The idle warm air is not hot, the refueling is hot, the idle antifreeze is not circulating, the refueling cycle, this fault is that the cooling water system of the vehicle is not enough, the cooling water is insufficient, the cooling water will lead to poor circulation, the fuel pedal will be circulated, and the gas pedal circulation will be weak, this is because there is air resistance when adding cooling water for the first time, and it will not be filled at one time, and then add cooling water after the car is cold, and the specific operation steps are as follows:

1. Open the door on this side of the cab.

2. Pull the hood switch on the left side of the driver's leg.

3. Lift the hood of the engine upwards.

Fourth, use the support rod to support the hood to ensure that the support is firm and avoid danger.

5. Open the cooling water tank cover and add cooling water.

Precautions: 1. You need to add cooling water of the same type.

2. Open the lid of the water tank to avoid splashing and scalding.

Summary. The lack of antifreeze in the car will cause the antifreeze to be unable to circulate normally, the engine can not dissipate heat normally, the engine temperature will be too high, the vehicle will be boiled, etc., and in serious cases, it will cause the engine to burnAntifreeze is a kind of coolant containing special additives, mainly used in the liquid-cooled engine cooling system, antifreeze has the function of anti-corrosion protection for the parts of the cooling system and ensuring that the engine can work within the normal temperature range.

Hello dear. Antifreeze does not circulate and there is no consequence of being able to radiate the radiator again. 1.

The coolant can no longer be effectively circulated between the radiator (water tank) and the engine, reducing the heat dissipation performance of the radiator. 2.The heat dissipation performance of the radiator is reduced and the spine is low, which promotes the rapid increase of engine temperature.

3.When the engine temperature rises rapidly, the engine will pull the cylinder if it is still forced to drive.

The lack of coarse antifreeze in the car will cause the antifreeze to be unable to circulate normally, the engine can not dissipate heat normally, the engine temperature will be too high, the vehicle will be boiled, etc., and in serious cases, it will cause the engine to burnAntifreeze is a kind of coolant containing a special addition of rock fierce liquid, which is mainly used in the liquid-cooled engine cooling system, and the antifreeze has the function of anti-corrosion protection for the components of the cooling system and ensuring that the engine can work within the normal temperature range.

In the past, the antifreeze water pipe leaked, but it was repaired, and the water tank was rotten again, whether the water tank was broken due to air holding.

Does it have anything to do with the oil radiator?

Dear, there is a possibility of this reason.

What are the main reasons.

Dear, it must have something to do with the oil radiator.

I felt like I was holding my breath, so I took care of the leak and stretched out the other places.

The reasons are: 1. Sealing problems of cooling nuclear limb system. 2. Lack of pipeline branches. 3. Water tank problem. 4. Prevent damage to the frozen liquid pot in the world. 5. The cylinder block of the engine is broken.

It could also be a problem with the tank: the tank is rusty leading to perforations, antifreeze leakage.

The fault light doesn't come on.

Dear, it's just a possibility, because you can't check it face-to-face, you can only rely on your one-sided description and I'll talk about the possible reasons one by one.

Engine coolant must be mixed with distilled water and antifreeze, and pure antifreeze cannot be added alone, as pure antifreeze will cause high water temperatures.

Antifreeze has the effect of antifreeze and the ability to prevent rust.

Antifreeze: Generally ethylene glycol or propylene glycol for our industrial use.

Its function is: to increase the "boiling point" of our engine coolant (the temperature of the cooling water boiling pot), reduce the "condensation point" of the cooling water, the service life is generally 1---2 years, there is a special test strip for measuring the concentration of coolant, the concentration of antifreeze is generally 35%--68%, and the recommended value of the general vehicle is 50%, that is: 50% antifreeze + 50% pure water constitutes engine cooling water.

The service life is generally 1---2 years.

1. First of all, the color of the antifreeze does not mean that the antifreeze is bad, the color is just the different proportions of each antifreeze manufacturer, and different pigments are added.

2. After the antifreeze is used for a period of time, it is not based on the brightness of the color to determine whether it needs to be replaced, but the concentration of the antifreeze to determine whether it needs to be replaced (the concentration needs to be tested with a special test strip, which is available in the maintenance station).

3. If you replace a different brand of antifreeze, you need to clean the previously used antifreeze to reduce chemical corrosion, and you need to clean the water tank, so it is recommended that you clean the water tank.

Hello, there is gas in the engine, just exhaust it.

The coolant does not circulate, the water does not flow, the water temperature inside the engine must be very high, and the water temperature bend near the liquid finger near the water temperature sensor may not be high, and the sensor may be broken.

1. There may be water leaks, check it carefully. 2. The vehicle is boiled at high temperature for a long time, and the evaporation is too fast. 3. Use inferior antifreeze and evaporate quickly.

Hello: Glad to answer for you:

You know that when the engine is started, the water in the tank circulates rapidly to create a certain amount of pressure, which will expel a portion of the antifreeze from the vent. At this time, there will be a lot less antifreeze in the auxiliary water tank (Shuo material pot) of the water tank, and the antifreeze will be added without understanding the reason, and the result will be one.

The day is still short of antifreeze. When the car is cold, just check that the water tank is full of antifreeze, and don't care about the level of antifreeze in the auxiliary tank.

Just run for a while to see if the tank is short of antifreeze, and how much antifreeze you fill will be discharged. It's a waste and a hassle, isn't it!

I hope I can help you, and if you are satisfied, you can adopt me. Thank you.