How to operate the oppo A31t grid?

OPPO A31T Grid Machine Method:

2.Then find [1] Flash the tool and run it as administrator. exe] file, double-click it to open it.

3.Then turn off the phone, and connect the phone to the computer with a data cable while holding down the volume up button of the phone while the phone is completely turned off.

4.If you click Start to start flashing after confirming that there is no problem, the software will display a progress bar during the flashing process.

<>5.After completion, the software will prompt that the flashing is successful, at this time we can unplug the data cable and wait for it to be turned on.

If the above methods do not solve the problem, you can try:

1.Connect to the Flashmaster.

2.As shown below, one key root for OPPO A31T

3.Make a data backup of your phone as shown below.

<>5.After entering the "one-click flash" mode, it will take about 5-15 minutes to complete the one-click flashing of the OPPO A31T.

<>6.Wait patiently for a few minutes and the flashing will be done automatically.

Method Steps]:

Connect to the Flashmaster.

As shown below, one key root for OPPO A31T

Make a data backup of your phone as shown below.

After <> enters the "one-click flash" mode, it will take about 5-15 minutes to complete the one-key flashing of the OPPO A31T, wait patiently for a few minutes, and the flashing will be completed automatically.

Other Methods]:

Turn off the phone, press the power button and the volume button, and press the button together to enter the recovery mode, and if there is double clearing, you can directly check the machine, remember to back up the data first.

If you have any other questions, you can enter the OPPO enterprise platform to ask customer service.

Precautions]:

Turn off the phone, press and hold the power button and the volume down button at the same time for 8 seconds to enter the OPPO recovery mode (engineering mode), if you need to exit after entering, you can refer to the following method: ColorOS version, click "Restart the phone now", or press and hold the power button to turn off the phone, and then turn it on;

For non-coloros versions, move the cursor to the shutdown or restart item by using the volume button, or directly click the shutdown and restart, and click the power button to confirm; If the screen is Select Installation Package. and so on, please move the cursor to. , click OK to return to the Restart and Shutdown page, and you can shut down or restart.

OPPO A31T Mobile 4G Mobile Phone Flashing Bag.

If the phone is restarted repeatedly and cannot be turned off, press and hold the power button + volume button until it shuts down, or remove the back case and reinstall the battery for power supply.

If the driver cannot be installed during the flashing process, you can automatically install the driver through the driver wizard or the flashing wizard After installation, you can re-flash the machine.

After flashing, you need to press and hold the power button for about 10 seconds until the phone vibrates and then let go, it takes three or four minutes to turn on the phone for the first time, and it is OK to test it yourself.

The OPPO A31 is OTG supportive.

The Oppo A31 has an inch-854x480 resolution IPS display; Powered by Qualcomm Snapdragon 410 quad-core 64-bit processor; 1GB RAM + 8GB ROM, support up to 128GB memory card expansion; Runs the Android-based ColorOS operating system; It is equipped with a 2000mAh battery and dual SIM card slots, and both card slots support mobile 4G networks.

In terms of photography, the OPPO A31 mobile version uses a 1-inch 8-megapixel back-illuminated sensor, F aperture, 5P lens and blue glass filter, and is equipped with OPPO's exclusive PI original image engine.

OPPOA31T supports OTG function.

The Oppo A31 has an inch-854x480 resolution IPS display; Powered by Qualcomm Snapdragon 410 quad-core 64-bit processor; 1GB RAM + 8GB ROM, support up to 128GB memory card expansion; Runs the Android-based ColorOS operating system; It is equipped with a 2000mAh battery and dual SIM card slots, and both card slots support mobile 4G networks.

In terms of photography, the OPPO A31 mobile version uses a 1-inch 8-megapixel back-illuminated sensor, F aperture, 5P lens and blue glass filter, and is equipped with OPPO's exclusive PI original image engine.