How to clean the floor turn 5, how to clean the floor turn

Tiles are often stained by greasy, water embroidery, soap stains, etc., especially in the joints of ceramic tiles. In order to keep the porcelain surface clean and not damage the glossy porcelain surface, you can use a multi-purpose stain remover to clean it. In the gaps of the tiles, you should first use a toothbrush dipped in a little detergent to remove dirt, and then brush a waterproof agent with a brush in the gaps, which can not only prevent water seepage but also prevent mold growth.

Vitrified tiles first thoroughly clean all stains on the floor tiles, if there is glue or sticky stains, you can use a neutral detergent and 3m scouring pad to wipe off. Splash the floor cleaner (please use according to the instructions) on the floor tiles, and use a waxing machine to rub the stains on the floor tiles clean. Then pour the water-based wax into a clean dry mop, and evenly coat the wax on the floor tiles.

Let the surface of the floor tiles dry after waxing, and only after drying can you step on it (you can use an electric fan to assist in drying, generally 8 hours after waxing will be completely dry), if there are heavy objects to move, you must wait for the wax to dry completely before moving, so that you can keep the light of the floor tiles.

After waxing many times, the surface of the floor tile turns yellow and wants to be re-waxed, it should be treated with a waxing agent, the method is as follows: the waxing agent is used directly, no need to add water, evenly sprinkled on the place to remove the wax, about 10-15 minutes, after the waxing agent penetrates into the floor tile, the floor tile is wet with water, and the wax needs to be completely removed, otherwise the wax will not shine again. After the wax is cleaned, please follow the above steps to clean and maintain.

First of all, it should be explained that the quality of the floor tiles you purchased is faulty, and the water impermeability is too poor. If this kind of problem occurs, you use a special cleaning agent for "100 billion jubilee" tiles (not oxalic acid) to scrub, and the effect is excellent.

This product you should have in the market where you sell floor tiles. It is usually produced in Guangdong.

The floor tiles you buy are not impermeable, (**cheap) only pay attention to them.

It is recommended that you use Toilet Cleaner, apply it to the stain, and wipe it with a damp cloth after 1-2 hours.

The quality of the bricks I bought is too poor, and I estimate that your bricks are no more than 20

These problems will occur if the quality of the brick is not good, and the water resistance is poor.

You can buy some tile cleaner and try it out.

Ceramic tiles are commonly used to decontaminate the soil.

1. Daily cleaning of ceramic tiles can be cleaned with dish soap, soap, etc.

2. Use soap and a little ammonia and turpentine to clean the tiles to make the tiles more shiny.

3. The polished tile should be waxed regularly, and the time interval should be 2-3 months.

4. If there are scratches on the brick surface, you can apply toothpaste to the scratches, and wipe them with a dry cloth to repair them.

5. The gaps between bricks and bricks can be removed from time to time with detergent, and then a layer of waterproof agent can be brushed on the gaps to prevent the growth of mold.

6. Sodium hydroxide or potassium bicarbonate solution is used for pollutants such as tea, coffee, beer, ice cream, and oil.

7. Ink, cement and other pollutants use dilute solutions such as hydrochloric acid and nitric acid.

8. Use special cleaners for paints, coatings and other pollutants.

Summary. The way to wipe the floor is as follows: 1. Wiping the floor with a wet rag and wiping the floor with a wet rag is the most common way to clean the floor.

The rag is in a semi-dry, wet state, so that the floor will not attract dust. Wipe it with a damp rag and then dry it with a dry rag so it's clean. 2. Mop the floor with laundry detergent, prepare half a bucket of warm water, and then add a small amount of laundry detergent to the warm water.

Soak a mop in laundry detergent water, then wring it out to mop the floor. After mopping once, mop it again with clean water and finally wipe it dry with a dry rag. Not only can it be cleaned, but it also has the fragrance of laundry detergent.

How to wipe the floor clean.

The way to wipe the floor is as follows: 1. Wiping the floor with a wet rag and wiping the floor with a wet rag is the most common way to clean the floor. The rag is in a semi-dry, wet state, so that the floor will not attract dust.

Wipe it with a damp rag and then dry it with a dry rag so it's clean. 2. Mop the floor with laundry detergent, prepare half a bucket of warm water, and then add a small amount of laundry detergent to the warm water. Soak a mop in laundry detergent water, then wring it out to mop the floor.

After mopping once, mop it again with clean water and finally wipe it dry with a dry rag. Not only can it be cleaned, but it also has the fragrance of laundry detergent.

3. Detergent mopping is similar to laundry detergent mopping, and detergent is very suitable for flooring. Pick a cleaner that is milder so it doesn't cause damage to your floor. 4. Mop the floor with rice water, spray the rice water on the floor, and then wipe it with a mop or rag.

Not only is it affordable, but it also has a good decontamination effect, which is a very good life tip. 5. Milk to wipe the floor, if there are stubborn stains on the ground that cannot be scrubbed, you can try to clean it with milk. Pour the milk on the dirt floor and soak for a short while.

Then wipe it repeatedly with a rag, and basically it will solve the problem.

Summary. Hello! We're glad to answer your questions!

Hello, the way to wipe the floor clean is as follows: tile floor: prepare a basin, add a spoonful of salt, a drop of dish soap, a few drops of fabric softener, you can also use shampoo or conditioner instead, and then drop a few drops of toilet water, do not add toilet water when there are pregnant women and infants at home!

Wooden floor: If it is a mopping wooden floor, you can squeeze a little lemon juice in the water, which can play a role in maintaining the floor, effectively preventing the floor from drying out and killing mold, and only need to add a little material to mop the floor and be labor-saving and clean.

How to wipe the floor clean.

Hello! We're glad to answer your questions! Hello, here's how to wipe the floor clean:

Tile floor: Prepare a basin, add a spoonful of salt, a drop of dish soap, a few drops of fabric softener, you can also use shampoo or conditioner instead, and then drop a few drops of toilet water, do not add toilet water when there are pregnant women and infants at home! Wooden floors:

If it is a mopping wooden floor, you can squeeze a little lemon juice in the water, it can play a role in maintaining the floor, effectively prevent the floor from drying out and killing mold, and only need to add a little material to mop the floor and save effort and clean.

Flooring, i.e. the surface layer of the ground or floor of a house. Made of wood or other materials. There are many classifications of flooring, and there are many classifications by structure:

Solid wood flooring, laminate flooring, three-layer parquet, bamboo flooring, anticorrosive flooring, cork flooring and the most popular multi-layer parquet, etc.; According to the use, it is classified as: household, commercial, anti-static flooring, outdoor flooring, special flooring for stage dance, special flooring for sports halls, special flooring for track and field, etc.; According to the classification of environmental protection level, there are: E0 flooring, E1 flooring, F4 flooring, JAS star standard F4 star flooring and so on.

There are many classifications of flooring, according to the structure classification: solid wood flooring, laminate flooring, three-layer parquet, bamboo flooring, anticorrosive flooring, cork flooring and the most popular multi-layer parquet; According to the use, it is classified as: household flooring, commercial flooring, anti-static flooring, outdoor flooring, special flooring for stage dance, special flooring for sports halls, special flooring for track and field, etc.; According to the classification of environmental protection level, there are:

E1 flooring, E0 flooring, JAS star standard F4 flooring, etc. In fact, as long as the substrate is stable, no cracking, no deformation, high environmental performance, heat preservation and heat conduction, even pure solid wood flooring, floor heating can be used.

Kiss! Hello, happy to answer your <>

1. You can use white vinegar to wipe it, first clean the stains on the surface of the floor, and then dip an appropriate amount of white vinegar with a soft cloth, and then use it to wipe the floor, so that the floor can become bright as new. 2. You can use rice water to wipe the floor, wipe the floor stains with a soft cloth dipped in rice water, and then wipe it again with a clean rag.

3. You can also use milk to wipe the floor, add an appropriate amount of white vinegar to the sour milk, and then use it to wipe the floor, which can also make the floor bright as new. 4. You can also use salad oil to wipe the floor, and put a few drops of salad oil into the mopping water, so that the floor dragged out is not only clean, but also very bright. Precautions for floor cleaning 1. When cleaning the floor, we need to pay attention to the details, such as the gaps between the bricks, and it is recommended to clean them regularly with decontamination cream.

Then, after cleaning, brush with a layer of waterproofing agent, which can effectively prevent the growth of mold in the crevices. 2. For daily cleaning of the floor, you can use dish soap or soap to clean it. If you are using soapy water for cleaning, you can add an appropriate amount of ammonia and turpentine to it, and then mix them together to make the cleaned floor more shiny.

Hope mine can help you <>

Do you have any other questions?