The best way to make up for leaks in the toilet is to make up for leaks in the toilet

Toilet leaks to make up for leaks.

If there is a leakage of the waterproof layer, you need to smash the tile and then reapply the waterproof layer, or you can also mix the gel-type waterproof material with water and lay it on the ground, so that the material can automatically find cracks to form a gel to achieve the purpose of leakage. If there is a gap in the waterproof pipe of the bathroom, you can use crystal porcelain waterproof material to brush the crack, and a transparent protective film will be formed after brushing, which can achieve the purpose of filling the leak.

The method of quickly repairing water leakage is as follows:

1. For the direction of ground flow to floor drain, cement mortar can be used to find the slope. However, in the process of finding the slope, it is necessary to pay attention to maintaining the flatness of its surface. The slope around the door should not be too large, but the slope around the floor drain should be large, so that the water on the ground can be discharged smoothly.

2. When decorating the kitchen and bathroom, pay attention to protecting the original waterproof layer to avoid damaging it. If the waterproof layer is accidentally damaged, then it must be repaired even to avoid leakage problems in the future.

3. For the location of the water leakage is very obvious, it can be repaired directly by using the plugging king. However, for water leaks that are not obvious and the area is large, it is necessary to deal with them with caution. It is necessary to chisel off the tiles on the ground, do a good job of base treatment, and then re-do the waterproofing as a whole.

When repairing waterproof leaks, it is also necessary to pay attention to the width and height of the coating surface.

4. There are many reasons for water leakage in the house, and when we deal with it, we must first determine the cause of water leakage. Then according to this reason, the appropriate treatment scheme and leakage material are selected, because different leaks, it uses different materials and construction methods.

Summary. The best way to repair leaks in the toilet is to buy a penetrating waterproofing agent, pour it on the floor after adding water, spray it on the wall, and brush it on the pipe joints, tile gaps, floor drains, etc. Wait for the permeable waterproofing agent to dry naturally, and clean the jelly-like waterproofing agent on the tiles after 24 hours.

Toilet leaks can be repaired with special glues such as glass glue and waterproof glue. If there is a leak in the toilet, tile, wall corner and other parts, you can use glass glue to fill the leak; If there are cracks in the ground and the waterproofing is not treated well, waterproof glue can be used to fill the leakage; If the water leakage is already serious, the waterproof glue will not play a role at this time, and the waterproofing needs to be redone.

Are you there. The best way to repair leaks in the toilet is to buy a penetrating waterproofing agent, pour it on the floor after adding water, spray it on the wall, and brush it on the pipe joints, tile gaps, floor drains, etc. Iso-permeable waterproofing agent is naturally dry, and the jelly-like waterproofing agent on the tile is cleaned after 24 small containments.

Toilet leaks can be repaired with special glues such as glass glue and waterproof glue. If there is a leak in the toilet, tile, wall corner and other parts, you can use glass glue to fill the leak; If there are cracks in the ground and the waterproofing is not treated well, waterproof glue can be used to fill the leakage; If the water leakage is already serious, the waterproof glue will not play a role at this time, and the waterproofing needs to be redone.

Using waterproofing agent and caulking paste, you can make the surface of the bathroom waterproof, of course, before the operation must be cleaned first, and then wait for drying, and then operate, once is not enough, you can apply twice. If the waterproof is useless, you can directly replace the pipe, but this project is more complicated, and you need to seek professional technicians to repair. It is important to pay attention to the maintenance of water pipes, so that they will last longer.

Reasons for this:

1. If the toilet is leaking, then it is most likely because the waterproof layer of the toilet is not done well, so when it is used, there will be water leakage.

2. Maybe when decorating the house, the various materials used in the toilet are not very good, and the workers cut corners when they are working, and they do not do some work to the extreme, which leads to a series of subsequent problems.

3. It may also be because the decoration time is too long, and the pipeline has been used for a long time, and at the same time, there are no protective measures when using it, resulting in aging and wear of the pipeline inside.

1. The main water pipe of the toilet is leaking. In this case, the best way to do this is to replace the fittings of the water pipes. Under normal circumstances, the material of the main water pipe used in the bathroom is PVC pipe, and the biggest disadvantage of this pipe is that under the action of long-term water pressure, the interface will leak, so it is necessary to close the water valve first, and then replace the interface of the water pipe.

2. The wall of the toilet is leaking, and the waterproof layer of the wall needs to be repaired. There is often stagnant water oozing out of the wall of the toilet, in this case, the way to not leak waterproofing is to repair the waterproof layer of the wall.

Bathroom leakage maintenance program diversification, each scheme corresponding to the construction process is different, there are smashed bricks to redo waterproofing, there are no smashing bricks nano penetration, there are punching grouting maintenance and other programs, see how the owners and friends choose, the convenient and fast operation plan is to avoid smashing bricks, does not affect the original building structure, I hope to help you!

There are many reasons for water leakage in the bathroom, so the first thing to do is to find the best water leakage and determine what the cause of the leakage is. The specific reasons are as follows:1

Pipeline leakage, if there is a leak in the internal pipeline of the building waterproof layer, then there is no way but to pry open the waterproof layer and repair the pipeline. If the external water supply pipe is leaking, repair the pipe and apply waterproof material to the wall. 2.

Another situation is that the ground seeps water, according to the traditional method is to dig tiles, break the waterproof layer, re-make the waterproof layer, and then lay the tiles. After the waterproof construction is completed, the construction site cannot be drenched with water within 24 hours. That's probably it, just for reference, I hope it can help you solve the problem as soon as possible.

Waterproofing is an important part of home decoration, under normal circumstances, the bathroom, the kitchen floor must be waterproof, but the bathroom is still leaking what to do? 1. Try not to damage the original waterproof layer

If the original waterproof layer is not damaged, there will generally be no leakage after moving in. However, the waterproof layer is easy to be damaged when renovating the ground, and if it is accidentally damaged, it should be repaired in time to avoid leaving hidden dangers.

2. Re-paving floor tiles should be waterproofed

If you need to replace the original floor tiles in the bathroom, after chiseling off the original floor tiles, you must first level the ground with cement mortar and then do waterproof treatment. Repeat 2 to 3 times with polyurethane waterproof paint.

3. Be sure to do wall waterproofing:

Water splashes on adjacent walls during bathroom bathing, so be sure to waterproof the walls before laying wall tiles. In general, the wall should be waterproofed with a height of 30 cm, but for the non-load-bearing light wall, the whole wall should be waterproofed, at least to be meters high. At the same time, it should be noted that the waterproofing of the wall adjacent to the shower position should also be meters high.

4. The groove of the water pipe in the wall should also be waterproofed

During the construction process, when pipelines and floor drains pass through the floor slab, the waterproof layer around the holes must be carefully constructed. The buried water pipe in the wall should be reasonably arranged, and the water pipe should be made with a groove larger than the pipe diameter, and the plastering in the groove should be smooth, and then the groove should be brushed with polyurethane waterproof coating.

hours "closed water test" acceptance waterproof:

After the waterproofing project is completed, seal the door and the drain, fill the bathroom floor with water to reach a certain liquid level height, and make a mark, if the liquid level does not drop significantly within 24 hours, there is no leakage on the roof of the downstairs house, and the waterproof is qualified.