How to enter the wifi setting interface of the notebook

Tools Raw materials.

Computer. Method steps.

The first step is to go to the Network & Internet option of the Control Panel.

There is an Intel wireless tool in the network and Internet option in the control panel, this tool is generally installed when you buy a computer, if you don't have it, you can go to the official website**, open, enter inter wireless technology to find the corresponding option.

Step 2: Enter the My WiFi tool and click the ON button.

There is a green enable button on the right side of the My WiFi tool, at this time the wifi is not enabled, you need to click to activate it.

The third step is to configure the wifi information.

Once enabled, click the Enable Configure button below to configure it. First of all, click the button after entering, and then you will enter a wireless network configuration interface, enter the name of the network to facilitate other devices to identify the computer, enter the security and select the encryption method and enter the password.

Step 4: Set up sharing.

Filter network traffic:

1) Once enabled, communication between the Intel My WiFi technology network and other WiFi networks that may be connected to the laptop will be blocked, and their device will not be visible (and internet connection sharing will be disabled).

2) Once disabled, the two networks will be bridged, allowing devices on those networks to communicate with each other.

Step 5: Make a wifi connection.

After the configuration is completed, click OK to complete the WiFi setting, and then you can connect with the computer through other communication devices.

Start --- set --- network and internet --- Wi-Fi is set to On.

Some notebooks have hardware wireless switches, and most notebooks have wireless function button design, generally FN+F2 or FN+F12, you can consult the notebook manufacturer for details. Cavity bucket.

You can also turn on or off the wireless function of wheel grinding through the lower right notification bar through the lower right notification bar under win10.

Use FN+F2 F12 Use FN+F2 F12 to open the keyboard of the wireless notebook have shortcut keys to open the wireless function, generally FN+F2, or FN+F12, the notebooks produced by different manufacturers will be different, as long as you find the button with the wifi logo, some manufacturers' notebooks will have a pattern of an airplane, this represents the flight mode, when you press the button of the FN+ flight mode, the wireless network will be disconnected, and it will be turned on if you press it again.

You can tell if the Wi-Fi function is turned on by looking at the status indicator on the laptop. Generally, the light indicates that it is turned on, and if it is off, it means that the non-volt line network has been turned off. Some of the old laptops will have a physical Wi-Fi switch button, just flip the button to the open position.

Method. 2. Enable wireless networks through wireless network management. Laptop, also known as "laptop, laptop, handheld or laptop", is characterized by its small body, which is easier to carry than a PC, and is a small, easy-to-carry personal computer, usually weighing 1-3 kg.

The current trend is to be smaller and lighter, but more powerful. In order to reduce their size, notebook computers today use liquid crystal displays (also known as liquid crystal LCD screens). In addition to the keyboard, some also have a touchpad or pointingstick as a pointingdevice.

Start setting up --- --- network and Internet--- Wi-Fi Peizu set up a disadvantage for the opening of the matching.

You can enter it by opening the Settings button on your computer and then clicking on Network. On the network page, click WLAN and turn on the switch under WLAN. Here's how to open it:

Equipment: Lian He wants to think about the new pad inch computer;

Operating system: win10 professional version;

Software: 21H1 version of the settings for the self-ruler strip.

1. Click Start in the lower left corner of the computer and select Settings to enter.

2. Click on the network to enter after the page jumps.

3. Click the WLAN button after entering the network interface.

4. In the page that appears, you can see the switch under WLAN, click it to turn on to turn on the WiFi function.