How do you clean gold jewellery properly?

1. Ammonia cleaning method: gold jewelry can be cleaned with a small amount of ammonia. First, put the jewelry in the container, add water to the container, then add a small amount of ammonia, then shake the lid of the container vigorously, then remove the jewelry and let it dry.

Of course, for the thousand-dollar gold necklace that is often worn, you also need to pay attention to the maintenance of the buckle of the necklace. You can regularly drip a little sewing oil on the switch to prevent the micro springs in the switch from rusting.

2. Clean with a toothbrush or absorbent cotton ball: Wear ** jewelry often, it will inevitably get dusty. The easiest way to clean the dust and dirt of ** jewelry is to use a soft brush dipped in hot water to gently clean it.

You can also use absorbent cotton balls dipped in soapy water and anhydrous alcohol to scrub, but you must be careful not to scrub with abrasive particles such as toothpaste, polishing paste, fine sandpaper or fine abrasive cloth, so as not to reduce the weight of the gold necklace and cause losses due to friction between the particles and **.

Three. Fire-roasted** to remove white spots: Many women tend to wear makeup when wearing *** necklaces.

As a result, cosmetics contain trace amounts of mercury that cause white spots or whitening of jewelry when it comes into contact with cosmetics. In the face of such a situation, everyone must be careful not to scrape or sandpaper the necklace with a knife. As long as the whitened gold necklace is roasted in the fire, and then dried with a soft cloth, you can restore the original luster of the ** jewelry.

Four. How to clean with homemade cleaning solution: When cleaning, you can first take 1000 ml of warm boiled water (about 40), then add 200 ml of glacial acetic acid to make an aqueous solution, and then soak ** jewelry in this cleaning solution for 10 minutes, then wash with a brush, and finally rinse with water.

5.Polishing method of developing powder: **Jewelry will be worn for a long time, and the surface will fade after dirt, and the luster will become dull.

At this time, if you want to restore the color of the jewelry, you can choose the developer powder of the developer, use 30-40 warm water to turn it into a developer, and then add twice the water to dilute it. After soaking the gold necklace for about 4 to 6 minutes, gently brush it with a soft brush and finally rinse it several times with water.

A great way to emo gold jewelry, clean and not drop grams.

<><How to clean gold jewelry:

1. Removal of jewelry dust

To clean the dust and dirt of ** jewelry, the easiest way is to use a soft brush dipped in hot water to gently scrub it, it is best to use a cotton ball dipped in soapy water, anhydrous alcohol for regret scrubbing, but do not use abrasive particles (such as toothpaste, polishing paste, fine sandpaper or fine abrasive cloth, etc.) to scrub, to avoid reducing the weight of ** jewelry and causing losses.

2. Washing of jewelry

When washing ** jewelry, you should first put ** jewelry in the container, then add water to the trace return container, and then add a small amount of ammonia, then cover the mouth tightly, shake it back and forth vigorously, and then take it out and wipe it dry.

3. Removal of white spots in jewelry

Due to the fact that some of the cosmetics on the market contain trace amounts of mercury (mercury), such as phenylmercury and mercuric dichloride in the freckle cream, there will be white spots or whitening after contact with the first Chazhou decoration, at this time, do not scrape with a knife or sandpaper, as long as the white spots or whitening jewelry is baked in the fire, and then wiped clean with a soft cloth, ** jewelry will return to its original luster.

4. **The surface of the jewelry is clean

**After the surface of the jewelry is stained with dirt, it will make the color light, at this time, you can use the development powder of rinse**, with 30-40-C warm water to make a developer, and then double the water dilution, put the dirty **jewelry in it and soak it for 4-6 minutes after brushing off the dirt with a soft brush, rinse it with water several times, if you use fine tweed to dip the nail polish and wipe it, **jewelry will be brighter.

5. Soak and clean

First take 1000 ml of warm boiled water (40-C), then add 200 ml of glacial acetic acid to make an aqueous solution, then put ** jewelry into this cleaning solution and soak it for 10 minutes, then brush it with a brush, and finally rinse it with water.

When you don't usually wear ** jewelry, put it in the box and don't put it with other metals, which is easy to wear.

Send it directly to the gold store to be cleaned, which is difficult for ordinary people to clean.

**Jewelry usually pay attention to frequent cleaning:

1.Dust removal To clean the dust and dirt of gold jewelry, the easiest way is to use a soft brush dipped in hot water to gently scrub, it is best to use a cotton ball dipped in soapy water and anhydrous alcohol to scrub, but do not use abrasive particles (such as toothpaste, polishing paste, fine sandpaper or fine abrasive cloth, etc.) to avoid reducing the weight of gold and causing losses.

2 Washing of pure gold necklace When washing pure gold necklaces, you should first put the pure gold necklace in a container, then add water to the container, then add a small amount of ammonia, then close the mouth tightly, shake it back and forth, and then take it out and wipe it dry. When wearing a ** necklace, you should also maintain the buckle switch, and regularly drop a little sewing oil on the switch to prevent the micro spring in the switch from rusting.

3 Removal of white spots in gold jewelry Because some of the cosmetics on the market contain trace amounts of mercury (mercury), such as phenylhydroxymercury and mercuric dichloride in the anti-spot cream, white spots or whitening will appear after contact with the jewelry. At this time, do not scrape with a knife or sandpaper. As long as the white spots or whitish jewelry is baked in the fire and then wiped clean with a soft cloth, the gold jewelry will return to its original luster.

4.Clean surface dirt When the surface of gold jewelry is stained with dirt, it will dull the color. At this time, you can use the development powder of the first flush, mix it with 30-40 C warm water to make a developer, dilute it with double the water, put the dirty gold jewelry in it and soak it for 4 6 minutes, brush off the dirt with a soft brush, and rinse it several times with water.

If you dip a thin tweed in nail polish and rub it gently, the jewelry will be brighter.

5 Soak and clean First take 1000 ml of warm boiled water (40 C), then add 200 ml of glacial acetic acid to make an aqueous solution, then put ** jewelry into this cleaning solution and soak it for 10 minutes, then brush it with a brush, and finally rinse it with water.

1. Wash with toilet water.

Jewelry can also be cleaned with toilet water, which not only has the effect of repelling mosquitoes, but also has a cleaning effect on **jewelry. Specifically, the seller can use a small Nashi cotton swab dipped in a little toilet water, and then gently wipe the ** jewelry. If the wipe is not clean, you can use more toilet water, soak the ** jewelry, and soften some dirt bubbles that are difficult to remove, so that it is easy to clean.

After soaking, wipe it with a small cotton swab, and the dirt will be easier to wipe off. The cleaning power of toilet water is not very strong, and it is not easy to clean some small corners, if it is more surface dirt, you can try it with toilet water.

2. Professional cleaner.

If you are not sure about some cleaning products, you can use professional detergents to clean them. Often, the cleaning power of this professional detergent is also relatively large, so you can clean with confidence, and most of the dirt can be cleaned. Specifically, you can take a bowl of water, then squeeze the detergent into a little, and then put the **jewelry in it to soak for a few minutes, and after a few minutes, take out the **jewelry and gently brush it with a soft-bristled toothbrush, and finally wipe it clean with a clean towel, and the **jewelry can also restore its luster.

It should be noted that you can't soak it for too long with this professional hole clearing bucket limb cleaner, and soaking it for too long will damage the ** jewelry to a certain extent.